CCCam installation - plugin starting error

[leoalex]

Hi mates,
I have an issue: After copying plugin files to var/bin and var/etc I switched off the receiver, but then-->

- I cannot switch on/off the plugin in menue-->RED
- internal reader is off (menue-->CAS-->1704)
- receiver restarted by remote swith off/on

What do I need to do now to get plugin running?
Please help asap

[leoalex]

hey guys, this is not a difficult question. Can somebody help out here? Thanks in advance

[Midnight R]

Its seems that most people on here including myself are using Xcam as the prefered client plugin.

That may be the reason why you have had no response.

Why don't you give Xcam a go?

[echelon]

I would suggest you use the kinkdink v1.4 loader to install cccam , xcam and any softcam you require , that way you know its been done properly and that you are using the correct files as well

you should then be able to use cccam by starting it in the control panel , although xcam seems to work better

[kinkdink]

Hi mates,
I have an issue: After copying plugin files to var/bin and var/etc I switched off the receiver, but then-->

- I cannot switch on/off the plugin in menue-->RED
- internal reader is off (menue-->CAS-->1704)
- receiver restarted by remote swith off/on

What do I need to do now to get plugin running?
Please help asap

PIN Code is 1407
NOT 1704

What version firmware are you running?
I recommend upgrading firmware to latest version.

Ice Installer V1.4 has been updated today with the new MCAS & XCAM files.

Download
https://www.satpimps.co.uk/showthread.php?p=713625#post71362 5

[leoalex]

thanks for this info. will try this. But during entering the IP address I am getting error. I cannot enter "." like 192.168.1.61
when I am entering without "." like 192168161 then I am getting error
socket error 11004

my questions:
1. how can I enter IP address in the correct way?
2. is there a rule I need to follow? what do I need to install first? CCcam 2.14? then incubusCamd 0.97-b`?
3. can I copy the files via FTP to the box from PC? or better to use the ICE Installer?

[hda5]

You should be able to enter the . key
I can enter the IP address 192.168.1.61 no problem.

What operating system are you using?

[leoalex]

win7 32bit
after entering . I am getting message "Invalid Key pressed:.

[kinkdink]

Are you using a standard QWERTY keyboard?

I don't have WIN7 so I sent the Ice Installer to a mate who has WIN7 64 Bit Home edition and he can enter the IP address including the "." key without any problem.

So I'm not sure what else I can advice you mate, sorry.

Can someone else using WIN7 32 bit test and report back please?

[aadham]

Are you using a standard QWERTY keyboard?

I don't have WIN7 so I sent the Ice Installer to a mate who has WIN7 64 Bit Home edition and he can enter the IP address including the "." key without any problem.

So I'm not sure what else I can advice you mate, sorry.

Can someone else using WIN7 32 bit test and report back please?

No problem here (Windows7 32-bit Ultimate) and working as it should. However, if leoalex can type the IP in a text editor (i.e. Notepad) then copy and paste it in the app, then the issue should be solved. Just an idea.

[denton]

thanks for this info. will try this. But during entering the IP address I am getting error. I cannot enter "." like 192.168.1.61
when I am entering without "." like 192168161 then I am getting error
socket error 11004

my questions:
1. how can I enter IP address in the correct way?
2. is there a rule I need to follow? what do I need to install first? CCcam 2.14? then incubusCamd 0.97-b`?
3. can I copy the files via FTP to the box from PC? or better to use the ICE Installer?

Just a thought - try entering all 12 diigts ie. for "1" enter "001". In your case 192.168.001.061.

Denton

[leoalex]

I am using ICE Installer V1.4 by KinkDink
tried thhis also on winXP32bit, got the same error

Invalid Key Pressed: .

maybe I am using the wrong installer?

