Technomate TM7100 8281 menu

[skilcom]

can some one please tell me how to access the 8281 menu on my new Technomate TM7100 , I have loaded the latest magic patch , I have done a factory reset and powered off for 30 seconds, presently scanning channels , after the channel scan what do I do to access the 8281 menu ?


All help appreciated

[Giga]

need to add the last add-on and from viewing a channel, on the RCU enter that channel number: 8 2 8 1 Ethernet (https://www.satpimps.co.uk/showthread.php?t=114462) <= click here

[skilcom]

where can i get the add on ?

[Giga]

7.13p: ADDON_002p 6000 HD Super & 7100 (https://www.satpimps.co.uk/showthread.php?t=124860)

[skilcom]

Thanks Giga, some times its hard to see the wood for the trees!

[Giga]

agreed, sometimes tracking issue

[Blu-ray]

Hi, i have a tm 7100 and loaded addon patch ok, press 8281 up comes (NAME SERVER+++++), i have a c.line wich goes something like this = c: freeshare.dyndns.tv.56071 jbhod ffggsd and this is where i get lost, can somebody tell me what i put in (NAME SERVER+++) then cccam, time out 1sec, filter mode auto, (ID++++) (PASSWORD++++) DES.KEY0102030405ect, (ADDRESS+++++) (PORT++++) what part of c.line goes where in the brackets please,its taken me a week to get this far and iam ready to give up, all help appreciated and will donate.

[Giga]

what part of c.line goes where in the brackets please,its taken me a week to get this far and iam ready to give up, all help appreciated and will donate.
did you read this:
https://www.satpimps.co.uk/showpost.php?p=645086&postcount=4

[Blu-ray]

yes still could not figure out what went where !, i need A.B.C for newbie

[Giga]

(NAME SERVER+++++) name for service so you can recognize what it is (anything what you want)
cccam or newcamd the protocol used by server
time out = 7 sec
filter = Auto unless you specified a filter
(ID++++)= jbhod
(PASSWORD++++)= ffggsd
(ADDRESS+++++)= reeshare.dyndns.tv
(PORT++++)= 56071
DES.KEY= 0102030405ect


all help appreciated and will donate.
keep you on this promise, meanwhile you can hit a couple of these: https://www.satpimps.co.uk/images/styles/soness/buttons/post_thanks.gif

see also here:
https://www.satpimps.co.uk/showpost.php?p=683005&postcount=1

[Blu-ray]

Thanks will try after t will let you know how i get on

[Giga]

use recent server info, if not connecting try another one, still not connecting could be similar problem check this out:
https://www.satpimps.co.uk/showpost.php?p=726322&postcount=3

[Blu-ray]

Hi, still cant connect, ip address 192.168.1.3 subnet mask 255.255.255.0 gateway 192.168.1.1 dns 192.168.1.1 any more help to connect would be appreciated,

[Giga]

Are you using DHCP on other devices in your home network? don't touch these
If you're using static IP's (manually set), set these to DHCP.
do you know how to change the IP range in your router?
Don't start without being sure what you are doing, you can loose your internet connection!
Take note of your router settings on paper before changing anything!
Take backup of your router settings
have you're computer first set to DHCP, if your computer is using static ip address! other wise you can not connect to your router!

If this is like abracadabra to you what follows, stop and get some help: friend with network knowledge!

change home network (router, computers, ...) to operate in these settings
router address: 192.168.123.254
subnet mask: 255.255.255.0 (all connected in home network segment)
if you use DHCP for assigning IP addresses, range should be 192.168.123.7 to 128. Router cannot giveaway technomate ip address.
Technomate: 192.168.123.006
subnet mask: 255.255.255.0
Gateway: 192.168.123.254 (point to router)
DNS: 192.168.123.254 (point to router)
either have other devices connected by DHCP or give each static IP's (check you don't use IP's taken by other devices)

[Blu-ray]

give it a try

[Blu-ray]

trying another Cline

[Giga]

if it is recent and you don't get connected, check logs of your router if any traffic from or to the technomate is blocked (check by technomate IP address or MAC address

[Blu-ray]

thanks can you give ABC instructions in router

[Giga]

if you have access to the router, normally you find help on each web page of it.
if the router blocks traffic to your Technomate (https://www.satpimps.co.uk/showthread.php?p=714820) <= click here

[Blu-ray]

Hi, This is for all members who want to check to see if the port Number they where given for there c.line test is open or closed, this way you do NOT spend hours barking up the wrong tree, tm 6800/6900/7100 receivers with no connection after loading c.line should down load this free piece of software from http://portforward.com,it can also setup port forwarding for you in your router.i done a quick test on my c.line port and it was blocked so i hope this will solve all my probs i have had with my tm7100.

[Giga]

Could you make a connection?
Normally Port forwarding is only needed for Server (outgoing traffic, you sharing your card to others)
TM is client (incoming traffic), Routers nowadays can block in both ways: so it is important to see what the logs tell you what the router did with the traffic from and to the Technomate. It is a slow process: step by step and eliminating all possible causes. So I would not call it: Barking up the wrong tree

[Blu-ray]

Any body want a cheap tm 7100

[Blu-ray]

Hi Giga, Your donation ££££££££££ has been sent as promised, keep up the good work.

[Giga]

Any body want a cheap tm 7100
guess then this offer is no longer standing?

[Blu-ray]

No, still cant understand why someone would send a fake c.line.