Fausto - AZbox HD+MultiCAS - Tutorial

[dvlajkovic]

Click HERE (https://www.satpimps.co.uk/showthread.php?t=131257) :sifone:

[iwols]

whats fausto plz

[EAYKOC]

whats fausto plz

Hi,

If I understood it correctly, it's an emulator server for some providers which works on Windows based computers.

User will need to feed this application with bis(?) keys and multicas will work as newcamd client and connect to this application.

Please correct me if I'm wrong.

Eren

[dvlajkovic]

Partially true... these short instructions were about using Fausto as a local server for opening Nova Cyprus bouquet (13E), Bulsatcom bouquet (39E) + Arena Sport 2, 3, 4 at 39E (11104V-SR15000-FEC2/3-DVB-S QPSK) and CanalDigitaal bouquet (19.2E). Additionally, it opens up WDS TV at 10E and EURO 1080 (HD 1) at 9E.
Decryption concerns channels in Irdeto 2 ONLY!

[SatSearcher]

Thanks for this tutorial, even a dummy like me can understand it! Got all packages working except for the soft encrypted viasat channels, can't seem to get these working?

[dvlajkovic]

Are you surely able to get a lock on these Viasat channels in West Yorkshire?
I can barely catch NRK 1 with 1.8m dish here in Balkans...
Anyway, it works 100% - I'm watching it right now.

[kinace]

the soft encrypt nordic channels on sirius open with gCam

[joe_b]

can't get this to work at all, tries the 3 servers and they fail..

what is the best tp and freq to try

followed the tut to the letter

any ideas guys

TIA

[SatSearcher]

Are you surely able to get a lock on these Viasat channels in West Yorkshire?
I can barely catch NRK 1 with 1.8m dish here in Balkans...
Anyway, it works 100% - I'm watching it right now.

Signal is very strong here in west yorkshire, between 50-80%, just can't get fausto to decode them! As i say, it works on C+NL, Bulsat, Nova, WDS & Euro 1080, just not viasat!

@joe b
Have you got a firewall running? I had same problem as you at first, found out zone alarm was blocking it.

[joe_b]

got nod32 running mate, will check it.

cheers

mrs watching tv at the mo, will check when she goes to bed lol

[joe_b]

still can't get this to work, but noticed that in fausto > server > manager my 192.168.xx.xx are not running.

firewall are all off...strange

any ideas guys

cheers

[zubus]

Have you opened the ports in your router ?

[dvlajkovic]

noticed that in fausto > server > manager my 192.168.xx.xx are not running.

Huh... it seems to me that you cannot connect your receiver to Fausto server because of NO SERVER running there at all :smash:
Redo your steps around starting of the Fausto server.

[snakie]

Great support dvlajkovic :) superb.
It seems fausto made the sat scene move again while was stacked in ready solutions ;)

[joe_b]

Huh... it seems to me that you cannot connect your receiver to Fausto server because of NO SERVER running there at all :smash:
Redo your steps around starting of the Fausto server.

the Fausto servers > 127 < are running ok

my >192.168< has stopped as soon as it has loaded.

ie it does not start, so what have i done wrong.

or is the setup wrong..

cheers

[joe_b]

Have you opened the ports in your router ?

I opened ports 17500 - 21000 hope this is ok.

thanks m8 :)

[joe_b]

anybody else have any ideas as to why this is not working.

cheers

[nickman9271]

I opened ports 17500 - 21000 hope this is ok.

thanks m8 :)
why should you forward ports to wan as long as you wish to work in local lan ? useless .

try at server config to change the ip of the listening server . 0.0.0.0 did the work for me instead of 127.0.0.1 . or at last use the ip of your pc ( not politically correct ) ...

use the command promt to see wheather the ports are opened and listening
use netstat -a command
hope it helps

[makkadam]

I installed the package two days ago, and it worked OK on CANALDIGITAAL channels.
But today it has stopped working. My STB keeps saying "encoded" when I switch to a such channel. Fausto log says "cannot decode".

Is Any body else here with same problems?

makka

[SatSearcher]

Yes, canal digitaal seems to be down.