JSC_Sports_On_Technomate

[Plessy]

Just wondering if JSC Sports on 13'E + Bulsat on 39'E is clearing for anyone using CILQUER ICI.exe +VPLUG ?

Tried yesterday + today but just getting Scrambled Channels.... is there something that I have missed i.e. updated software or are they down ?

Thanks.

Plessy.

[titus]

just tried jsc not working for me,

[Plessy]

just tried jsc not working for me,

Thanks Titus:respect-048:

I wont go fiddling with anything just yet as I am obviously not alone on this one......


Plessy

[Giga]

hope ^^COMPASS^^ updates this solution soon for you lot.

[holmroad]

hope ^^COMPASS^^ updates this solution soon for you lot.

Think Compass is on holiday mate!!:respect-067:

[Giga]

without his laptop and usb modem? that would be odd, him not passing by?

[holmroad]

without his laptop and usb modem? that would be odd, him not passing by?

Yes but we havent heard anything from him since he posted he was off for a while, so maybe he hasnt taken his lappie THIS time?:respect-applause-00

[scotty111111]

have you guys tried fausto 1.45 emulator for bulsat ? you can use diablo keybin updates and even put new key into emulator manually - as for jsc i have problems with way tm1500 reads caids - i can open some channels using an old patch dated 100807 for caids reading and an update i found for humax - if allowed i will post it

[CBo]

good thing this. JSC should mean something to watch for next season maybe! Excellent work compass updating this for us poor technomate owners :)

[Weston Calling]

I couldn't get them to open yesterday, but right now JSC sports channels are opening fine on my TM1000ci with just CILQUER in Bulsat_39E,JSC,Sct13°E,08-07-2010_by_Compass.

Weston Calling

[titus]

jsc now working for me, guess their was a problem yesterday

[Plessy]

JSC Sports open again !:respect-048:
Bulsat not opening though. (Time-out 7025ms)
Could this be my location i.e. distance from server or server traffic issue ???

Any ways not complaining at least I have got something to watch....

Thanks for the info folks !:respect-067:

Plessy.

[gibson]

This is possibly the only avenue open for football at this moment in time. Thankyou Compass for possibly a new season of football.:respect-applause-00

Best wishes from,

Gibson.

[Disco Man]

Both jsc and bulsat run fine at this current time.

Disco man

[grin2]

im getting jsc but not bulsat on tm6800hd. same message as plessey

[joany]

Are you all ready to get arrested by the card sharing FBI?

[Plessy]

im getting jsc but not bulsat on tm6800hd. same message as plessey
-----------------------------------------------------------------
NOTE POST #226 by Giga
download/upload speed is not the essence. Response timings is all, these are showing in the DOS box below 1000 ms should give nearly no freezes.

@mynameisEarl,
there are limits what C S server can handle (users, network connection to it, same channel requests, ...) sometimes it works, other times it won't.

---------------------------------------------------------------

So:I am Grateful for having JSC working even if Bulsat is flaky at the best of times...................:respect-058:
----------------------------------------------------------------




Are you all ready to get arrested by the card sharing FBI?
----------------------------------------------------------
lol:rolleyes: Do you renounce Satan and all his works ? lol....:bravo-009:

If my dodgy mobile internet worked in the first place I'd be happy ,,,, Hence I think "they'd have a Hard Time finding me or catching me for that matter..... lol p.s. gr8 post re C.S. on other thread... will add my twopence in a wee bit...

---------------------------------------------------------------

Hope Compass is fully refreshed after his well deserved Holiday......

Thanks to All..

Plessy

[caddy]

cant get bulsat to open am i doing some thing wrong help please

[gibson]

What a pity JSC isn't showing English Prem games. Would be fantastic if Compass is able to crack a provider before kick off this coming Saturday.:respect-055:

Best wishes from,

Gibson.

[Plessy]

What a pity JSC isn't showing English Prem games. Would be fantastic if Compass is able to crack a provider before kick off this coming Saturday.:respect-055:

Best wishes from,

Gibson.

Any Would you Like a Free Bag of Chips to got with that ?

:frown:

Tinkering with the old stuff these days are a bit Grim, but we never give up hope...

Do you Not think that what was achieved with the latest TM Phant0M patches were phenomenal ? and the H/W learning curve of live keys via RS-232 ?.

:respect-051:

[Plessy]

Who know's ? What may Follow.........

[captainglassback]

Giga has posted on here that Phanton 311 is not compatible with SSSP so stick with 308!

[gibson]

Could not agree with you more Plessy, fantastic achievement when we thought the Tech was dead and buried. Well done Compass and all that contributed!

Best wishes from,

Gibson.

[holmroad]

Compass is AMAZING - getting we 'not mega computer literate so-and-so's' into the realms of c/s etc!
Thanks Compass - OUR friend!:respect-067:

[caddy]

bulsat working on technomate just coy latest dvb plugin ,copy and paste it to plugin in and bulsat opening no proplems

[paudie]

thanks to compass from all irish football fans for making it possible to watch match to night it is sad to say we are forced to pay for another channel to watch as our own network that we are paying a licence for cant show it.
thanks again compass.

[Plessy]

thanks to compass from all irish football fans for making it possible to watch match to night it is sad to say we are forced to pay for another channel to watch as our own network that we are paying a licence for cant show it.
thanks again compass.

And the Worst Part is They Want to Scrap the Analogue Transmission of these Local Native Channels with in the next two years,,,i.e. subscribe to Mr You Know Who ! in order to View....:respect-048:

Won't be getting a Brass Shilling from me ! and thats for sure....

[Plessy]

Compass is AMAZING - getting we 'not mega computer literate so-and-so's' into the realms of c/s etc!
Thanks Compass - OUR friend!:respect-067:

Sláinte Compass of Green, But Recently changed to Orange....:respect-051:

:)

[paudie]

i really enjoyed the game without a glitch but its a pity we did not win.better luck the next time.
thanks again compass.

[mickr]

Can anybody tell me where I can find latest plugin for technomate 6800 (not super) to get bulsat working

with thanks
Mickr

[harrycoates6]

is this hamedonnet file any good for t/m 9100s .tried loading hamedonnet file via rs232 cable but no success

[Giga]

These run on PC in windows connected with null modem, your receiver has to support SSSP (https://www.satpimps.co.uk/showthread.php?p=731840) <= click here.
Don't know if this support is available for this receiver and on what images this would be?

[harrycoates6]

is file hamedonnet ok for t/m 9100s .i tried to load it using rs232 null cable as per instructions no success

[soussss]

does alj****ra sport HD is open with it on tech 6900 s ?
thanks;)

[caddy]

use ANY DVB PLUGIN FOR BULSAT THEN COPY AND PASTE IT IN YOUR PLUGIN FOLDER WILL WORK I AM WATCHING NOW.

[harrycoates6]

To Compass. Will the hamedonnet file work on t/m 9100s

[Giga]

@harrycoates6
this will depend on what is running on your TM-9100S?
1st?: on what firmware is the SSSP function available on TM-9100S?
2nd?: how do you start this function?

I think you might have to ask that question in the forum specific forum for 9100 series, running and operating this receiver is at an another level. TM-9100S owners might failed to notice your question, put your question here:
Forum 9100 series (https://www.satpimps.co.uk/forumdisplay.php?f=250) <= click here

[FOX]

Does anyone getting JSC? I am getting time out. Is it the curent state?

