JSC_Sports_On_Technomate

[^^COMPASS^^]

(JSC SportsOn_ 7°W_13°E_26°E
using SSSP & Null Modem cable connected to receiver




With this tool your TM Receiver must always be plugged to your computer via your 9 Pin Null Modem Cable


Here how it works



Plug your Pc to Your TM Receiver (It is compatible with USB To serial for Laptop's)

1.Unpack hamedonnet
2. start CILQUER ICI .exe
3. Depending on your STB you may need to enable SSSP in your receiver Menu


I have Tested The following using this tool with my Technomate 1500 CI Super

Jsc+1 on Hotbird 100% ok
Jsc+2 on Hotbird 100% ok
Jsc+3 on Hotbird 100% ok
Jsc+4 on Hotbird 100% ok
Jsc+5 on Hotbird 100% ok
Jsc+6 on Hotbird 100% ok
Jsc+7 on Hotbird 100% ok
Jsc+8 on Hotbird 100% ok
Jsc+9 on Hotbird 100% ok
Jsc+10 on Hotbird 100% ok

Looks Like Via 4.0 Emulator

[speedy_04]

take it this works only with internet connection then???

[arns]

It was working on my tm1000 d yesterday ,but not today:mad

[speedy_04]

dont work offline

[arns]

Well on line just now, and still not working

[satp]

how did u get it to work on the tm1000d arns and is it working now

[pmb]

Is this still working please? Been trying it on 6800HD standard for the Leeds game this afternoon but it comes up with timeout using the desktop. Couldn't connect at all with laptop and usb/serial adapter.

[^^COMPASS^^]

No not working anymore :ack2:

[^^COMPASS^^]

Jsc+1 on Hotbird 100% ok
Jsc+2 on Hotbird 100% ok
Jsc+3 on Hotbird 100% ok
Jsc+4 on Hotbird 100% ok
Jsc+5 on Hotbird 100% ok
Jsc+6 on Hotbird 100% ok
Jsc+7 on Hotbird 100% ok
Jsc+8 on Hotbird 100% ok

Via 3.0 Emulator

15-05-2010 update

I have updated the server details changed provider id etc

regards compass

[^^COMPASS^^]

Jsc+1 on Hotbird 100% ok
Jsc+2 on Hotbird 100% ok
Jsc+3 on Hotbird 100% ok
Jsc+4 on Hotbird 100% ok
Jsc+5 on Hotbird 100% ok
Jsc+6 on Hotbird 100% ok
Jsc+7 on Hotbird 100% ok
Jsc+8 on Hotbird 100% ok
Jsc+9 on Hotbird 100% ok
Jsc+10 on Hotbird 100% ok

Via 4.0 Emulator server

17-05-2010 update

I have updated the server details changed provider id etc

regards compass

[^^COMPASS^^]

Down @ 10:49

[^^COMPASS^^]

Back on again :respect-050:

[speedy_04]

think i will just stick to using ma skystar2 to watch jsc just now

[pmb]

Thanks Compass. Got this going on my 6800HD standard but only when I use the desktop com port and not the laptop USB to Com adapter (Portcom error no matter which USB port I use). The Bulsat prog recognizes the adapter but not got it going yet.
Speedy_04 I didn't realize it was on the SS2 so that's something else to try later.

[dodgybrook]

yeah cant get it goin here on laptop using com 4 or 3 any way we can change it compass ta

[dodgybrook]

ok just changed com port 3 too 1 in hardware settigs seems to be doin somethin but not clearing

[dodgybrook]

5 6 7 8 9 10 ok clearing 1 2 3 4 not marvelous tho

[^^COMPASS^^]

Jsc+1 on Hotbird 100% ok
Jsc+2 on Hotbird 100% ok
Jsc+3 on Hotbird 100% ok
Jsc+4 on Hotbird 100% ok
Jsc+5 on Hotbird 100% ok
Jsc+6 on Hotbird 100% ok
Jsc+7 on Hotbird 100% ok
Jsc+8 on Hotbird 100% ok
Jsc+9 on Hotbird 100% ok
Jsc+10 on Hotbird 100% ok

all cleared, takes about 4 second to change channels

[pmb]

As dodgybrook says had to change the laptop com port from 3,4 or 5 (3 USB ports) to com 1 under device manager.(W7 machine) Agree on the 4 seconds.

[dodgybrook]

all ok now magnifico:respect-040:

[Barney]

simply Superb @ Compass :respect-054:
works 100% on Jsc sports all of them in hotbird 13e .
tested and working perfectly ,
many thnxs for your efforts amazing job indeed ,
thank you .
-----------
Barneycarlton

[^^COMPASS^^]

simply Superb @ Compass :respect-054:
works 100% on Jsc sports all of them in hotbird 13e .
tested and working perfectly ,
many thnxs for your efforts amazing job indeed ,
thank you .
-----------
Barneycarlton

More here as well Canal Digital on thor

https://www.satpimps.co.uk/showthread.php?t=133840

[ceyer]

Brilliant all of C+ Sweden opens- I guess we should keep this shhhhhh.

[holmroad]

Will try this later - thanks to Compass - not really very 'up' on all this though, assume by SSSP we mean '8281'?:respect-055:

[munir]

Brilliant all of C+ Sweden opens- I guess we should keep this shhhhhh.

yes thanks guys...but what you mean c+sweden?i thought c+sweden was on iw...