[leoalex]

No problem here (Windows7 32-bit Ultimate) and working as it should. However, if leoalex can type the IP in a text editor (i.e. Notepad) then copy and paste it in the app, then the issue should be solved. Just an idea.

copy and paste doesn´t work at this application Installer. Tried it already

[echelon]

put the ip address of the box in the ip section , including the full stops

ie:- 192.168.0.10 if the box was on ip 10

put something in the password box too ( anything will do )

then try it

and yes the kinkdink v1.4 installer works fine in xp 32 bit and win7 32 bit

[leoalex]

the problem is that I cannot put .
but "," is working.
http://hische.net/images/icecrypt4000-error.PNG
maybe this is because of the system language german?

[ian51]

What's with the password "dreambox"?

[kinkdink]

Yes I see the problem now. I understand the keyboard layout is slightly different on German keyboards, I'll fix that in the next release.

[leoalex]

great, having found the issue is 50% success :-)
when do you expect to have the new release. Need to set up the Cccam asap
Thanks

[echelon]

the problem is that I cannot put .
but "," is working.
maybe this is because of the system language german?


this is the first time you mentioned using german instead of english

surely there is a . on the german keyboard somewhere ? ( those commas in your image wont work )

more details are here _http://support.microsoft.com/kb/258668

alternatively , can you not switch to english keyboard while you do the job as a workaround ?

or even copy and paste an ip address from here into notepad , and then just change the numbers leaving the dots alone ?

ie:- copy and paste this address and then change the numbers to match your box ip address

192.168.000.002 or 192.168.178.61 or 192.168.1.61

[leoalex]

already tried to copy and paste = doesn´t work
already tried to use english keyboard = doesn´t work
already tried to copy to notepad = doesn´t work

[echelon]

looking on google and wikipedia this is a known problem of using the german keyboard and affects windows and linux users alike. so its not an icecrypt problem but a known problem of the operating system , ie:- windows in your case ( so is a computer os problem and not an icecrypt problem )

perhaps you can ftp the files over to the relevant folders on the icecrypt , and chmod to 755 ?

not being able to use an ip address will severely limit your abilities with boxes like these

you may even find a method of entering the ascii code 46 for the full stop , instead of pressing the full stop , or maybe assign the full stop to a little used key ?

you cannot be the first person to have had this full stop problem on a german keyboard layout and you may find the answer on a german computer forum


update from here _http://www.zyra.org.uk/kcodes.htm

To get a key code to come up, here's what you do:

1. Hold down the left of spacebar ALT key.

2. While holding down the ALT key, type in the number of the code on the numeric keypad. This can be any number from 0 to 255. ( 46 or 046 = full stop )

3. Let go of the ALT key.


just tested this theory in kinkdink,s installer v1.4 and works for me

[kinkdink]

V1.5

Download
https://www.satpimps.co.uk/showthread.php?t=130709 (https://www.satpimps.co.uk/showthread.php?t=130709)

[leoalex]

Try the attached version and report back.
If this one doesn't work I have another method to try.

Kinddink: Thanks a lot, this version works for me
Great and thanks for you fast reply. I will go now for the second steps.
and try to configure cccam
:king-042:

[mgluby]

Unless you have changed the password the password for the icecrypt is blank when using the installer. Alternatively use the Dreambox tools to ftp the files over and to configure the xcam client. I use this and is an easy tool to use.

[kinkdink]

Kinddink: Thanks a lot, this version works for me
Great and thanks for you fast reply. I will go now for the second steps.
and try to configure cccam
:king-042:

My pleasure, I'm pleased to hear it now works :respect-048:

[denton]

already tried to copy and paste = doesn´t work
already tried to use english keyboard = doesn´t work
already tried to copy to notepad = doesn´t work


I can copy and paste my IP - just tried it.

[denton]

Hi mates,
I have an issue: After copying plugin files to var/bin and var/etc I switched off the receiver, but then-->

- I cannot switch on/off the plugin in menue-->RED
- internal reader is off (menue-->CAS-->1704)
- receiver restarted by remote swith off/on

What do I need to do now to get plugin running?
Please help asap

This problem is probably because you don't have the correct permissions on the "bin" file(s). They need to be 755. others can be 644.