Help needed TM 6900 HD Conbi Super

[B.M.]

hello everyone.

im really really going round in circles trying to get my new TM 6900 HD Conbi Super up ive just bought.

well its second hand not new and must have an image or soemthing on because i can get BBC,ITV etc etc on it but thats about it.

ive got an eagle reciever but i thought it was time to go HD and got this cheap but i regret it now because its worlds apart from an eagle box and im going backwards reading all the info onthese TM's.

is there a dummies and i mean dummies guide for me to get this going please because all the different things ive read are confusing me even more and i really could do with some advice and pointers on how to get me fixed up.

ive sussed out and got my motor moving and stuff but i really cant understand how to get the keys/softcam and other files across to the box.

with the eagle i just FTP'd everything across really easy but with this i really dont know where to start.

any help would be welcomed and very much appreciated.

cheers

BM

[Plessy]

hello everyone.

im really really going round in circles trying to get my new TM 6900 HD Conbi Super up ive just bought.

well its second hand not new and must have an image or soemthing on because i can get BBC,ITV etc etc on it but thats about it.

ive got an eagle reciever but i thought it was time to go HD and got this cheap but i regret it now because its worlds apart from an eagle box and im going backwards reading all the info onthese TM's.

is there a dummies and i mean dummies guide for me to get this going please because all the different things ive read are confusing me even more and i really could do with some advice and pointers on how to get me fixed up.

ive sussed out and got my motor moving and stuff but i really cant understand how to get the keys/softcam and other files across to the box.

with the eagle i just FTP'd everything across really easy but with this i really dont know where to start.

any help would be welcomed and very much appreciated.

cheers

BM


Very Informative and friendly first post .

Getting the motor working on the Arch is a Major achievement in itself so take a bow....

Unfortunately I don't own a 6900 HD version , but I hear the quality of the product is very good and performance also a A+ in the features department.

I also don't know anything about Eagle box's !

But I am sure that buy being patient and informative toward other users , you will soon have it running smoothly.

Regards:respect-051:

[B.M.]

thanks mate.

i did actually post my first post in the introduction section but dont know why it didnt show as a post ?


anyway thanks for the kind words :-)

[echelon]

I believe the 6000 is usb and the loading procedure for a tmsoftcam should be exactly the same as for a 5000 usb model , so take a look in the sticky sections and tools sections of both the 6000 and 5000 series models here

you will also find the tmsoftcam posted in the public section or in one of the tm sections , as its the same tmsoftcam for all the non-linux tm models

and if it has ethernet on it then you should take note of the posts telling you how to use it with say a C line or whatever they use using 8281

I am sure if you have a good read of both forums there will be plenty of info on it

[Plessy]

No Worries M8 ! Yer Welcome.

Its probably cause your a Junior Member.

I had similar issues when first joining,

I am Not Trying to sell you anything and/or Twisting your arm but I think you would have to agree the the Crew Around Here work really hard in keeping this Forum Alive with Top Notch info,,,,,,

and if you really want 24/7 info, A small contribution makes many a Wonder ....

As a matter of fact I must check with Kink to see when my subscription expires..... lol

Regards

[B.M.]

thanks lads...excellent info and im feeling a bit calmer now that ive posted because i was worried people would think i was being lazy but i honeslty didnt uderstand stuff i was looking for but ive got a great starting point now.

i will also mooch on other none satellite related stuff on here because i might be able to put a bit back into this place with stuff i can help with.

thanks

BM

[Giga]

Welcome & enjoy Satpimps. This would be the forum where you find most interesting (stickies) Always make sure you're relating to the correct model Super or non-super when flashing patches (firmware) do test before your current null modem cable with your computer so you have a working solution, just in case something goes wrong.

[B.M.]

ok after reading and reading ive managed to get a patch on and a softcam.

ive read more and ive installed DCC and TCC but it wont connect to DCC at all and ive put the username as root and left the password blank.

the ip addy of the box is recognised as what it is but i keep getting this error...

