diablo cam 2 and azbox

[andy]

i have had an azbox elite for 6 months now but have only used it for FTA feeds
and this is the first time i have ever used a cam i followed the prog diablo thread and got the Ipnosys 7 file loaded and the keys on it but i am stuck now i put it in the slot and changed the config to

Language [English]
Caids File [CAIDS]
Auto PMT [ON]
Emulators [ON]
N2 AU [OFF]*
Emulators Priority [1:Emu-2:Card]
Fixed CW [OFF]*
SmartCard Mess [Show Never]

i cant open any channels with it still comes up scrambled

i am probably doing something very basic wrong
should the channel unscramble when i put the cam in the slot or do i have to do something else to make it clear

i tried a few suggestions from members in the diablo section but stil cant get it to work

[jumbotroll]

Try to reboot the box with the cam inserted?
If you push Menu botton and Common Interface do you see the Diablo cam?

I have tested Diablo WIFI module on my AZbox Premium Plus and it's working, but have some lagging pictures.

Jumbotroll

[andy]

ive tried re booting a few times

when i go into common interface it has
not installed in the top one
IPNOSYS0.07 in the bottom one

[andy]

I was told in the azbox forum that i needed a TD0071 model to be able to have diablo cam and my model was TD0063 i then sent it away to get it upgraded to be able to take diablo cam and got it back this week

i can read the IPNOSYS 007 menu inthe CI does that now mean that the upgrade to the box worked and i can now use diablo cam with it
or can there still be aproblem with the box working with diablo cam

[jumbotroll]

Maybe AZbox don't like Diablo Cams.
My Diablo WIFI is working, but have pixels and lagging in pictures.
I have AZbox Premium Plus with TD0088...

Jumbotroll

[xanadu]

Early Azbox HD need modifications to tuner and motherboard to work with Diablo CAM.

https://www.satpimps.co.uk/showthread.php?t=113280&highlight=diablo+opensat

[denton]

i then sent it away to get it upgraded to be able to take diablo cam and got it back this week

Who did this for you and what did it cost?

[xanadu]

Who did this for you and what did it cost?

The dealer that supplied your receiver should do this for free.


If you bought your receiver from Impex-sat or one of their dealers there is also an option to upgrade to Premium Plus.
60 Euro for single tuner, or 129 Euro for dual tuner. Offer ends 31/03/2010


http://opensat.de/images/stories/azboxhd/formulare/Austausch.pdf

[andy]

i originally bought it at *****************

but i got lee at goldwafers to get someone to do the upgrade

[andy]

i can read the IPNOSYS 007 menu inthe CI does that now mean that the upgrade to the box worked and i can now use diablo cam with it
or can there still be aproblem with the box working with diablo cam


anyone know the answer to that Q ??

[denton]

The dealer that supplied your receiver should do this for free.


Says who?
My supplier asked for £35, then referred me to OpenSuck and they simply failed to reply to my emails.

[xanadu]

Says who?
My supplier asked for £35, then referred me to OpenSuck and they simply failed to reply to my emails.

This was posted last year.....


ok, so this is how it's gonna be! every reseller is gonna receive material to do the fix, and formation, on how to do it! starting august.

it will be free for every clientes, it will take aprox 10 days, u send to dealer...dealer fixs it, and send it back to you. maximum 10 days.



from this moment , all azbox hd will have a new revision REV 4, will be built, with this modification. to accept all cams. the rest is the same! same box, hardware, firmware, etc.


this will begin during august.

[denton]

My statement is FACT.
Your quote is hearsay.

Anybody here actually get their box fixed for free?