[pmb]

yes thanks guys...but what you mean c+sweden?i thought c+sweden was on iw...

Yes , see post 22. In CON**:respect-067: Can take several seconds to clear.

Holmroad - not sure about your super but with my standard 6800HD I select SSSP from installation option serial mode.

[ceyer]

C+ Nordic is marketed in S,DK,N,FI

You´ll get all the chls that they offer in Sweden
(so no NRK,TV2 Norge........)

see also here:
hxxp://www.canaldigital.se/Utbud/Parabol/Familjepaketet-med-Canal-Plus-Total/

[holmroad]

Downloaded Compass file, unpacked it, but message saying could not unpack some of it and got no further!
My adaptor for null modem cable etc has allocated COM port 6 of my lappie as the desired one, so how do I specify this too please?
Maybe Compass could PM me if possible please?:confused:

[pmb]

Downloaded Compass file, unpacked it, but message saying could not unpack some of it and got no further!
My adaptor for null modem cable etc has allocated COM port 6 of my lappie as the desired one, so how do I specify this too please?
Maybe Compass could PM me if possible please?:confused:

Have a look at posts 16 & 19 for the com port issue. Sounds like a corrupted download so worth trying again.

[holmroad]

Have a look at posts 16 & 19 for the com port issue. Sounds like a corrupted download so worth trying again.

Tried that mate but still cant get it going, so must simply be a case of me being a good old fashioned thicko!:respect-067:

[holmroad]

Tried setting up COM port 1 in Device Manager first - it WAS set to COM port 6 as I said earlier - double clicked on CILQUER.ICI exe, got black pinging panel, set to JCS Sports 1 - entered 8281 - but nothing happened!:confused:

[Giga]

Will try this later - thanks to Compass - not really very 'up' on all this though, assume by SSSP we mean '8281'?:respect-055:
NO: 8281 = C S
Simple Serial Sharing Protocol sits under Instalation : Option: Serial Mode:

[Giga]

read my previous post: have to enable SSSP

[dxman]

can anyone tell me what is the correct baud rate to use ,as i get a lot of freezing on the c+ nordic
i use 9.600 also tested 19.200 it look if it is low work better , or nothing working at all if higher

[Giga]

under XP on a 6900 HD Super: COM1
Baud rate: 115200 or 128000
databit: 8
parity: none
stopbit: 1
datatransfer: none (hardware, xon/xoff, none)

[dxman]

thanks Giga
I was talking under the TM Menu SSSP,sorry my fault i should explain that better
the only two i can get to work are this Baud rates 19.200 and 9.600 higher or lover either don't work or freeze,but i bear in mind the comport settings on the Lappy
I was wondering if there is a solution for stopping the freezing on 1 west , got an idea 13 was ok ,but i haven't test it longer

[^^COMPASS^^]

They run through a proxy, and connect to different remote servers

jsc sports on Hotbird has no breakups

CanalDigital on Thor 1 west has Frequent breaks due to heavy load on this server

[dxman]

They run through a proxy, and connect to different remote servers

jsc sports on Hotbird has no breakups

CanalDigital on Thor 1 west has Frequent breaks due to heavy load on this server
thank you mate ,i must say it is nice to see your name
good work anyway,unfortunately got little bit upset in a way the software does a good job
thanks for the info

[Giga]

its running here without freezes on TM, TM settings
Baudrate: 115200
Filter: Auto
all others: OFF
cable should not be longer then 5 meter.
Good test would be: clarke tech editor, if you can down/up load the channel list without problem it should function.
Internet connection could be an issue? check firewall/router log for blocked traffic.
Times from 574 ms to 984 ms, showing in dos window, had one freeze with 5332 ms
Nordic is overloaded as you indicated: 5000 ms to 7000 ms

[holmroad]

NO: 8281 = C S
Simple Serial Sharing Protocol sits under Instalation : Option: Serial Mode:

Cheers mate, think you must be the FIRST person ever to define 'SSSP' which frankly meant sweet FA to me up to now, despite asking several times PLUS Googling!
Assume this setting menu is on the TM6900HD Super?:respect-040:

[Giga]

Assume this setting menu is on the TM6900HD Super?:respect-040:
Yes: Main Menu: Instalation : Option: Serial Mode:

[holmroad]

Yes: Main Menu: Instalation : Option: Serial Mode:

Thanx for that - as always Giga!:respect-050:

[^^COMPASS^^]

Updated Server Details for Jsc sports
Get it from Here :

https://www.satpimps.co.uk/showthread.php?p=725708#post72570 8

[holmroad]

Now got it all connected as explained (I 'hope'!) but getting loads & loads of '7023 timeouts'!
So still not opening either JSC Sports 1-10 on 13E, OR C+ Nordic on 1W!
Assume its USB/9 pin null modem adaptor into laptop USB, set as COM port 1 and other end of 9 pin null modem into back of TM6900HD Super - and not all other way round?:iamwithstupid:

Bit later, now saying 'jcs sports 1 open' - with JSC Sports 1 selected, but still not actually opening it!

[holmroad]

Latest news:
Got several channels on C+ Nordic 1W working fine, will have to rescan some as long time since last open with M2+ card!
Still nothing opening on JSC Sports 1-10 on 13E for some reason!:respect-067:

[pmb]

Are you using todays file and not an older version?