ERROR 10057 in function send socket is not connected

so im now stuck unless anyone has had this problem and can help ?

many thanks

BM

[echelon]

I wouldnt have thought that dreambox tools or tm9100 tools would work to this box , especially as its not a linux box like a dm800HD or a tm9100

dunno why you are even trying that approach

the fact is that normally you connect using a null modem and serial com port connections , like dreamup on a dmm , but using the darkman tm1500 loader , or usb as you have now done

its also worth pointing out that the patches for this box have now ceased , along with its brothers and sisters too , but tmsoftcams will continue for the time being

[B.M.]

thanks mate.

i read a post on here about trying to put a C LINE on and to do so you have to use DCC ??

im familiar with DCC because of my eagle box but i get that error "ERROR 10057 in function send socket is not connected "

i dont really want to patch it seeing ive got channels like like BBC,ITV etc clearing but i just wanted to put a c line on

[echelon]

I dont have a tm6000 series box , but I would assume its done either using the usb stick or by the remote control

[B.M.]

aaah i see what you mean about it wont connect to this because its not linux mate.

so how do i go about getting the cline on ?

[echelon]

see my previous reply

[B.M.]

see my previous reply

yeh we posted at the same time mate lol

i will see if i can suss out how the c line can be put on be it remote or USB stick.

i know i should just have got a dreambox

thanks mate

[echelon]

seems you havent read enough posts on here yet as I found this one within 2 minutes of looking

https://www.satpimps.co.uk/showthread.php?t=126288

text file , usb stick , transfer

[Plessy]

ok after reading and reading ive managed to get a patch on and a softcam.

ive read more and ive installed DCC and TCC but it wont connect to DCC at all and ive put the username as root and left the password blank.

the ip addy of the box is recognised as what it is but i keep getting this error...

ERROR 10057 in function send socket is not connected

so im now stuck unless anyone has had this problem and can help ?

many thanks

BM
-------------------------------------------------------------
:sifone: Ace's !:bravo-009:

but you lost me with "ive read more and ive installed DCC and TCC but it wont connect to DCC at all and ive put the username as root and left the password blank."

Ya Have Lost me there already ! TCC and DCC. ? (Routers?)



Great to hear your still cracking at it! :bravo-009:

I recomended a TM to an old n old pal not long back...
And Yip they got the GLX,GTI, TWINCAM Supercharged Model with the auxillary bits thrown in... Handy Price delivered brand new to the door. with all the frilly bits !

Patched it and Got the Softcam up and running for them,successfully via usb but I couldn't get my head around the remote control in comparison to 5400 Super unit.... Then again Your probably two steps Ahead of me !

:respect-051:

[B.M.]

seems you havent read enough posts on here yet as I found this one within 2 minutes of looking

https://www.satpimps.co.uk/showthread.php?t=126288

text file , usb stick , transfer

cheers mate.

im not being lazy its just im used to linux boxes now and im really sorry i bought this bugger now.

its totally different from what im used to and thats why im struggling a bit and thats why i was pretty scared of asking for help in the first place because i never just go onto forums just to get info and go.

in fact i love contributing on forums and get to know peeps and i remember your name froma previous place many moons ago where i used to help out :-)

thanks once again

BM

[sheild 10]

it quiet easy m8 just find the tm6000 super firmware then the add on then softcam and put on to usb stick and load then with usb on the tm

[B.M.]

-------------------------------------------------------------
:sifone: Ace's !:bravo-009:

but you lost me with "ive read more and ive installed DCC and TCC but it wont connect to DCC at all and ive put the username as root and left the password blank."

Ya Have Lost me there already ! TCC and DCC. ? (Routers?)



Great to hear your still cracking at it! :bravo-009:

I recomended a TM to an old n old pal not long back...
And Yip they got the GLX,GTI, TWINCAM Supercharged Model with the auxillary bits thrown in... Handy Price delivered brand new to the door. with all the frilly bits !