[Giga]

still opening

2010/08/21 9:06:49 3096 p03 proxy 127.0.0.1:6001 newcamd525 (fd=4)
2010/08/21 9:06:54 3220 c01 plain sssp-client 127.0.0.1 granted (tuner, au=0)

2010/08/21 9:07:31 3708 p02 server www-satna-biz.sytes.net:2010 caid: 0500
2010/08/21 9:07:31 3708 p02 provider #0: 042400
2010/08/21 9:07:31 3220 c01 tuner (0500&042400/20F5/2F:D2DE): open (282 ms)
by ^^compass^^jsc+1-jsc+10 &
2010/08/21 9:07:32 3220 c01 tuner (0500&042400/20F5/2F:D2DF): open (446 ms)
by ^^compass^^jsc+1-jsc+10 &
2010/08/21 9:07:43 3220 c01 tuner (0500&042400/20F5/2F:5EB5): open (469 ms)
by ^^compass^^jsc+1-jsc+10 &
2010/08/21 9:07:53 3220 c01 tuner (0500&042400/20F5/2F:5EB4): open (484 ms)
by ^^compass^^jsc+1-jsc+10 &
2010/08/21 9:08:03 3220 c01 tuner (0500&042400/20F5/2F:8EB1): open (560 ms)
by ^^compass^^jsc+1-jsc+10 &
2010/08/21 9:08:13 3220 c01 tuner (0500&042400/20F5/2F:8EB0): open (578 ms)
by ^^compass^^jsc+1-jsc+10 &

[Weston Calling]

I was having no luck at all opening JSC with my TM1000ci loaded with the latest Phantom Patch. I reverted back to an older patch (307p March 2010) and JSC Sports are now opening fine as in the post above by Giga.

Weston Calling

[Giga]

was that the patch 311p: known problem with sssp or was it the latest: 312p?

[Weston Calling]

was that the patch 311p: known problem with sssp or was it the latest: 312p?

It was 312p. I have the old hardware version of the TM1000ci which has the on/off problem with Phantom patches, so I don't know if this might be a factor.

Anyway, as I say 307p works fine.

Weston Calling

[FOX]

Does anyone getting JSC with the 17/08 version? Tks

[captainglassback]

No not me Fox. 1500CI and 312 and 17/08

[Giga]

guess we have to wait for ^^COMPASS^^ to return from bank holiday?

[holmroad]

guess we have to wait for ^^COMPASS^^ to return from bank holiday?

Yes mate, I guess our genius colleague Compass is finally catching up with his 'other' family life at long last instead of constantly looking after all of OUR needs!!:respect-055:

[soussss]

hi to every one
gutted could not open the j/sport to watch the spanish liga ?
it was fine on sat but yesterday no chance . did any one managed to watch barcelona or madrid game?
thanks a lots

[UK2cyp]

Here is a quick fix until compass returns

Open mpcs.server file with notepad
replace spaniya-10000 with satnaserver-1000

ok at the moment

[soussss]

:confused:hi
i could not open the file it not compatible to any of my programs?
thanks for your help any way

[Giga]

right click on that file select open, should get the choice to select other program: select notepad to edit. If that was the question?

[soussss]

hi
i have done that i have windows 7 still can't see notepad . it keep showing which program do i have to open it
thanks

[Giga]

use search: "Notepad" start program and open file from there! Not .txt but all files and browse to that file you have to change.

[bsnake]

Here is a quick fix until compass returns

Open mpcs.server file with notepad
replace spaniya-10000 with satnaserver-1000

ok at the moment

works fine good work thanks :respect-057:

[soussss]

hi
is aljaz/s open with ssssp?
thanks

[soussss]

hi
can we have the latest update that open jsc sport through the null modem cable ?
thanks

[Weston Calling]

No need for an update. It's working fine if you do as above.

I.e.
Open mpcs.server file with notepad
replace spaniya-10000 with satnaserver-1000

Weston Calling

[darkbrown]

JSC has stopped working for me. It appears the server is down. It keeps timing out. Does anyone else experience same problem?

[soussss]

hi
same here black screen and server timeout
has anyone got the new settings for it ?
hi compass is there a chance for a new sssp file to watch jsc sport ?
thanks alot

[liaqatali]

hi not working any more

[darkbrown]

I am using the latest compass file dated 10-09, but I am getting the following error messages from the DOS prompt

2010/09/10 13:21:57 2272 p02 connect(fd=4) failed: (errno=111)
2010/09/10 13:21:57 5360 c01 tuner (0500&042400/20F6/2F:4EBF): not open (1578
ms)
2010/09/10 13:22:07 2272 p02 connect(fd=4) failed: (errno=111)
2010/09/10 13:22:07 5360 c01 tuner (0500&042400/20F6/2F:1EA8): not open (1765
ms)
2010/09/10 13:22:15 2272 p02 proxy sat-server.no-ip.biz:5320 newcamd525 (fd=4)

2010/09/10 13:22:16 2272 p02 connect(fd=4) failed: (errno=111)
2010/09/10 13:22:18 2272 p02 connect(fd=4) failed: (errno=111)
2010/09/10 13:22:18 5360 c01 tuner (0500&042400/20F6/2F:1EA9): not open (3484
ms)
2010/09/10 13:22:26 2272 p02 connect(fd=4) failed: (errno=111)
2010/09/10 13:22:26 5360 c01 tuner (0500&042400/20F6/2F:91E2): not open (1485
ms)
2010/09/10 13:22:36 2272 p02 connect(fd=4) failed: (errno=111)
2010/09/10 13:22:36 5360 c01 tuner (0500&042400/20F6/2F:91E3): not open (1562
ms)

Any idea what I am doing wrong.

[^^COMPASS^^]

I am using the latest compass file dated 10-09, but I am getting the following error messages from the DOS prompt

2010/09/10 13:21:57 2272 p02 connect(fd=4) failed: (errno=111)
2010/09/10 13:21:57 5360 c01 tuner (0500&042400/20F6/2F:4EBF): not open (1578
ms)
2010/09/10 13:22:07 2272 p02 connect(fd=4) failed: (errno=111)
2010/09/10 13:22:07 5360 c01 tuner (0500&042400/20F6/2F:1EA8): not open (1765
ms)
2010/09/10 13:22:15 2272 p02 proxy sat-server.no-ip.biz:5320 newcamd525 (fd=4)

2010/09/10 13:22:16 2272 p02 connect(fd=4) failed: (errno=111)
2010/09/10 13:22:18 2272 p02 connect(fd=4) failed: (errno=111)
2010/09/10 13:22:18 5360 c01 tuner (0500&042400/20F6/2F:1EA9): not open (3484
ms)
2010/09/10 13:22:26 2272 p02 connect(fd=4) failed: (errno=111)
2010/09/10 13:22:26 5360 c01 tuner (0500&042400/20F6/2F:91E2): not open (1485
ms)
2010/09/10 13:22:36 2272 p02 connect(fd=4) failed: (errno=111)
2010/09/10 13:22:36 5360 c01 tuner (0500&042400/20F6/2F:91E3): not open (1562
ms)

Any idea what I am doing wrong.

server was down

New update Here :
Jsc, Cyfra, ITV partner, S*y italia & Viasat

Click Here to Download TM_Sssp_Updates (https://www.satpimps.co.uk/showthread.php?p=749105#post74910 5)

Enjoy

[liaqatali]

hi Jsc Cyfra+ ITV PartnerS*y itlia Viasat working great thank you very much for suports

[darkbrown]

Thanks COMPASS, Viasat and sky italia work fine. But JSC doesnt work, still times out. You're a star.