[holmroad]

Yes was using today's latest file - and just gone away from 1W on which even the HD channels working, albeit a bit jerkily from time to time, but gone back to JSC Sports which are ALL now working ok!
GREAT eh - thanks again to Compass AND you all for helping me get there in the end!:respect-067:

[^^COMPASS^^]

Updated Jsc sports Again
Added art on Hotbird :respect-069:

https://www.satpimps.co.uk/showthread.php?t=133840

[holmroad]

Updated Jsc sports Again
Added art on Hotbird :respect-069:

https://www.satpimps.co.uk/showthread.php?t=133840

Compass mate, you are a STAR MAN!!
Many thanks from us all!:respect-040::bowing-036::respect-053::grouphug:

[a1]

hi compass
all i get is cannot read file
rgds a1

[holmroad]

Sorry mate, but all I can now get is C+ Nordic 1W - and thats stopping & starting all the time - even more than before!
But NO JSC Sports or ART on 13E!;)

(may try going back to previous file in the morning!)

[^^COMPASS^^]

Sorry mate, but all I can now get is C+ Nordic 1W - and thats stopping & starting all the time - even more than before!
But NO JSC Sports or ART on 13E!;)

(may try going back to previous file in the morning!)

jsc sports is working as is art on hotbird ;)

[holmroad]

jsc sports is working as is art on hotbird ;)

Well it wasnt working last night at 1115pm mate - not on ANY of JSC Sports 1-10, or ART on 13E, only a few C+ Nordic on 1W!
Maybe it was due to the late hour? All I was getting were 'timeouts' or 'not open' messages on the little black screen on 13E! I tried them all for over 20 mins without success!
Trying it again now at 940 am this morning - and lo & behold its all working perfectly, so weird eh?
So thanks once more Compass, you truly ARE a star man!:respect-067:

[bigfoot1974]

Thanks compass all working great here on TM1500CI+SUPER
thanks for all of your hard work.

[Giga]

hi compass
all i get is cannot read file
rgds a1
vague description? if you can not unpack the file: use 7zip:

www.7-zip.org
you should have a dos window opening showing a lot of current day and time stamps.
last line should show plain sssp-client 127.0.0.1 granted (tuner, au=0)
if you have SSSP enabled in your receiver and selecting one of the channels you should have other messages appearing

[munir]

guy's i know i'm asking for this..but what channels on iw dose this clears?

[munir]

guy's i know i'm asking for this..but what channels on iw dose this clears?

no problam guy's ..sorted thank you..

[^^COMPASS^^]

24-05-2010 update

I have updated the server details For Jsc Sports

Here: https://www.satpimps.co.uk/showthread.php?p=725993#post72599 3

[paudie]

thanks compass from a newbie
hope i will get the football tomorrow night.

[pricey]

Hope this is still working. Have convinced myself that it's worth buying a USB/Null modem adapter for the laptop to get use out of my 6900!!! :)

[^^COMPASS^^]

I will update the servers when i can but i'm taking the family away in our caravan to ripley caravan park on Friday won't be back until Wednesday.

Compass...

[holmroad]

Hope this is still working. Have convinced myself that it's worth buying a USB/Null modem adapter for the laptop to get use out of my 6900!!! :)

Thats what I did for mine mate!
Now working fine - JSC fine with few freezes, but 1W there are quite a few for some reason - for ME that is of course!:respect-050:

[tony52]

I will update the servers when i can but i'm taking the family away in our caravan to ripley caravan park on Friday won't be back until Wednesday.

Compass...

enjoy your mini holiday, and have a great time:cheers2:

[Learning]

Enjoy compass m8.

[Barney]

Have fun Compass and enjoy the weekend and thnxs a lot for your support :respect-023: :king-041: :respect-048:

[paudie]

thanks again compass.
saw the irish game last night
brilliant.

[bigfoot1974]

thanks again for all your hard work (compass)
hope you enjoy your break,you certainly deserve it.
enjoy

[dodgybrook]

dont forget my rock:respect-062:

[^^COMPASS^^]

Added Tring Tv Eutelsat 16E
Cyfra on Hotbird 13E


Canal Digital on Thor working
Jsc Sports on Hotbird working


Enjoy


Get it from here: https://www.satpimps.co.uk/showthread.php?t=133840

[robrob]

cheers compass, hope u have a nice weekend :respect-023:

[^^COMPASS^^]

Updated Jsc Sports on Hotbird


Canal Digital on Thor working
Tring Tv Eutelsat 16E working

get it from Here: https://www.satpimps.co.uk/showthread.php?t=133840

[pricey]

Can anybody direct me to a store that has a USB/null modem adapter for my laptop. I have a 9 pin cable but don't fancy dismantling the PC and taking it to the living room! Tried in Belfast today but no luck.

[^^COMPASS^^]

Can anybody direct me to a store that has a USB/null modem adapter for my laptop. I have a 9 pin cable but don't fancy dismantling the PC and taking it to the living room! Tried in Belfast today but no luck.

just searched usb to serial on flea bay

found one for 4 quid inc free del

hope it helps

[pricey]

Is this what I need - USB to Serial RS232 (9 Pin) Adaptor / Converter??? Sorry for asking - just overwhelmed with the variety!!!!!!!!!!