Patched it and Got the Softcam up and running for them,successfully via usb but I couldn't get my head around the remote control in comparison to 5400 Super unit.... Then again Your probably two steps Ahead of me !

:respect-051:

yeh my biggest error was when i searched for the TM 6900 and for the problem i have and the search result was for the TM9100(i think) but i didnt see it was the wrong model and thats where i got all at a flap mate.

i will get there i really will...or i will sell the bugger lol:respect-055:

[echelon]

it quiet easy m8 just find the tm6000 super firmware then the add on then softcam and put on to usb stick and load then with usb on the tm

he has done the softcam already , its the c line input he needs now , and a quick hunt around this forum shows me its done using usb stick or remote control

I do understand you are confused BM , so for that I sympathise , but you are confusing yourself by treating it like your eagle

I have a tm1500 , and a tm9100 , and a dm800 , so know there are big differences

forget the ethernet port apart from connecting to dyndns etc

usb is used on this machine , with serial loading as a backstop if you brick it

just look for the info like I pointed you at and you should get there , as your eagle is more complicated than this dumb box ( non linux )

the tm9100 is SD only , not HD , so wont give you any more than the eagle did

[B.M.]

he has done the softcam already , its the c line input he needs now , and a quick hunt around this forum shows me its done using usb stick or remote control

I do understand you are confused BM , so for that I sympathise , but you are confusing yourself by treating it like your eagle

I have a tm1500 , and a tm9100 , and a dm800 , so know there are big differences

forget the ethernet port apart from connecting to dyndns etc

usb is used on this machine , with serial loading as a backstop if you brick it

just look for the info like I pointed you at and you should get there , as your eagle is more complicated than this dumb box ( non linux )

the tm9100 is SD only , not HD , so wont give you any more than the eagle did

yeh my biggest boo boo was when i searched for the cline and for my model number and it came back as a TM9100 without me seeing it was the wrong model and i just tried to follow the instructions.

well ive just loaded the cline on my usb and i will go from there mate and i really appreciate your patience i really do.


BM

[echelon]

just found the correct info you required here

https://www.satpimps.co.uk/showthread.php?p=692003

from this thread here

https://www.satpimps.co.uk/showthread.php?t=124692

in the technomate forum here

https://www.satpimps.co.uk/forumdisplay.php?f=40

[Plessy]

Echelon !

They must be paying you serious overtime tonight ! lol :-)



usb is used on this machine , with serial loading as a backstop if you brick it

just look for the info like I pointed you at and you should get there , as your eagle is more complicated than this dumb box ( non linux ):respect-040:

the tm9100 is SD only , not HD , so wont give you any more than the eagle did[/QUOTE]

Sláinte ! :respect-020:

[B.M.]

anyone want to buy a TM6900 ? lol

ive just tried to learn japanese but failed - i cant get my head round the 8281 menu

ive created the c line on a text file and and put it on the usb stick and tried to load in to the file transfer and it said Invalid text file.

i pressed the red button and it created a file on the usb stick called 6900HDSUPER_722p.STB

ive tried following where it says about the 8281 menu but cant get my head round it despite the links above.

i seem to have a mental block here now and i get the feeling im so near but yet so far ??

[Plessy]

i pressed the red button and it created a file on the usb stick called 6900HDSUPER_722p.STB

This is your Backup File.

So if All Fails with what ever you do between here and now ?
You can revert back to this as a first step....

For 5400 Super its "8280" Brings up BISS Menu

me back's playing up again after the old bike ?