[soussss]

hi
can anyone post the frequencies of
viasat
itv partner
i can not get them to open with the latest tm sssp update
thanks:respect-046:

[liaqatali]

hi JSC Does not Working today

[arns]

how do you connect a null cable to an apple pc

[Giga]

do you have an rs232 port? these programs run on windows, if you run windows and don't have rs232 ports you could need a usb to rs232 converter. don't know if these would work with windows running virtual on apple laptop? find your self a 2nd hand p4 with xp running on it (refurbished, ex large business computers, oxfam, program fro students, ...)

[soussss]

hi
are there any tips to stop the glitchin on s*y s***t it on technomate 6900 super on the settings
thanks

[^^COMPASS^^]

hi
can anyone post the frequencies of
viasat
itv partner
i can not get them to open with the latest tm sssp update
thanks:respect-046:

that worried me for a second

until i checked

all fine here

viasat Baltic frequencies

itv partner full including educational channels

i can also add Digiturk 7E if required lol

compass...

[Giga]

In TM:
see if using filter in sssp helps (caid & provider id)
try loading empty softcam
remove ci-cam(s) from ci-slot
remove card from card reader

[holmroad]

As a matter of interest, which Sly Italia channels can we get please?:respect-055:

[^^COMPASS^^]

As a matter of interest, which Sly Italia channels can we get please?:respect-055:

Jim Apart from the movies every think else is open inc calcio channels :party:

[liaqatali]

hi today sssp iload it but JSC and ITV Partner not working for me i have a TM1500C+ and rest of all working fine thank you suport

[captainglassback]

Struggled today. Cleared nothing at all! JSc 13E has worked for me in the past. Today, (all day!!), tried the 3 packages at 13E and Digiturk. 1500CI, 312p, no cam in slot using Compass 12-9-10. I get as far as ....plain SSSP client 127 0 0 1 granted (tuner au=0) and after exactly 2 minutes it goes to tuner disconnected (SSSP). Anyone any ideas please?

[holmroad]

Nothing for me either on JSC Sports 1-10, many others fine incl Canal + Sport & Film!:respect-069:

[kirky1423]

hi just woundering if my tm9100s will work wit sssp

[^^COMPASS^^]

Jsc Sports on Hotbird is still working fine for me on my trusty old TM 1500

@ captainglassback

please read this post here:

https://www.satpimps.co.uk/showpost.php?p=748947&postcount=2

this applies to how to set the default ECM pid in your TM1500 when your using 3.12p firmware.

compass

[holmroad]

Jsc Sports on Hotbird is still working fine for me on my trusty old TM 1500

@ captainglassback

please read this post here:

https://www.satpimps.co.uk/showpost.php?p=748947&postcount=2

this applies to how to set the default ECM pid in your TM1500 when your using 3.12p firmware.

compass

Thanks mate, so why isnt it working for me on my TM6900HD Super using 730P patch etc?:iamwithstupid:

I have never had to 'consciously' edit the ECM PID (whatever THAT is!) in the past - so how/why would I do it now after all this time not doing please?

[captainglassback]

Many thanks Compass. I had read every post in full before posting. Didn't understand the 'default' bit but could see how to edit / save. As I can get nothing going on any of the 4 packages that I have tried I seem to be doing something stupid as it has worked so easily in the past. Is it worth me going back to an old patch to try for sly italia and digitruk or anything at all?

[^^COMPASS^^]

Many thanks Compass. I had read every post in full before posting. Didn't understand the 'default' bit but could see how to edit / save. As I can get nothing going on any of the 4 packages that I have tried I seem to be doing something stupid as it has worked so easily in the past. Is it worth me going back to an old patch to try for sly italia and digitruk or anything at all?

go to jsc sports press 9797

set the default ECM to caid 0603

exit and save, it's a bit long winded as you need to do this on each channel

quicker loading patch 308p

compass

[kirky1423]

can my tm 9100s work in sssp mode or not

[liaqatali]

CILQUER ICI stop working on all channel today any idea please

[kirky1423]

will this sssp worhk with 6900hd combo black

[Giga]

yes

[grin2]

CILQUER ICI stop working on all channel today any idea please

just got home and noticed sly italy and polsat gone on my tm6800hd as well.


edit. jsc, bulsat not working either

[grin2]

bulsat now on with key change. anyone still got sly italia working?

[bsnake]

just got home and noticed sly italy and polsat gone on my tm6800hd as well.


edit. jsc, bulsat not working either

notr working for me

[kirky1423]

could any one confirm that this works with tm9100s or is this only for certain tm boxe's


Plug your Pc to Your TM Receiver (It is compatible with USB To serial for Laptop's)

1.Unpack hamedonnet
2. start CILQUER ICI .exe
3. Depending on your STB you may need to enable SSSP in your receiver Menu

[liaqatali]

hi i need new TM sssp up date please thanks

[^^COMPASS^^]

hi i need new TM sssp up date please thanks

Just updated italia for now

Download Here (https://www.satpimps.co.uk/showthread.php?p=749850#post74985 0)

[liaqatali]

hi i download sssp its working ok thank you for suports

[caddy]

hi i cannot get sssp working again for 13east itila tm1000d was working before on bulsat sssp but i cant work out if i am to manaully enter caid 0919 in myself any help woud be helpful.

[captainglassback]

I had it, (sly it), going when Compass posted earlier today but not now. I did have to punch in 9797 on the remote for each sly it channel though. (TM1500).

[grin2]

not working on tm6800hd either. all hd were open as well earlier. nothing was watchable tho as every channel kept freezing , every few seconds. looks like united on bulsat tonight.

[Jack1235]

Indeed they freezes or crashes.
I had before some channels temporary working on my TM-6800-HD
Now at this moment it's only 1
I also see a line of timeout of a "tuner" ?



Jack

[liaqatali]

all gone even JSC sport saying time out timeout

[Plessy]

all gone even JSC sport saying time out timeout

https://www.satpimps.co.uk/showthread.php?t=132425&page=12

NOTE POST #229 by Giga also POST #81 from earlier post by Giga......

Be patient Wait an see.......;)

[amn]

Just updated italia for now

Download Here (https://www.satpimps.co.uk/showthread.php?p=749850#post74985 0)
Hi Compass, I see you also have Fausto. I currently have aAzbox prem working via wireless to fausto. Can any of this be used in fausto or do i have to get a TM. If so which model. ?

Kind Regards amn

[naszdom]

I have looked at the other threads but I am still not sure. What is ''timeout" is it my fault or the the server's fault. Either way thanks Compass for getting Technomates back on their feetagain.

[Giga]

Timeout: in short time needed between your receiver and the server for data to travel.
You have nearly no control over this. If you are on the border (700 ms) and you use Wifi in home network, using lan cable could just tip balance to acceptable. Test before laying cables.

[gentlmen]

Is server down on sky It I wonder?...

Using TM_SSSP-14-09-2010-_by_Compass file on TM6900 super with 7.29p can't get sky it cleared....and also with this file is it only sky it open or others open as well ie;


Digiturk 7E ok
Caid = 0D00
Ident = 000000

==============

updated
Jsc sports on hotbird ok
Caid = 0603
Ident = 000000
==============

13E Cyfra+ ok
Caid = 0100
Ident = 000068

==============

16E ITV partner ok
Caid = 0D06
Ident = 000000

==============

13E italia ok
Caid = 093B
Ident = 000000

==============

4.8E Viasat Baltic ok
Caid = 090F
Ident = 000000

I have the CILQUER ICI.exe times on attachment, can anyone confirm all ok or am doing something wrong on here......


Regards...
Gen...