[^^COMPASS^^]

Is this what I need - USB to Serial RS232 (9 Pin) Adaptor / Converter???

yes it convert your usb port into a serial port via the (usb to serial adapter)

which then alows you to connect your null modem cable.

make sure the serial adapter you wish to purchase supports your operating system

Eg a friend upgraded his pc from xp to vista some time ago and vista drivers weren't supported on the disk that came with the adapter, i got past this by searching online for the appropriate drivers and all was well in the end, but ideally you would wish to avoid the hassle.

[pricey]

Thanks Compass. Have a great weekend.

[beamish]

hello guys
im getting jsc ok but not getting most of 1 west on my tm 5400 super plus is there a ling to freq and whats open
beamish:respect-049:

[Giga]

check your timings (ms) on the dos box if these are to great you will have freezes.
Animal Planet on 11229 H SR 24500 check websites like KoS or lyngsat to see what channels Canal+ Nordic offers, no guarantee all of these open

[holmroad]

check your timings (ms) on the dos box if these are to great you will have freezes.
Animal Planet on 11229 H SR 24500 check websites like KoS or lyngsat to see what channels Canal+ Nordic offers, no guarantee all of these open

Can you suggest a 'DOS' - whatever that is mate - setting to avoid freezings on a TM6900HD Super please?:iamwithstupid:

[Giga]

DOS as from in the old days (M$ Disk Operating System) it is the command line window opening (black and white text). The timing issue is between the C S server > internet > and the receiver. below 1000 ms should work below, 300 ms would be good, above 1000 ms is to slow. Nothing much we can do about this on our side.

[archiesat]

can anyone point me in direction of hamedonnet.rar as i cant find it on forum


cheers archie

[pmb]

can anyone point me in direction of hamedonnet.rar as i cant find it on forum
cheers archie

It was on the first post of this thread but has been removed. You need last nights file from the other thread.

[archiesat]

cheers m8 many thanks


archie

[holmroad]

DOS as from in the old days (M$ Disk Operating System) it is the command line window opening (black and white text). The timing issue is between the C S server > internet > and the receiver. below 1000 ms should work below, 300 ms would be good, above 1000 ms is to slow. Nothing much we can do about this on our side.

Thanks Giga mate, so can you point me where to change the setting if necessary, or is it in the TM6900HD SSSP menu part please?:respect-055:

[Giga]

nothing we can change, perhaps ^^COMPASS^^ can, but not this weekend from his home on wheels, I think

[AnyAirPlane]

Hi,

Please advise me where to look for last nights othe thread, I must be going blind because I just can't see it :(:(

[pmb]

Hi,

Please advise me where to look for last nights othe thread, I must be going blind because I just can't see it :(:(

Look on the technomate forum. It's the one currently under this entitled Canal-digital..... Compass has linked to it several times on this thread.

[Learning]

@anyairplane
post number 70 in this thread m8 just click on it and download the zip file contains the prog
unpack it to desktop
Plug your Pc to Your TM Receiver (It is compatible with USB To serial for Laptop's)

1.Unpack
2. start CILQUER ICI .exe
3. Depending on your STB you may need to enable SSSP in your receiver Menu or just change channel to activate sssp on TM1500

as per compass instructions

[^^COMPASS^^]

Quick update for JSC sports on Hotbird before i'm away

Jsc+1 on Hotbird 100% ok
Jsc+2 on Hotbird 100% ok
Jsc+3 on Hotbird 100% ok
Jsc+4 on Hotbird 100% ok
Jsc+5 on Hotbird 100% ok
Jsc+6 on Hotbird 100% ok
Jsc+7 on Hotbird 100% ok
Jsc+8 on Hotbird 100% ok
Jsc+9 on Hotbird 100% ok
Jsc+10 on Hotbird 100% ok

https://www.satpimps.co.uk/showthread.php?p=726401#post72640 1

[AnyAirPlane]

Thanks Compass and Learning for the pointer and instructions. I have downloaded to pc and will have a play in the near future when time permits.

Thanks,

AAP.

[paudie]

thank you compass
i have a 1500 5400 6900 and i taught i would have to change but you have given us a new lease of life.
thank you again.

[FOX]

Apperciate any helps!!
Coonect my TM6900 to my laptoop through a null modem and USB-RS232 adapter and I am getting error when starts the 'click ici' on Compass utility. Any way to test this may eb to see first the connectivity from laptop to the receiver. Thanks

[kery]

I have a 6900 hd combo not super and had the same problem loaded it keep saying error tried everything so turn of laptop and tm re started them and all ok just make sure file is up to date as compass is away on holidays he is doing a great job for us hope this helps

[pmb]

Apperciate any helps!!
Coonect my TM6900 to my laptoop through a null modem and USB-RS232 adapter and I am getting error when starts the 'click ici' on Compass utility. Any way to test this may eb to see first the connectivity from laptop to the receiver. Thanks

Have you looked at the posts regarding changing com port on USB adapter to com 1? It gives unable to open com port (or something similar) if not . Just put Jaz +3 on for the play off final and it's working fine. You should use the latest file also. Is it the same as my 6800HD where you have to enable SSSP mode?

edit: spoke to soon JSC seems to have gone off. At least the football is fta on sportitalia 12.5W

[FOX]

I have a 6900 hd combo not super and had the same problem loaded it keep saying error tried everything so turn of laptop and tm re started them and all ok just make sure file is up to date as compass is away on holidays he is doing a great job for us hope this helps

yes tried this and unfortunately no success. I am using the 'JSC,13°E,Canal-Digital0.8°W,28-05-2010_by_Compass' file which I believe is the latest one. I have also changed the 'mpcs.conf' file for tty1 as suggested but no avail.
I have just got the USB/RS232 adapter and not sure if connectivity to receiver is right and the right driver are used. Is their any utility that we can try to test the Laptop/TM6900 connectivity?