Should i go to a massage parlour or a faith healer ? :-)

[echelon]

those posts say this can happen if you use a word editor instead of notepad

I use notepad plus for jobs like this though

sounds like you did the file transfer the wrong way or on the wrong section , especially as you backed up your firmware to an stb file ( set top box )

did you look at that post I gave you where giga explained it with pictures ?

https://www.satpimps.co.uk/showthread.php?t=114462

[sheild 10]

i have a tm6900 super combo but i not sure on how much we are alowed to say so i did not say to much
i dont want a ban for trying to help some one there is more i was hopeing a admin would tell him:respect-055:

[B.M.]

those posts say this can happen if you use a word editor instead of notepad

I use notepad plus for jobs like this though

sounds like you did the file transfer the wrong way or on the wrong section , especially as you backed up your firmware to an stb file ( set top box )

did you look at that post I gave you where giga explained it with pictures ?

https://www.satpimps.co.uk/showthread.php?t=114462


yes mate and im pretty sure now im not going to be able to do this and im seriously thinking of binning it and getting a linux box that im more comfortable with.

i think this box is out of my league and im just going round in vicious circles lol

i will take another look at it and really its only simple(no me lol ) if you have done one of these before and vice versa if someone hasnt done a linux box before.

my head hurts..paracetamol anyone ?

cheers

BM

[echelon]

i have a tm6900 super combo but i not sure on how much we are alowed to say so i did not say to much
i dont want a ban for trying to help some one there is more i was hopeing a admin would tell him:respect-055:

you can give him as much technical help as you wish to , the only rule being you do not use actual server details etc , just examples like giga did

so no urls , no servers , no actual port numbers , no actual usernames or passwords

other than that explain whatever you like

[B.M.]

i have a tm6900 super combo but i not sure on how much we are alowed to say so i did not say to much
i dont want a ban for trying to help some one there is more i was hopeing a admin would tell him:respect-055:

well if you can make it much more simpler for a simple lad like me it would be more than appreciated mate if you have knowledge on this ?


Cheers

BM

[Plessy]

i not sure on how much we are alowed to say so i did not say to much ,,,,,


Ahh Shure Look Lads !

If B.M. Can't help himself ? Then who are we to judge ?

My only regret is not thinking further ahead, long before the situation ever happened.:-)
At least the weather's gonna be warmer next few days....

Time for some out door activity ! :-)

[echelon]

post 11 in this thread https://www.satpimps.co.uk/showthread.php?t=114462 has all the details and a file you can download with a sample in it

surely you just edit it in notepad plus , save it to usb stick , and load it as explained by giga in that post 11

seems easy enough to me

[B.M.]

post 11 in this thread https://www.satpimps.co.uk/showthread.php?t=114462 has all the details and a file you can download with a sample in it

surely you just edit it in notepad plus , save it to usb stick , and load it as explained by giga in that post 11

seems easy enough to me



thanks mate will give it a whirl now:bowing-036:

[B.M.]

nah im still stuck

i think i need fresh eyes and mind after a sleep as ive been trying to do this since 8am this morning and mental block isnt the word now.

so i will have another go tomorrow and i might even need a new remote(slipped out of my hand when i couldnt do it lol )

i just want to say though i really appreciate your help lads and i know you must be banging your head againt the wall with my thickness but i really cant help it so im saying sorry for me not grasping something that is so easy to do for experienced lads like yourselves.

so will try again in the morning

cheers

BM

[Giga]

RCU = Remote Control Unit
while viewing a channel select channel 8 2 8 1 with the RCU; server list should be showing:
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/703p/703p001ServerList.jpg
press exit
download the file: CS info List.txt put this on the USB stick in the root \
place usb stick on TM-6900HD Super
press USB on RCU (left above menu)
select Data Transfer
in the file list select CS info List.txt and press ok
Window should show shortly: CSINFO update, reading, writing OK
press exit
select channel 8 2 8 1 and you should see now the modified information.
If this did not work: report back here Else if this works:
you can use that file with the notepad editor and change the relevant information
don't change the label: [CS Information]
more info: https://www.satpimps.co.uk/showthread.php?p=692003