[naszdom]

Re: Timeout
Thanks Giga I'll try lan on a home network.
If I'm using an old slightly slow laptop will that make the problem worse?

[Giga]

If you processor has some reserve: should be ok. Myself currently running Intel Pentium 4 530. By pressing simultaneous [Ctrl] [Alt] [Delete] should bring up windows task manager and show what processing power is remaining.

[Jack1235]

@ Giga

I know this is cs, but how are the risks ?
High or low for using sssp ?
Any people had already problems ?

Jack

[Giga]

Risk: yes: it is a connection and traceable. Less risky then using a pay server where they can follow connection, your login, e-mail(s) and made payment(s).
Use C S as little as possible. I would not advise using this to view movies, music all day, you could draw attention to you. Each internet traffic has a certain signature and could be recognizeable and if priority changes from downloading illegal content like mp3, movies to C S. You don't want someone knocking on your door with a bill for the used pay services.

[dodgybrook]

nowt workin here:o15:

[naszdom]

Re risk

Nothing you do on the internet is not traceable but what is the law?

In the UK if you provide anything that enables you to watch any encrypted TV signal emanating from the UK it is a criminal offence. See the copyright act. It is not illegal to use it. Nor is it illegal to provide anything that enables you to watch encrypted TV signals not emanating from the UK.

No doubt they will watch you. But if you are paranoiac don't go on the internet.

Other countries all have different laws.

[Jack1235]

Good that I've only tested it for 15 minutes,
instead of days :D

Good to know. Thanks for the info ;)

Jack

[Plessy]

[QUOTE=naszdom;750411]Re risk

Nothing you do on the internet is not traceable but what is the law?
----------------------------------------------------------------




Yes you I.P. as service Provider is VERY TRACEABLE,,

We All tend to think "It Will never happen to Me" ...........

Until it's too late........


Just a note of caution to all that "don't fully understand" Big Brother......

[FOX]

does anyone is getting anything on the sssp connection?

[FOX]

does anyone getting anything on sssp connection now?

[Giga]

on SBCL bulsat keys only: guess an update by ^^COMPASS^^ is required to open more?

[holmroad]

Just tried SSSP and NOTHING working for me - tried JSC Sports 1-10, Sly Italia and others, all with continuous timeouts or failures!:banghead:
Bulsat working via latest patch/softcam however on my TM6900HD Super (plus also still works with a G a m m a)!

[paudie]

getting nothing for days now i was over the moon when i got sly itali but all gone now.

[grin2]

hope bulsat still works for united v bindippers at dinner

[liaqatali]

hi sssp not working at moment nothing to watch at the time bean any help please

[soussss]

same here my blind scan works wonderfull .unfortunatley blackscreen for days.................:iagree:

[holmroad]

Hope all well with Compass & that he hasnt been caught up with by Rupie?:respect-055:

[^^COMPASS^^]

I'm fine thanks for asking ;)

I can only add free servers when there available,

But i must admit I'm a bit side tracked ATM
as one of my Unix box 500's has had the boot-loader erased it obviously had the wrong MAC code in it so it was seen as a clone.

compass

[liaqatali]

thank you compass infarm us

[holmroad]

God mate, thank goodness you are ok - especially after the Toons good win yesterday - thought you might have been out over-celebrating!! lol!!!
No, seriously it did cross my mind that something may have happened to you after all the 'doom & gloom' about ID's being searched out by the anti cs brigade of Rupie and the like!!
Hope you sort YOUR problem out really soon too - then we can maybe look forward to another update - all being well - please?:bowing-036:

[liaqatali]

hi compass thank for suport 2nd post is ok JSC ok

[holmroad]

hi compass thank for suport 2nd post is ok JSC ok

Which 2nd post mate?:respect-055:

[holmroad]

Sorry, it took some finding guys - and thanks again to Compass!
JSC now fine!!:respect-050:

[grin2]

mines done one at halftime. cant get it to work???

[fatadie]

Down.

[liaqatali]

yes its down

[grin2]

hope its up for s****horpe

[soussss]

is al jsc s++++t still on with the latest compass update?
thanks:chillpill:

[holmroad]

is al jsc s++++t still on with the latest compass update?
thanks:chillpill:

It was fine for ME last night, but havent had time to check today mate!:respect-055:

[pauls]

Down for me it says:- login failed for user '......'
pauls.

[bungouk]

Jsc+1 on Hotbird 100% ok
Jsc+2 on Hotbird 100% ok
Jsc+3 on Hotbird 100% ok
Jsc+4 on Hotbird 100% ok
Jsc+5 on Hotbird 100% ok
Jsc+6 on Hotbird 100% ok
Jsc+7 on Hotbird 100% ok
Jsc+8 on Hotbird 100% ok
Jsc+9 on Hotbird 100% ok
Jsc+10 on Hotbird 100% ok

With credit from compass original files i have updated.

[bungouk]

2nd update

Sky italia now working

[joany]

2nd update

Sky italia now working

The king is dead!


Long live the king!!

[pixey]

The king is dead!


Long live the king!!

In the past, the Technomate and Humax used very similar emu's. With this in mind, is there a way to open the Jsc channels on Hotbird and possibly sly Italy?

Any help appreciated.


pixey

[Giga]

as Compass dropped support for Technomate, probably the best way for SSSP is using Fausto?

[joany]

who is bungouk. Hasn't he done the sky italia file?

[liaqatali]

The file is working thank you boungouk for suport

[pixey]

as Compass dropped support for Technomate, probably the best way for SSSP is using Fausto?

Giga, is it possable to open JSC sports with Fausto, as it won't work for me?

pixey

[caddy]

dont work for me etheither on sky or jsc

[holmroad]

So these Bungouk files are actually working guys?
Just that as never heard of him its come as a LOT of a surprise - and you really cant be too careful on these occasions?:respect-050:

[captainglassback]

Had a good fiddle around. Nothing on either @ 11.15AM

[archiesat]

sly is ok jsc no @11:38








archie

[gibson]

Just tried the latest from bungouk with no luck although this maybe due to a 10 metre run from PC via null modem to Technomate.
BTW, it's good that we have another helper prepared to give his time in bungouk.:bravo-009:

Best wishes from,

Gibson.

[sat4321]

The Italian provider - picture is constantly breaking up as CILQUER ICI
is updating. JSC works a bit better, but is still breaking up.
Using Technomate 5400 and latest patch.

[Giga]

@Gibson,
lower baudrate in Technomate and in the properties of the used com port on computer to 57600, this should allow further distances
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/sssp/SSSPfilter001.jpg

[Giga]

The Italian provider - picture is constantly breaking up as CILQUER ICI
is updating. JSC works a bit better, but is still breaking up.
Using Technomate 5400 and latest patch.
lower programs running on the PC or using internet. Check timings in DOS box.

[gibson]

Hi Giga. I'm using my old Technomate 1500 taken out of wraps as my DM800, without CS, is practically a FTA box.
Not sure it's possible to change the baud rating on the old beast. If it is and you know how I'd be pleased to know.

Best wishes from,

Gibson. .

[Giga]

Not sure it's possible to change the baud rating on the old beast.
don't have that info, check menus otherwise try with lowering just baud rate on computer. Switch off computer and TM-1500 (not standby). Then start computer, Fausto and connect serial (in program) then start TM-1500 and switch channels

[pineapple jack]

I keep getting timeouts.

[bungouk]

Hi all

Just got in from work and checked jsc and sky it and they both working fine for me.
Some channels take longer to clear than others.

[mariop1]

nice to meet you ( bungouk )
and thanks for your work.