[pmb]

The latest one says ...2nd... in the filename. Try the bulsat file on the technomate section. This doesn't need the com port changing when I tried it but it's not quite as user friendly. What is the full error message?

[FOX]

The latest one says ...2nd... in the filename. Try the bulsat file on the technomate section. This doesn't need the com port changing when I tried it but it's not quite as user friendly. What is the full error message?

The message I am getting 'Portcom error /dev/ttyS0'.

[pmb]

The message I am getting 'Portcom error /dev/ttyS0'.

That's exactly what I had. Look at posts 16 & 19. The default USB port when using an adapter isn't com 1 so needs to be changed under device manager.

[alboke]

(The default USB port when using an adapter isn't com 1)
and needs to be changed to com1..
motherboard comport needs to be changed to allow use of comport1 for usb adapter first
had same problem also change baud rate to same as listed in sssp
works 100% once sorted

[FOX]

Changed to COM1 and baud rate as 115200 as sssp on TM6900 not getting an error but just stopped at the last line below.
---------------------------------------------------------------------------------------

2010/05/29 16:28:20 6048 s **** mpcs newcamd 2.5.0 by Boulmaouahibe<<stdout
2010/05/29 16:28:20 6048 s Cannot open file "./mpcs.sid" (errno=2)
2010/05/29 16:28:20 6048 s userdb reloaded: 0 accounts freed, 1 accounts loa
ded
2010/05/29 16:28:20 6048 s conneting to newcamd-services 1&2....
2010/05/29 16:28:20 6048 s 2593 service-id's loaded
2010/05/29 16:28:20 6048 s 36 lengths for caid guessing loaded
2010/05/29 16:28:20 6048 s monitor: disabled
2010/05/29 16:28:20 6048 s camd 3.3x: disabled
2010/05/29 16:28:20 6048 s camd 3.5x: disabled
2010/05/29 16:28:20 6048 s cs378x: disabled
2010/05/29 16:28:20 6048 s newcamd: disabled
2010/05/29 16:28:20 6048 s radegast: disabled
2010/05/29 16:28:20 6048 s logger started (pid=6072)
2010/05/29 16:28:20 6048 s resolver started (pid=6084, delay=30 sec)
2010/05/29 16:28:20 6048 s proxy started (pid=6096, server=satna.zapto.org)
2010/05/29 16:28:20 6048 s proxy started (pid=6120, server=reserv.mine.nu)
2010/05/29 16:28:20 6048 s proxy started (pid=4300, server=217.113.237.134)
2010/05/29 16:28:20 6048 s proxy started (pid=428, server=bliner-key.dyndns.
org)
2010/05/29 16:28:20 6048 s anti cascading: disabled
2010/05/29 16:28:20 6048 s serial: initialized (pid=5728, auto@/dev/ttyS0)
2010/05/29 16:28:20 6096 p02 proxy satna.zapto.org:1000 newcamd525 (fd=4)
2010/05/29 16:28:20 4300 p04 proxy 217.113.237.134:10000 newcamd525 (fd=4)
2010/05/29 16:28:20 428 p05 proxy bliner-key.dyndns.org:10000 newcamd525 (fd=
4)
2010/05/29 16:28:20 6120 p03 proxy reserv.mine.nu:15001 newcamd525 (fd=4)

[pmb]

JSC seems to be working but keeps locking up. Haven't changed my baud rate. You should see a line saying by compass jsc or nordic etc every 10 secs in between another line.

[Giga]

is not finding the TM6900 should find a tuner, have you connected with a working null modem cable?

[FOX]

is not finding the TM6900 should find a tuner, have you connected with a working null modem cable?

I believe so. Just got it from a bid site with ref : SL901 - DB9 Female DB9F 9 pin RS232 Serial Null Modem 2m Cable

I am also using USB/232 adpater: USB to SERIAL RS232 DB9 9PIN Lead Cable Adapter but not sure about the driver installation of the adapter

[pmb]

As Giga says the next lines should have a provider id and something like 4digits followed by c01 tuner , lots of hex digits followed by open then a time in msecs. This is for JSC. Have a look at TV4 1W 11216V 24500 as that has a different screen. Does sound like the com port is fine but not talking to the box.

[FOX]

Many Thanks I managed to crack it with your great helps. Thanks

[stefan]

Can anyone help???
I have all the JSC channels working fine. Running a tm 5400 super with sssp.
But when it comes to nordic channels W1. Its a different story!!!
I clear picture... Then the program flashes up "filtered" and then "timeout".
Then i lose picture...
What am i doing wrong?