[Giga]

i pressed the red button and it created a file on the usb stick called 6900HDSUPER_722p.STB
that patch (6900HDSUPER_722p.STB) was already on your USB stick, you put it there to patch the TM.
when pressing the red button: Upload Channel, it saves your channellist on the USB stick and you see a file with this name construction:
20100409-075042.CNDF
2010 = Year
04 = Month
09 = Day
-075042 = Time you saved the file
.CNDF file extension for Compressed Channel Data File

Upload means for Technomate save to USB
Downloading in Technomate: select the file in file list and press OK
can you check in the Main Menu RCU: menu the System Information?
Model: ?
S/W Version: ?

[B.M.]

RCU = Remote Control Unit
while viewing a channel select channel 8 2 8 1 with the RCU; server list should be showing:
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/703p/703p001ServerList.jpg
press exit
download the file: CS info List.txt put this on the USB stick in the root \
place usb stick on TM-6900HD Super
press USB on RCU (left above menu)
select Data Transfer
in the file list select CS info List.txt and press ok
Window should show shortly: CSINFO update, reading, writing OK
press exit
select channel 8 2 8 1 and you should see now the modified information.
If this did not work: report back here Else if this works:
you can use that file with the notepad editor and change the relevant information
don't change the label: [CS Information]
more info: https://www.satpimps.co.uk/showthread.php?p=692003


ok im a tiny step forwards wth huge thanks

ive got in the menu and ive got the file CSINFO and opened it up on my computer.

name: ive put a name here that i know
user: ive not been given a login for the server
password:no password needed for the CS
protocol:ive put the C line here
deskey: where will i find this ?
port: where will i find this also ?

and on top of that it asks for ip addy so ive put the ip addy of the box where it asks.

i hope im moving a bit forwards anyway ???

cheers lads

BM

[echelon]

ok im a tiny step forwards wth huge thanks

ive got in the menu and ive got the file CSINFO and opened it up on my computer.

name: ive put a name here that i know
user: ive not been given a login for the server
password:no password needed for the CS
protocol:ive put the C line here
deskey: where will i find this ?
port: where will i find this also ?

and on top of that it asks for ip addy so ive put the ip addy of the box where it asks.

i hope im moving a bit forwards anyway ???

cheers lads

BM

you should have a name and password for the server in the c line you have been given by the server admin

in that c line will be the name , password , port number , des key etc

the protocol is CCCAM in capitals like the example in the text file , so only CCCAM will go in there

basically you dissect the c line you have been given and copy and paste the relevant parts into that example

the deskey is probably the same as the example

the port number etc will be given in the c line

so you would add the name that you recognise for the server

the username

the user password

the port number

[echelon]

ok im a tiny step forwards wth huge thanks

ive got in the menu and ive got the file CSINFO and opened it up on my computer.

name: ive put a name here that i know
user: ive not been given a login for the server
password:no password needed for the CS
protocol:ive put the C line here
deskey: where will i find this ?
port: where will i find this also ?

and on top of that it asks for ip addy so ive put the ip addy of the box where it asks.

i hope im moving a bit forwards anyway ???

cheers lads

BM



here is what I would say in this matter as an example

lets say the c line looked like this

C: satpimps.gotdns.com 12345 pimp1 pimp1password yes

then this is how you would dissect and paste it in

name: Satpimps1
ip:satpimps.gotdns.com
user:pimp1
password:pimp1password
protocol:CCCAM
deskey: 01 02 03 04 05 06 07 08 09 10 11 12 13 14
port: 12345


I hope that clarifies it a bit more

[B.M.]