[grin2]

jsc a no go on tm6800hd. sly italia comes on but freezes every few seconds. nice to see bungouk giving it a go. hopefully the glitches will be sorted.

[caddy]

this is a load of balls it does not work unleess it works with elearier pacthes so it is not worth wasteing time on it does not work and i and many others have comfirmed this. caddy have been trying everthing and it is crap.

[bungouk]

Caddy calm down will you
It was working fine this morning and they are free servers so they can go down anytime.
You sound so ungrateful im trying to help us out and all u do is moan.
Dont like it then pay for subscriptions.

Regards
Bungouk

[Weston Calling]

Caddy calm down will you
It was working fine this morning and they are free servers so they can go down anytime.
You sound so ungrateful im trying to help us out and all u do is moan.
Dont like it then pay for subscriptions.

Regards
Bungouk

I think everyone on here is grateful for you efforts bugouk. Maybe frustration causes some people to forget to show this gratitude.

Weston Calling

[darkbrown]

Bungouk, thanks for this. I appreciate your help. jsc wasnt working this morning, but sky italia does. great work. keep it up

[holmroad]

Thanks for files mate - Sly Italia works, albeit very intermittently - got a few HD channels to work yipee - but absolutely zilch for JSC Sports 1-10!
Thanks again mate!:king-042:

[bungouk]

Cheers mate i dont have HD box so couldnt check them channels out i will look into JSC sport. after footy 2nite

[joany]

this is a load of balls it does not work unleess it works with elearier pacthes so it is not worth wasteing time on it does not work and i and many others have comfirmed this. caddy have been trying everthing and it is crap.

This is a really poor attitude from a junior member.

If you don't like it then foxtrot oscar. i'm sure there is another forum where a dark lord will be grateful to take your soul.

[sat4321]

This has been my first attempt at clearing channels using SSSP, thank you bungouk.
I will try and check timings in DOS box and see if I can improve the decoding, as
suggested by Giga.

Thank you all.

[bungouk]

3rd update

Jsc+1 on Hotbird 100% ok
Jsc+2 on Hotbird 100% ok
Jsc+3 on Hotbird 100% ok
Jsc+4 on Hotbird 100% ok
Jsc+5 on Hotbird 100% ok
Jsc+6 on Hotbird 100% ok
Jsc+7 on Hotbird 100% ok
Jsc+8 on Hotbird 100% ok
Jsc+9 on Hotbird 100% ok
Jsc+10 on Hotbird 100% ok

Sky italia ok but has glitches

[caddy]

i just want to apoligise to our freind i now he is trying hard it is i spent all day trying to get this going a bit annoying but i take my hat of to him and if he needs any help i will give him it thanks ,CADDY

[bungouk]

Just so people know i am using and testing on a TM5400 super+ with latest phantom patch.

Regards
Bungouk

[liaqatali]

JSC ok Sly italia no

[taffykid]

well done bungouk. i was thinking of posting updates , but as things are with some networks i was unsure to or not . it's easy to do if you know where to find free servers and it is still a great little program .

[gentlmen]

Thanks for files mate - Sly Italia works, albeit very intermittently - got a few HD channels to work yipee - but absolutely zilch for JSC Sports 1-10!
Thanks again mate!:king-042:

First of all thanks to BUNGOUK for his hard work...
Holmroad m8, can you confirm which HD channels you cleared? and can anyone confirm which Sky Italia channels are open, I have got JSC all OK and also SKY Cinema 1, SKY Show, Sky Sport 1 and Sky Sport 2 are open (channels keep freezing, server not very stable?), is this supposed to open all SKY Italia package? ....
Here is bit of my DOS repeort...

2010/09/30 1:41:53 3736 c01 tuner (0919&000000/2B5D/B7:3866): open (1457 ms)
by ++bungouk++sky italia
2010/09/30 1:42:03 3736 c01 tuner (0919&000000/2B5D/B7:68D4): open (1524 ms)
by ++bungouk++sky italia
2010/09/30 1:42:14 3736 c01 tuner (0919&000000/2B5D/B7:4826): cache2 (2518 ms
)
2010/09/30 1:42:27 3736 c01 tuner (0919&000000/2B5D/B7:A5E4): cache2 (5482 ms
)
2010/09/30 1:42:38 3736 c01 tuner (0919&000000/2B5D/B7:7DA7): timeout (7052 m
s)
2010/09/30 1:42:48 3736 c01 tuner (0919&000000/2B5D/B7:F3DD): timeout (7036 m
s)
2010/09/30 1:42:58 3736 c01 tuner (0919&000000/2B5D/B7:DA61): timeout (7051 m
s)
2010/09/30 1:43:06 3736 c01 tuner (0919&000000/2B5D/B7:894F): cache2 (4524 ms
)
2010/09/30 1:43:16 3736 c01 tuner (0919&000000/2AA8/B7:237D): cache2 (5289 ms
)
2010/09/30 1:43:26 3736 c01 tuner (0919&000000/2AA8/B7:A745): cache2 (4789 ms
)
2010/09/30 1:43:32 3736 c01 tuner (0919&000000/2AA8/B7:3348): open (640 ms)
by ++bungouk++sky italia
2010/09/30 1:43:44 3736 c01 tuner (0919&000000/2AA8/B7:5E30): cache2 (3260 ms
)
2010/09/30 1:43:52 3736 c01 tuner (0919&000000/2AA8/B7:8FF4): open (655 ms)
by ++bungouk++sky italia
2010/09/30 1:44:03 3736 c01 tuner (0919&000000/2AA8/B7:E589): open (1638 ms)
by ++bungouk++sky italia
2010/09/30 1:44:12 3736 c01 tuner (0919&000000/2AA8/B7:D71C): open (624 ms)
by ++bungouk++sky italia
2010/09/30 1:44:22 3736 c01 tuner (0919&000000/2AA8/B7:2D20): open (983 ms)
by ++bungouk++sky italia



Regards..

Gen...

[keith mawer]

hiya sorry if i sound thick!!!! i have a techo6800hd , is this some kind of patch or is it a key ,, sorry really just a bit confused especially the jsc bit. at the moment cant clear any,or sly of course

[taffykid]

Hi Keith i've the same box non super and this works great when servers are on . what you need is seiral cable rs232 from the tm to the pc ,make sure your box is set to sssp (menu/options). click on the cilquer.ici file thats in your folder, a dos window will open showing all the details and hopefull Bobs your uncle,i've just randomly picked he odd channel and jimmy,boomerang and discovery hd opened . Ive got the 710p patch on

[paudie]

just to add to taffykids note make sure its a null cable

[liaqatali]

last night sky italia not working and JSC OK AND THIS MORNING I FRESH RELOAD WINZIP SKY ok JSC OK STRANGE HAPPEN

[holmroad]

Sorry Bongouk but JSC Sports still not opening for me even with 3rd update file, but Sly Italia fine, opening many HD channels too, e.g cinema italia hd, cinemamania hd, max +hd, classics hd, calcio 8 hd, cinema max hd, cinema hits hd, cinema 1 hd, discovery hd, etc etc!:respect-055:

[keith mawer]

no good for me then my pc is upstairs and tellie downstairs!!

