How to enter keys manually

[spiderlover]

Go to Accessory menu - key edit.
Reset key data.
Select key edit.
Scroll to The encryption type.
Select the key you want to edit.
Press the red button to modify.
Enter the key
Save

[echelon]

Entering BISS keys on Spiderbox HD models

There has been a lot of discussion on this topic and I tried yesterday and it was not quite as straightforward as some suggest, mainly as there doesn't seem to be a key for the Spiderbox in the Biss section and no sticky on how to do it - I checked the latest spiderbox softcam but there was no PLTV in there so it obviously had to be done manually.

Firstly you need to find the current key - go to Forum - Biss and choose the channel you want from the BISS key list - for instance PLTV. This will give a whole range of boxes and cams and the codes to be input - as spiderbox was not there in this case we have to look for the common 16 digit code to the majority of the codes shown - this can be shown as eight sets of two digits which makes it easier to identify - for instance look at the last sixteen digits in eight sets of two in the line starting: For CCcam & Newcamd (constant cw) :

Next, to enter the code:

1: go into Menu
2: Choose USB menu
3: Choose Key Edit
4: Key Edit at top of list should be highlighted, press enter
5: At the top you will see CAS type and Viaccess - scroll left and you should find the Biss menu
6: press yellow to add a new key
7: Enter the frequency of the channel - for PLTV this would currently be 11387
8: Scroll down to the Key Data line and enter the sixteen digits you obtained earlier and save.
9: Exit menu - If channel doesn't clear restart box

And that should be it. You can also find the code by downloading a softcam for another box, opening in wordpad and finding it in the list.

Hope this helps someone

Frank Zapper

-----------------------------------------

so thats

go into the menu and find accessory - key edit and press ok

press ok on key edit at the top

click left arrow button once from viaccess to biss

go up until you come to 11387 and highlight it and red button (modify)

go down to keydata and click ok

then put in the new keys , exit and save (47 ** ** ** ** ** ** 7D from 09dec2012)

the pltv channel on 10e will open again

done