you should have a name and password for the server in the c line you have been given by the server admin

in that c line will be the name , password , port number , des key etc

the protocol is CCCAM in capitals like the example in the text file , so only CCCAM will go in there

basically you dissect the c line you have been given and copy and paste the relevant parts into that example

the deskey is probably the same as the example

the port number etc will be given in the c line

so you would add the name that you recognise for the server

the username

the user password

the port number



ok ive done that and i wouldnt have guessed that in a million years mate lol

after i edited the details which i will show as an example only and not what the details are so the example below is a dummy one(if its not allowed then sorry and delete it)


name:Peters.dyndns.org
ip: 192.168.0.10
user: joebloggs
password: abcdefg
protocol: CCCAM
deskey: 01 02 03 04 05 06 07 08 09 10 11 12 13 14
port: 9821


does this look right or not ?


cheers


BM

[echelon]

check my previous answer as I have amended it after comparing it to the info text file

[echelon]

name: Satpimps1
ip: Peters.dyndns.org
user: joebloggs
password: abcdefg
protocol: CCCAM
deskey: 01 02 03 04 05 06 07 08 09 10 11 12 13 14
port: 9821


does this look right or not ?


cheers


BM

check my amendments above and try them out

[B.M.]

check my amendments above and try them out

well im pretty sure ive done what you said mate but nothing is clearing - does it normally take time for it to clear or should it clear straight away ?

BTW i really appreciate all the time and effort helping me with this as with my eagle i just dropped the c line on a text file and away it went with no dissecting it(i know its totally different with this)

so yeh tthanks for the help

[echelon]

well im pretty sure ive done what you said mate but nothing is clearing - does it normally take time for it to clear or should it clear straight away ?

BTW i really appreciate all the time and effort helping me with this as with my eagle i just dropped the c line on a text file and away it went with no dissecting it(i know its totally different with this)

so yeh tthanks for the help

I would have thought that if its correct it should work within seconds like the eagle , assuming you have done it all correctly

I dont have your box so cannot test it , but its similar on the icecrypt as you can see from this post here

https://www.satpimps.co.uk/showthread.php?t=128716

[B.M.]

yep just checked it again and it does seem ive done it right but nothing - the cline is deffo working as ive just loaded it back onto the eagle and it fired up straight away.

so near buy yet so far lol

i know its cheeky but you accept a PM to take a look and see if theres something obvious that i cant see mate?

[B.M.]

hello lads.

well well well

im up and running - dont ask me how but i am and the only thing i really did that was different from all the help above was change my ip addy from 10 and changed it to 3 at the end.

i want to say know how much i appreciate all the help from you all because i know it can be frustrating trying to help someone who sometimes gets flustered like me.

i owe you all a beer :-)


BM

[Giga]

so you have CCCAM running? all I have running is newcamd. Looks like there is an issue with the IP address?
When on IP 192.168.1.X subnet mask 255.255.255.0 not connection takes place?
While on IP 172.19.3.X subnet mask 255.255.0.0 newcamd connects?

should not happen, but it does?

Technomate 6000 HD Super users, can we have a report back from you and tell us what cam you have working and on what IP address?

Newcamd 172.19.3.5 subnet 255.255.0.0

[alboke]

hi modem chooses on dhcp enabled
ip 192.168.1.67
subnet 255.255.0.0
tried other ip addresses in range 192.168.1.64 to 192.168.1237
with dhcp disabled had no luck
using ccam seems like it only likes certain ip numbers ??

[B.M.]

so you have CCCAM running? all I have running is newcamd. Looks like there is an issue with the IP address?
When on IP 192.168.1.X subnet mask 255.255.255.0 not connection takes place?
While on IP 172.19.3.X subnet mask 255.255.0.0 newcamd connects?

should not happen, but it does?

Technomate 6000 HD Super users, can we have a report back from you and tell us what cam you have working and on what IP address?