[holmroad]

Can anyone help???
I have all the JSC channels working fine. Running a tm 5400 super with sssp.
But when it comes to nordic channels W1. Its a different story!!!
I clear picture... Then the program flashes up "filtered" and then "timeout".
Then i lose picture...
What am i doing wrong?

Yes mate, I get that a lot too, but not on JSC Sports, strange eh?:respect-055:

[ceyer]

I guess there are too many people watching that package at all times??!

BTW is Tring on 16E still clearing ?

[pmb]

BTW is Tring on 16E still clearing ?

Just had a look on 11283H 27500 (is that the only channel?) and it seems not to be clearing the video. Timeout.... It was working earlier. JSC is fine as of today 2/6/10

[^^COMPASS^^]

just browsing the forum from my caravan using a dongle i just cannot keep away lol :cheers2:

[Giga]

if you have a USB dongle with HSDPA (7.2Mbps) and your provider (Vodafone Mobile Broadband) supports it? You would hardly notice you're not on a wired connection (ADSL ± 3 Mbps)

[holmroad]

just browsing the forum from my caravan using a dongle i just cannot keep away lol :cheers2:

Its an impossible dream - always assuming you have the requisite technology at hand!!
Sad old me recently had 3 weeks hols in the Seychelles, took my laptop, they had a mega hotspot in the hotel - and eureka, I kept in touch!!
Sad old me! :number-one-043:

[pricey]

My adapter arrived today and I tried it after loading the disk that came with it. I am getting 'Portcom error /dev/ttyS0'. I have read that this is something to do with changing Com ports via the Device Manager. Can someone help a computer thicko and tell me how to change ports? I have a laptop running XP. Thanks. :(

[keith mawer]

to add my bit i cant receive any ksc now via my diablo ,,,,
ATT HOLMROAD, ARE THE SEychelles a bit like frinton on sea es***

[pineapple jack]

if you have a USB dongle with HSDPA (7.2Mbps) and your provider (Vodafone Mobile Broadband) supports it? You would hardly notice you're not on a wired connection (ADSL ± 3 Mbps)


The other side of the coin is that I'm using a dongle but I'm in a 2G area and getting 30kbps/20kbps so worse than when I had dialup years ago.

[holmroad]

to add my bit i cant receive any ksc now via my diablo ,,,,
ATT HOLMROAD, ARE THE SEychelles a bit like frinton on sea es***

Identical mate!!!:respect-067:

(Where's Frinton??lol!!!)

[nedisared]

Big thanx compass this works a treat!

[keith mawer]

att mr h.. frinton on sea is in es***,,, nioe beach huts on the beach for making a cuppa!! >AND WILD LIFE like ya dog and cats around seems jsc sports is via 4 ,, so thats why no luck!!

[holmroad]

att mr h.. frinton on sea is in es***,,, nioe beach huts on the beach for making a cuppa!! >AND WILD LIFE like ya dog and cats around seems jsc sports is via 4 ,, so thats why no luck!!

And a pebbly 'pay for' beach?:respect-055:

[Giga]

My adapter arrived today and I tried it after loading the disk that came with it. I am getting 'Portcom error /dev/ttyS0'. I have read that this is something to do with changing Com ports via the Device Manager. Can someone help a computer thicko and tell me how to change ports? I have a laptop running XP. Thanks. :(
right mouse click on this computer: window opens System Properties select Hardware: Device Management
there you would either find it back under Com & LPT or USB. If you find the device, normally you would find it possible to change the port number in its properties.

[pricey]

Thanks Giga. I appreciate the help. Fantastic - got it working. Many thanks to Compass!! :)

[AnyAirPlane]

Many thanks Compass and all others who have added little bits of advise to this thread.
I just connected the cable from pc to TM6800HD super, enabled SSSP in menu as advised, started Cilquer and JSC clears, not had any joy with 1w channels as yet.

Thanks for all the help.

AAP

[paudie]

disney and xd are clearing olso history and canal first but no luck with sfnd yet hope somebody can help

[holmroad]

disney and xd are clearing olso history and canal first but no luck with sfnd yet hope somebody can help

It varies dramatically during the day as to how many channels you can open on 1W C+ Nordic, but I frequently get Eurosport HD, BBC HD, Canal first (but NOT ESPN HD), etc - but they all tend to freeze up a lot, maybe due to the usage by a lot of people - unlike JSC Sports 1-10 on 13E, all of which work without ANY freezes for me!:respect-051:

[andy gg]

Well done Compass you have done a great job many thanks from us all.
regards
andy gg

[pineapple jack]

So it the Hamedonnet.rar file not available on here ??? :confused:


I did find it elsewhere after a search and unpacked and got as far as the DOS window but I kept getting "login failure" and a name.

[Giga]

did you try this one, last one I could find here:
https://www.satpimps.co.uk/showpost.php?p=726691&postcount=3 <= click here

[pineapple jack]

Thanks for that.


Unfortunately when I unzip that file I get the DOS window but it says


This application hs failed to start because cygwin1.dll was not found.