[Giga]

no good for me then my pc is upstairs and tellie downstairs!!
long rs232 connection posting 5: https://www.satpimps.co.uk/showthread.php?t=138214

[bungouk]

JSC was ok on mine at 6.30 this morning i did have to go to each channel and enter 9797 and made sure it was set to auto on my TM5400 hope this helps.
I will check again when i get in
Sorry for people having problems

Regards
Bungouk

[archiesat]

its app m8 thankyou for the update.




archie

[holmroad]

JSC was ok on mine at 6.30 this morning i did have to go to each channel and enter 9797 and made sure it was set to auto on my TM5400 hope this helps.
I will check again when i get in
Sorry for people having problems

Regards
Bungouk

Sorry to be a pain mate, but never had to enter 9797 previously with my TM6900HD Super!
Sly fine anyway, so bit miffed JSC Sports not working the same if file up to date mate?:confused:

[bungouk]

ok will look into it later once done some of my network+ uni course

[captainglassback]

JSC OK @ 17.15 on a 1500. However could not get any using 9797...AUTO! Has to be 9797 select option 1 being 042400 for me!

[sat_rrstm]

JSC OK here too,TM-6900 Super,but no SKY Italia.
Cheers @bungouk,thanks a lot for the files.

[holmroad]

JSC OK here too,TM-6900 Super,but no SKY Italia.
Cheers @bungouk,thanks a lot for the files.


Well isnt that weird mate, being exactly the OPPOSITE to what I'm getting on mine?:confused:

[gentlmen]

SKY Italia black as @ 07;58 but JSC Sports fine....

Regards...
Gen...

[holmroad]

Really weird eh, will try again later today!:respect-055:

[pineapple jack]

Is a short crossover lead better for connecting between the comp and the receiver ?


My lead is just less than 5 metres,would this cause the constant timeouts ?


Should I get a shorter one ?


Thanks.

[bungouk]

Im not sure but sometimes it's the servers there self that cause alot of time outs.
I will be looking into this when i get home from work

[taffykid]

i cant see it being to much of a problem ,as i'm running using home plug plus steam and emule running in ther back ground.i dont have a very fast broadband speed (i'm 1000ft on top of a mountain and miles from the exchange). i do get time outs but not as to cause a problem eg. all the open sly channels worked great with only the odd freeze mostly on the hd channels.

[Giga]

Is a short crossover lead better for connecting between the comp and the receiver ?
if you have communications with your null modem cable then it is ok
timeouts show in dos window of cilquer ici, timings > 700 ms
tested this to 7 meter on serial cable and 25 meter serial over cat5e
https://www.satpimps.co.uk/showthread.php?t=138214

[taffykid]

forgot.... as far as null cable goes mine is running into a usb to comport plug the only thing i have probs with is wsp and fausto(dunno why).

[PAULF]

Managed to get it working fine on my 6900HD combo non super after reading all the useful info on this thread.
I had to change the mpcs.conf file to S2 for COM3 which i use.
Have managed to open JSC sports but when trying to access Skyit the dos box for CILQUER.ICI just states
'not open'
at the end of each line.
I assume that means it is not available at present or do I have to do anything different for Skyit. ??
thanks again to all for thread info.

[tony52]

Hi Guys

Just got a laptop with windows 7.... Opening JSC fine on 13E just wondering what other channels are working on which sats seeing that it's the first time i'm trying this!

Thanks in advance

[bungouk]

i think sky it down at the moment well was this morning on mine

[Giga]

the only thing i have probs with is wsp and fausto(dunno why).
USB - Serial - Null modem cable, Fausto problem?
What problem? And what TM do you use?

[liaqatali]

JSC ok Sky italia down

[holmroad]

Hi Guys

Just got a laptop with windows 7.... Opening JSC fine on 13E just wondering what other channels are working on which sats seeing that it's the first time i'm trying this!

Thanks in advance

Hi Tony, can you try Sly Italia 13E on yours please to see if it works fior you mate?
I am setting up new lappie & will report back upon completion!:respect-055:

[tony52]

Sky italia down sorry mate

[holmroad]

Sky italia down sorry mate

Thanks for your trouble Tony!:respect-055:

[grin2]

JSC ok Sky italia down


confirm same on tm6800hd. jsc fine, sly down. using bungouk 3rd update

[naszdom]

Cyfra+ on the original posted by Compass seems to be working again

[holmroad]

Well I'm getting NONE of JSC Sports 1-10 OR Sly Italia - so sorry Bungouk mate - your 3rd file doing nothing for me!:confused:

[bsnake]

Well I'm getting NONE of JSC Sports 1-10 OR Sly Italia - so sorry Bungouk mate - your 3rd file doing nothing for me!:confused:

not working for me as well, blank since 5:30 pm.

[bungouk]

sorry guys i will look into it 2morrow for u

[bungouk]

JSC 1 -10 all ok
No sky it in this update sorry

[liaqatali]

JSC ok

[holmroad]

Sorry guys, but JSC Sports still not working for me, using 4th file!:confused:

(this at 1825hrs 5/10)

[grin2]

Sorry guys, but JSC Sports still not working for me, using 4th file!:confused:

(this at 1825hrs 5/10)

presume you have got a pc and a satellite box?

[bungouk]

Hi holmroad

Could you send a screenshot of CILQUER ICI when u run it and have your sat box on the jsc channels.
So i can see wat errors are happening
Regards
bungouk

[Giga]

right click on cilquer ici on task bar, select all
right click on cilquer ici on task bar, copy
open notepad: paste and save the text file and upload that file when you post message with Manage Attachments in advanced

[holmroad]

presume you have got a pc and a satellite box?

Thought your name was 'grin' - & not 'sarcy'? lol!!!:respect-055:

[sat_rrstm]

Sorry guys, but JSC Sports still not working for me, using 4th file!:confused:

(this at 1825hrs 5/10)

I can't find the file,what's the link,please?

[Giga]

I can't find the file,what's the link,please?
https://www.satpimps.co.uk/showpost.php?p=755207&postcount=453

[sat_rrstm]

https://www.satpimps.co.uk/showpost.php?p=755207&postcount=453 (https://www.satpimps.co.uk/showpost.php?p=755207&postcount=453)

Thanks,but the strange thing is that @holmroad is talking about a fourth file posted 05/10 :


Sorry guys, but JSC Sports still not working for me, using 4th file!
(this at 1825hrs 5/10)

and I found a newer file than yours here :

http://satpimps.co.uk/showthread.php?p=753727#post75372 7
posted 2 hours later than yours...
besides I couldn't spot manually the location of your link's post...
--------------------------------------------------------
@bungouk mate,could you please upload files after the latest post on this thread and not in the middle or elsewhere in it?
Thanks for the support,once again. :respect-055:

[holmroad]

I'm using a new laptop on Windows 7 and had to install my USB to stb from scratch!
The other day when Sly Italia was working but not JSC Sports, I had successfully changed portcom from COM 3 to COM 1 as previously - and Sly was working without 'portcom error' showing!
When I reported JSC Sports not opening yesterday the portcom was ok but it was telling me that 'JSC Sports not open' on DOS screen and was therefore constantly timing out.
Today when I tried again, the COM port had reverted to COM 3, as for some reason my lappie had decided to re-install the USB adaptor driver etc!
So I changed it to COM 1 as before - but device manager said COM 1 WAS 'already in use, do I want to continue as it may cause complications etc' - so I said YES!
Despite all this I'm now getting constantly in DOS screen 'Portcom error' so no point in screen printing as thats where I now am!
Help please!:confused:

[holmroad]

Rebooted and yipee there they all were - opening fine!
However within 3 or 4 minutes they've gone down again (messages in DOS screen stating '5928 c01 tuner xxxxxxxxxxxxxxx rejected tuner etc' so now again none of JSC Sports 1-10 opening any longer!:respect-051:

[holmroad]

This is what I'm now getting guys!