Newcamd 172.19.3.5 subnet 255.255.0.0

well it does seem it was the ip addy issue mate because for some reason when i unplugged the box last night it was working great.

then this morning before i turned the box on my lad was on his xbox360 and our network is setup with ethernet homeplugs so it issues automatic ip address on th ehome plugs.

but my TM is plugged staright into the router so when i plugged the box on this morning all i had was scrambled channels.

i checked my lads ip addy on his xbox and it had allocated the same ip addy as the TM so as soon as i changed the ip addy of the TM bang everything cleared.

strange but thats all i can say that happened because i was doing the c line ok as i had it checked by a top fella :-)

ive experimented again tonight by turning both the xbox off and the TM off and it happened each time so there is deffo an ip addy issue with homeplugs i guess.

i just hope all this hair loss since i started this will help others with the same issues ive had and all you lads have been superb in your help which is very much appreciated.

[FENEKI]

TM-6900 Super



hi mate have CCCAM running .l am get the same here mate. l change it to 3 seconds .but it still doing the same .l have three lines connected
and wont is happening to me one is connected and two go off a then other 2mins again the three lines will connected again.and sometime the three of them will be all ok .for some mins and then it go again to me but my pc will have internet can anyone help me with this please all

i want to say know how much i appreciate all the help 2 Giga 2 all Thank

[Giga]

@B.M.
in the modem/router somewhere where the DHCP is defined you can change the range DHCP has to assign the IP adresses for hand out
move the start address up to X.X.X.4
this would mean the X.X.X.3 address would no be handed out.
in TM Main Menu: System Settings: IP Settings: take note of the IP details there
IP Address: X.X.X (1st 3 groups only)
Subnet Mask: X.X.X.X
Gateway: X.X.X.X
DNS: X.X.X.X

Change DHCP Usage to OFF
and fill in the same details from above just with this change:
IP Address: X.X.X.3

@alboke
somewhere in the router you can change the range where the home network operates in
the router access is now 192.168.1.1 change this in the router to 172.19.3.1
IP pool start 192.168.1.2 change this to 172.19.3.4
IP pool end 192.168.1.127 change this to 172.19.3.127
subnetmask 255.255.255.0 change this to 255.255.0.0
you can then setup TM as above

keep in mind if your using static IP elsewhere in the homenetwerk (computers, ...) to change this to
the login address changes to 172.19.3.1
more details would be in the router/modem manual or in the web interface help.
If you doubt anything ask these before, if you don't and mess up the router/modem settings you can loose the internet.
take note of all your provider settings (username, passwords, settings, ...) to have access to all services provided: like internet, phone, TV, ...
take screen shots, or if you know someone with good knowledge on these: ask her/him

[B.M.]

hello lads.

well after all the trouble getting the TM up and running i decided to sell it as i wasnt comfortable with it because im used to linux based box.

ive now got myself a DM 800 HD and got it up and running sweet and must say i feel really comfortable using it and as i said in an earlier post on this thread that i thought i made a mistake in buying theTM although i did like the menu layout on it.

so anyway thanks for everyones help once again :0)

BM

[pepe17]

Giga, pls help!
I did everything even patching again the tm 6900super, but no connection, when i press 8281 i get the menu and i put all the details but still on the status shows disconnected.
any help pls.

[Giga]

7.22p?
cccam or newcamd? try newcamd first on one of the test servers.
have you checked your modem/router firewall? is there a log with blocked events?
Input Rule
What is blocked to technomate?
if there is blocked traffic to technomate create a rule allowing TCP traffic to only TM
Output Rule
what is blocked from technomate?
If there is blocked traffic from technomate create a rule allowing TCP traffic from TM to any address
Don't decrease timeout in TM set this to 09 seconds
your ping to the server should be as low as possible, lower then < 9 ms. local < 2 ms
what is your current home network range?

[Blu-ray]

hello lads.

well well well

im up and running - dont ask me how but i am and the only thing i really did that was different from all the help above was change my ip addy from 10 and changed it to 3 at the end.

i want to say know how much i appreciate all the help from you all because i know it can be frustrating trying to help someone who sometimes gets flustered like me.

i owe you all a beer :-)


BM

still cant connect iam having another beer.