[Giga]

when you unzip this file, unzip all including folders. When unzipped there is a folder JSC,13°E,Canal-Digital0.8°W,28-05-2010_by_Compass move this file to the root of a harddisc and rename it to a short name so you recognize it what is for. Inside this folder you find these:

23-04-2010 11:39 1.059 CILQUER ICI TELESATDZ.exe.stackdump
03-04-2007 19:39 217.600 CILQUER ICI .exe < double click this one
19-12-2006 22:53 1.872.821 cygwin1.dll
22-04-2010 12:13 261 mpcs-newcamd.dll
22-04-2010 10:02 97 mpcs.conf
15-04-2010 07:59 954 mpcs.exe.stackdump
22-04-2010 10:02 1.318 mpcs.guess
26-05-2010 15:45 1.303 mpcs.server
22-04-2010 10:02 44.256 mpcs.srvid
26-05-2010 15:47 99 mpcs.user
24-05-2010 11:58 0 tekst.txt
24-05-2010 11:57 0 tekt.txt

[pineapple jack]

Thanks I'm a bit further ahead I'm getting the DOS window to open for a second or two but at the bottom it says cardserver down.

[^^COMPASS^^]

Thanks I'm a bit further ahead I'm getting the DOS window to open for a second or two but at the bottom it says cardserver down.

JSC Sports is still open m8

[pineapple jack]

I'm using a dongle and it's very slow dialup speeds so that probably doesn't help.


I get a landline internet service next week.


Why does the little window only stay open for a few seconds it's hard to read the log ?

[holmroad]

I'm using a dongle and it's very slow dialup speeds so that probably doesn't help.


I get a landline internet service next week.


Why does the little window only stay open for a few seconds it's hard to read the log ?

You dont really need to worry unduly about the little window mate, because it fluctuates so dramatically on what its telling you, e.g. timeouts, filters, openings, etc etc!:respect-055:

[pineapple jack]

Thanks everyone,I'll wait until I have a proper BB connection as my dongle is drooping ?????? :) the speed and latency are terrible.

Trying to do the job without the right tools is an exercise in frustration.

[holmroad]

Thanks everyone,I'll wait until I have a proper BB connection as my dongle is drooping ?????? :) the speed and latency are terrible.

Trying to do the job without the right tools is an exercise in frustration.

Dongle drooping eh mate, NOT a pretty sight!!!!:bravo-009:

[pineapple jack]

Hey I've managed to get a few of the 1W channels working......:king-042: but only for a short time and when I read the log there are a lot of tuner timeouts so I think my connection is too flaky.


I think I'm going to have to get a house next to the tel exchange. :seeya:

[holmroad]

Hey I've managed to get a few of the 1W channels working......:king-042: but only for a short time and when I read the log there are a lot of tuner timeouts so I think my connection is too flaky.


I think I'm going to have to get a house next to the tel exchange. :seeya:

But thats exactly what many of us are already getting mate as I posted earler - yet JSC Sports 1-10 on 13E are fine!:respect-050:

[FOX]

Is JSC black now for anyone? doo see lot of login failures.

[charlie]

Tried JSC for the first time today not opening,1w is clearing but still freezes.

[FOX]

It was on earlier on as I was watching the world cup concert and stopped. Anyone having anyl luck?

[pricey]

JSC not opening for me. 1W and 16w not worth it due to freezing. Seems to be better earlier in day when servers not overwhelmed. Watch 66 on ITV HD!!!:respect-013:

[^^COMPASS^^]

update for JSC sports & Cyfra+ on Hotbird

gat it from here : https://www.satpimps.co.uk/showthread.php?p=729692#post72969 2

[holmroad]

Thanks as always Compass mate - can you just remind me of the content (channels) with Cyfra+ - assume its not Polsat?:respect-040:

[paudie]

thank you again compass

[unknown1]

update for JSC sports & Cyfra+ on Hotbird

gat it from here : https://www.satpimps.co.uk/showthread.php?p=729692#post72969 2
Doesnt work mate.

[Giga]

Doesnt work mate.
errno=111

[unknown1]

errno=111

What file is that in? cant find it

Got TM1000D

[Giga]

What file is that in? cant find it that is showing in the dos window, server no longer there?

[unknown1]

Yeah i can find server manully anyway. 9 and 10 and World cup channel dont open the rest do.

[^^COMPASS^^]

updated again

for JSC sports on Hotbird

[unknown1]

updated again

for JSC sports on Hotbird

Hi Compass. Any idea why 9+ 10+ and World Cup doesnt work on TM1000D? The rest do.

I get

c01 tuner babababalababla not open

[bsnake]

updated again

for JSC sports on Hotbird

hi compass, iget jsc sport open from ch +1 till +8, any chance to get the rest (+9,+10) open aswell plz? thanx

[AnyAirPlane]

Hi All

JSC +9 and +10 opening here.

Thanks again Compass

[unknown1]

Hi All

JSC +9 and +10 opening here.

Thanks again Compass

Which reciever you got ?

BTW I managed to get the world cup CH to open with WSP and fix the sound by press 9797 on remote. But still 9+ and 10 refuse to open.

[AnyAirPlane]

Not working for me at the moment

[FENEKI]

Sport signal disruption condemned

Football fans across the Arab world were furious when they tried to watch the opening game of the World Cup and found the signal was blocked.

Al Jazeera Sport, the network with exclusive broadcasting rights for the tournament in the Middle East and North Africa, has said its signal was deliberately jammed on satellite channels Nilesat and Arabsat in an "act of piracy".

Viewers were faced with blank or frozen screens when they tried to watch the opening game between Mexico and South Africa on Friday.