2010/10/06 11:37:19 3284 s monitor: disabled
2010/10/06 11:37:19 3284 s camd 3.3x: disabled
2010/10/06 11:37:19 3284 s camd 3.5x: disabled
2010/10/06 11:37:19 3284 s cs378x: disabled
2010/10/06 11:37:19 3284 s newcamd: disabled
2010/10/06 11:37:19 3284 s radegast: disabled
2010/10/06 11:37:20 3284 s logger started (pid=5856)
2010/10/06 11:37:20 3284 s resolver started (pid=4540, delay=30 sec)
2010/10/06 11:37:20 3284 s anti cascading: disabled
2010/10/06 11:37:20 3284 s serial: initialized (pid=5044, auto@/dev/ttyS0)
2010/10/06 11:37:22 5044 c01 plain sssp-client 127.0.0.1 granted (tuner, au=0)


Cheers!:respect-055:

[holmroad]

Rebooted again and now this:-

2010/10/06 11:51:51 4664 s 2593 service-id's loaded
2010/10/06 11:51:51 4664 s 36 lengths for caid guessing loaded
2010/10/06 11:51:51 4664 s monitor: disabled
2010/10/06 11:51:51 4664 s camd 3.3x: disabled
2010/10/06 11:51:51 4664 s camd 3.5x: disabled
2010/10/06 11:51:51 4664 s cs378x: disabled
2010/10/06 11:51:51 4664 s newcamd: disabled
2010/10/06 11:51:51 4664 s radegast: disabled
2010/10/06 11:51:51 4664 s logger started (pid=1680)
2010/10/06 11:51:52 4664 s resolver started (pid=504, delay=30 sec)
2010/10/06 11:51:53 4664 s proxy started (pid=1896, server=www.satna.biz)
2010/10/06 11:51:53 4664 s anti cascading: disabled
2010/10/06 11:51:53 4664 s serial: initialized (pid=860, auto@/dev/ttyS0)
2010/10/06 11:51:54 860 c01 plain sssp-client 127.0.0.1 granted (tuner, au=0)

2010/10/06 11:52:28 860 c01 tuner (0603&000000/20F6/34:A393): rejected reader
ident (0 ms)
2010/10/06 11:52:31 1896 p02 connect(fd=4) failed: (errno=1)
2010/10/06 11:52:31 1896 p02 connect(fd=4) failed: (errno=1)
2010/10/06 11:52:31 860 c01 tuner (0500&042400/20F6/2F:7FE0): not open (5273
ms)
2010/10/06 11:52:31 860 c01 tuner (0603&000000/20F6/34:62AC): rejected reader
ident (0 ms)
2010/10/06 11:52:31 860 c01 tuner (0500&042400/20F6/2F:7FE1): not open (2153
ms)
2010/10/06 11:52:33 860 c01 tuner (0603&000000/20F6/34:62AC): rejected reader
ident (0 ms)
2010/10/06 11:52:35 860 c01 tuner (0603&000000/20F6/34:62AC): rejected reader
ident (0 ms)
2010/10/06 11:52:37 860 c01 tuner (0603&000000/20F6/34:62AC): rejected reader
ident (0 ms)
2010/10/06 11:52:39 1896 p02 connect(fd=4) failed: (errno=1)
2010/10/06 11:52:39 860 c01 tuner (0500&042400/20F6/2F:E185): not open (78 m
s)
2010/10/06 11:52:41 860 c01 tuner (0603&000000/20F6/34:3186): rejected reader
ident (0 ms)
2010/10/06 11:52:43 860 c01 tuner (0603&000000/20F6/34:3186): rejected reader
ident (0 ms)
2010/10/06 11:52:45 860 c01 tuner (0603&000000/20F6/34:3186): rejected reader
ident (0 ms)
2010/10/06 11:52:47 860 c01 tuner (0603&000000/20F6/34:3186): rejected reader
ident (0 ms)
2010/10/06 11:52:49 1896 p02 connect(fd=4) failed: (errno=1)
2010/10/06 11:52:49 860 c01 tuner (0500&042400/20F6/2F:E184): not open (78 m
s)
2010/10/06 11:52:51 860 c01 tuner (0603&000000/20F6/34:10F4): rejected reader
ident (0 ms)
2010/10/06 11:52:53 860 c01 tuner (0603&000000/20F6/34:10F4): rejected reader
ident (0 ms)
2010/10/06 11:52:55 860 c01 tuner (0603&000000/20F6/34:10F4): rejected reader
ident (0 ms)
2010/10/06 11:52:57 860 c01 tuner (0603&000000/20F6/34:10F4): rejected reader
ident (0 ms)

[bungouk]

i get that rejected reader sometimes thats when on my tm5400 ihave to enter 9797 on each jsc channel and set the ident to auto then the channel comes on after a few seconds.
Its coz the server wants to use caid 0500 ident 042400.
Regards
Bungouk

[holmroad]

Thanks mate, but even with 9797 I still only get all this:-

2010/10/06 12:38:04 3236 s 36 lengths for caid guessing loaded
2010/10/06 12:38:04 3236 s monitor: disabled
2010/10/06 12:38:04 3236 s camd 3.3x: disabled
2010/10/06 12:38:04 3236 s camd 3.5x: disabled
2010/10/06 12:38:04 3236 s cs378x: disabled
2010/10/06 12:38:04 3236 s newcamd: disabled
2010/10/06 12:38:04 3236 s radegast: disabled
2010/10/06 12:38:04 3236 s logger started (pid=4240)
2010/10/06 12:38:04 3236 s resolver started (pid=5164, delay=30 sec)
2010/10/06 12:38:04 3236 s anti cascading: disabled
2010/10/06 12:38:04 3236 s serial: initialized (pid=3164, auto@/dev/ttyS0)
2010/10/06 12:38:12 3164 c01 plain sssp-client 127.0.0.1 granted (tuner, au=0)

2010/10/06 12:39:08 3164 c01 tuner (0603&000000/20F6/34:ACE2): rejected reader
ident (0 ms)
2010/10/06 12:39:11 3164 c01 tuner (0603&000000/20F6/34:ACE2): rejected reader
ident (0 ms)
2010/10/06 12:39:13 3164 c01 tuner (0603&000000/20F6/34:ACE2): rejected reader
ident (0 ms)
2010/10/06 12:39:15 3164 c01 tuner (0603&000000/20F6/34:ACE2): rejected reader
ident (0 ms)
2010/10/06 12:39:15 3164 c01 tuner (0500&042400/20F6/2F:8313): timeout (7040 m
s)
2010/10/06 12:39:16 3164 c01 tuner (0500&042400/20F6/2F:8313): timeout (7018 m
s)
2010/10/06 12:39:17 3164 c01 tuner (0603&000000/20F6/34:BA43): rejected reader
ident (0 ms)
2010/10/06 12:39:19 3164 c01 tuner (0603&000000/20F6/34:BA43): rejected reader
ident (0 ms)
2010/10/06 12:39:21 3164 c01 tuner (0603&000000/20F6/34:BA43): rejected reader
ident (0 ms)
2010/10/06 12:39:22 3164 c01 tuner (0603&000000/20F5/34:19F4): rejected reader
ident (0 ms)
2010/10/06 12:39:22 3164 c01 tuner (0500&042400/20F6/2F:69D7): timeout (7034 m
s)
2010/10/06 12:39:22 5140 p02 connect(fd=4) failed: (errno=1)
2010/10/06 12:39:22 5140 p02 connect(fd=4) failed: (errno=1)
2010/10/06 12:39:22 3164 c01 tuner (0500&042400/20F5/2F:6996): not open (747
ms)
2010/10/06 12:39:24 3164 c01 tuner (0603&000000/20F5/34:19F4): rejected reader
ident (0 ms)
2010/10/06 12:39:26 3164 c01 tuner (0603&000000/20F5/34:19F4): rejected reader
ident (0 ms)
2010/10/06 12:39:27 5140 p02 connect(fd=4) failed: (errno=1)
2010/10/06 12:39:27 3164 c01 tuner (0500&042400/20F5/2F:6997): not open (51 m
s)
2010/10/06 12:39:30 3164 c01 tuner (0603&000000/20F5/34:D17C): rejected reader
ident (1 ms)
2010/10/06 12:39:32 3164 c01 tuner (0603&000000/20F5/34:D17C): rejected reader
ident (0 ms)
2010/10/06 12:39:34 3164 c01 tuner (0603&000000/20F5/34:D17C): rejected reader
ident (0 ms)
2010/10/06 12:39:36 3164 c01 tuner (0603&000000/20F5/34:D17C): rejected reader
ident (0 ms)
2010/10/06 12:39:37 5140 p02 connect(fd=4) failed: (errno=1)
2010/10/06 12:39:37 3164 c01 tuner (0500&042400/20F5/2F:2F4D): not open (31 m
s)
2010/10/06 12:39:40 3164 c01 tuner (0603&000000/20F5/34:6D91): rejected reader
ident (0 ms)
2010/10/06 12:39:42 3164 c01 tuner (0603&000000/20F5/34:6D91): rejected reader
ident (0 ms)
2010/10/06 12:39:44 3164 c01 tuner (0603&000000/20F5/34:6D91): rejected reader
ident (0 ms)
2010/10/06 12:39:46 3164 c01 tuner (0603&000000/20F5/34:6D91): rejected reader
ident (0 ms)
2010/10/06 12:39:48 5140 p02 connect(fd=4) failed: (errno=1)
2010/10/06 12:39:49 3164 c01 tuner (0500&042400/20F5/2F:2F4C): not open (2073
ms)
2010/10/06 12:39:50 3164 c01 tuner (0603&000000/20F5/34:EC2C): rejected reader
ident (0 ms)
2010/10/06 12:39:52 3164 c01 tuner (0603&000000/20F5/34:EC2C): rejected reader
ident (0 ms)
2010/10/06 12:39:54 3164 c01 tuner (0603&000000/20F5/34:EC2C): rejected reader
ident (0 ms)
2010/10/06 12:39:56 3164 c01 tuner (0603&000000/20F5/34:EC2C): rejected reader
ident (0 ms)
2010/10/06 12:39:57 5140 p02 connect(fd=4) failed: (errno=1)
2010/10/06 12:39:57 3164 c01 tuner (0500&042400/20F5/2F:64E8): not open (41 m
s)
2010/10/06 12:40:00 3164 c01 tuner (0603&000000/20F5/34:3B0A): rejected reader
ident (0 ms)
2010/10/06 12:40:02 3164 c01 tuner (0603&000000/20F5/34:3B0A): rejected reader
ident (0 ms)
2010/10/06 12:40:04 3164 c01 tuner (0603&000000/20F5/34:3B0A): rejected reader
ident (0 ms)
:respect-050:

[bungouk]

I will try mine when i get in from work.
Can other people tell me if jsc open for them as i cant check at the min.

[pauls]

jsc not working for me, tried the 9797 (auto) thing but after it has saved if i try 9797 again it has gone back to one of the other options,
tried doing 9797 (auto) and saved 6 times in a row but it still goes back to another option.
pauls.

[pricey]

I can't get any JSC to open. The most frequent message I get is 'STOP POLL'. I have tried entering 9797 by the remote (I assume that is what is meant!)but there is no difference. Any chance for Fridays games??

[taffykid]

along with Cilquer ici have any of you tried the programs that Powercisco posts in the Humax section, they do almost the same thing and he updates often. i've found that most of his updates work on my tm 6800hd non super when servers are up . might be worth a look.

[liaqatali]

hi JSC not working today

[grin2]

ditto

[bungouk]

i have been trying to get it to work again but struggling to find a server that works at the mo.
Will post new file as soon as i get one to work.
Sorry people

[Learning]

@ bungouk
As and when you can m8. Those that want it quicker should maybe have a go at it themselves. And if people were to read the log as they loaded cliquer they would see why they arent connecting.
Thanks for your efforts m8.

[grin2]

read the log? dont you know how many oldies on here mate (me included). the only log i know was in my kecks when a police dog chased me at the match. might as well be in arabic

[holmroad]

read the log? dont you know how many oldies on here mate (me included). the only log i know was in my kecks when a police dog chased me at the match. might as well be in arabic

Well put my sarcy friend - I totally agree with you mate!!:respect-055:

[FOX]

I have been lost on this lenghty threads. Does anyone get JSC? if yes which version?
Tks

[grin2]

all down at mo. as far as im aware. whe the same thread is used for weeks, it is sometimes easy to get lost.

[holmroad]

Problem is that our trusty comrade Compass started this thread with his 'revolutionary' file to enable us to open exciting new channels on the TM's - and the same thread has been used ever since, with many many updates, all thanks to both Compass in the past and now our new hero Bungouk!!:respect-055:

[liaqatali]

hi wheare is bungouk gone he hase no post anew file

[bungouk]

I am still trying to get JSC open again thanks

[bungouk]

I have an updated JSC however it keeps freezing but thought i would post anyways incase it works for others and not me.
Also i have to keep going on each JSC channel changing setting (9797)to auto as it always picks the wrong caid and ident. on a TM5400.

Sorry all if this not working that well i am trying to sort it

[holmroad]

I have an updated JSC however it keeps freezing but thought i would post anyways incase it works for others and not me.
Also i have to keep going on each JSC channel changing setting (9797)to auto as it always picks the wrong caid and ident. on a TM5400.

Sorry all if this not working that well i am trying to sort it

Thanks mate, I'll try it later and report back asap!:respect-050:

[liaqatali]

sorrey the file is not working bunguk

[FENEKI]

I think everyone on here is grateful for you efforts bungouk its nice to help people

Thanks for your efforts m8

:respect-051: bungouk

Regards FENEKI

[holmroad]

No mate, sorry 'not open' for me either, sorry so late coming back to you!
Thanks again for trying!:respect-050:

[tony52]

sorry 'not open' for me either

[bungouk]

JSC sports 1 to 10 all ok.
I have attached a screenshot of CILQUER ICI of it working.
Regards
Bungouk

[liaqatali]

hi load fresh file and see your screenshot but not working for me thank for your help

[liaqatali]

hi i 2nd post i set windowfire wall its open now thank you your post and help

[bungouk]

How is JSC sports working for people

[bsnake]

How is JSC sports working for people

working fine here (just jsc sport 9 not working)

[holmroad]

Worked here thanks mate - but for only 20mins before it went off at 1935hrs BST with 'timeouts' & 'not open' in DOS box!
There were a lot of freeze ups too when it was on!
Thanks again for trying Bungouk!:respect-055:

[bsnake]

still working 1 to 10 now.

[holmroad]

It really is weird how files work for different people at different times?
Yesterday when it gave me 20mins then went off, despite several reboots, reloads, etc etc, I had to assume it must have gone off for everyone, but apparently not!
Strange eh?:confused:

[bsnake]

stopped working for me about 10 pm last nite

[liaqatali]

stop working this morning

[holmroad]

stopped working for me about 10 pm last nite

Same here mate!:respect-055:

[pricey]

Anybody got JSCto work today?