Al Jazeera's signal returned in the second half of the match, but the quality was patchy.

Some commentary for the game also appeared in the wrong language.

"We apologise for the interruption that happened, it was because of satellite interference from an unknown source," Nasser al-Kholeifi, the managing director of Al Jazeera Sport, said.

Al-Kholeifi said he was astonished that the World Cup signal was blocked because it was "not a political programme, but a sporting event.

"We will do whatever we can to find whoever was responsible".

Viewers upset

But some viewers are still upset with Al Jazeera Sport.

"What happened is shameful, the World Cup only happens every four years," one football fan in Gaza said.

"We were in a coffee shop and we tried to find another place and they had the same problem."

Another viewer in Gaza said: "We have lost our patience for this mistake. We are waiting to watch the only Arab team, Algeria."

Nilesat, the Egyptian satellite company, has said it is investigating the source of the jamming.

The company pledged to "take all measures necessary against such an irresponsible act that violates all international laws and norms".

Al Jazeera is promising to pursue legal action over the incident.

"After months of negotiations with Fifa, we want out Arab viewers to enjoy a few of the World Cup events for free," al-Kholeifi said.

"But sadly, there are some people who have political agendas to the contrary. We will do our utmost to find who was behind it."

__________________
Diablo Cam2+Technomate 6900 HD Super + CCcam :coolgleamA:

[^^COMPASS^^]

Added ThemeX On Hotbird

11471 V 27500-5/6

ThemeX-SOS2-Groups
ThemeX-Peep
ThemeX-Bizarre
ThemeX-Inter
ThemeX-TransX

Get it from here : https://www.satpimps.co.uk/showthread.php?p=730250&posted=1#post730250

[2colby]

You are doing a great job with these files that you keep posting

Thank you ,very much
2colby.

[holmroad]

Well sorry, but all I can still get is JSC Sports 1-10 on 13E and a few C+ Nordic on 1W (but Eurosport HD not currently even trying in small black panel, nor C+ Sport HD, nor C+ Film HD - all of which were opening last week!
On 13E Theme X and Cyfra+ certainly not working - sorry!:respect-069:

[^^COMPASS^^]

Well sorry, but all I can still get is JSC Sports 1-10 on 13E and a few C+ Nordic on 1W (but Eurosport HD not currently even trying in small black panel, nor C+ Sport HD, nor C+ Film HD - all of which were opening last week!
On 13E Theme X and Cyfra+ certainly not working - sorry!:respect-069:

Theme X is ok here :respect-048:

[2colby]

For me JSC sports has not worked for the last two updates,but now I can get theme X with very few break ups ,Tring not quite as well,1 west channels lots of breaks and Cyfra
nothing at all.
But I will keep trying,thats what this hobby is all about.Thanks to Compass for all his efforts.

[holmroad]

Theme X is ok here :respect-048:

Sorry, had still got Theme X on old frequency of 12360H, but working fine on new frequency!
Cyfra+ working on some of it - but not PolsaT!
Thanx again Compass!:respect-050:

[Hadziano]

sorry guys,can any1 help me through this?how do i get jsc sports?

[Hadziano]

is this true..??

"THIS SOFTWARE NAME IS SAIDIA

NOW U CAN WATCH SCRAMBLED CHANNELS WITHOUT ANY CLINE OR DLINE JUST USE THIS SOFTWARE BY NET U CAN WATCH MANY CHANNELS I HAVE CHECKD JUST HOTBIRD'S CHANNELS PLZ CHECK ND REPLY FOR OTHERS SATELLITES ITS 100% CONFIRM NEWS
ECHOLINK AND STARSAT USER JUST SELECT GBOXSSSP

Stay on any encrypted channel
(which you select it as a package)

from the net you will get the code
sent to your receiver
and finally channel will open

Tested by me and works fine on JSC 1/2/3/4 and ART on 13E Hotbird Waiting for your replys.What other packages you open?
"

[^^COMPASS^^]

16-06-2010

Updated
ThemeX On Hotbird 11471 V 27500-5/6

Jsc+1 => Jsc+8 11296 H 27500

Get it from here : https://www.satpimps.co.uk/showthread.php?t=133840

[hianta]

First time i've tryed to connect through the web....(tm 5400)

100% thanks COMPASS :respect-046:

[soussss]

after unzipping a warning windows box pop out saying that cygwin1.dll missing
am i doing something wrong here .
does this need a program to run it through when you click on clique ici.exe.
please help
thanks:confused:

[pineapple jack]

I did that, I wasn't highlighting and unzipping all of the files.

Once I unzipped all of the files then it worked.

Just highlighting cilquer ici.exe isn't enough you need them all.

Once they have been extracted to your Sat folder (or whatever you call yours) you then click on the ThemeX folder and then click on the cilquer ici one and the little black window appears.

On my receiver Technomate 1500CI+ I then have to go up or down a channel and then within the little black window the info starts scrolling down and you can see when the tuner is open.

[2colby]

Good explanation Pineapple Jack.Whats the weather like in NE Scotland?.
Thankyou,
2colby.

[soussss]

hi
got that thanks . how can you check that you are have connection with the box through the serial cable . how can you pin the box can you see it through the black window that appear on the pc.
the program is running on the pc but nothing hapening on the box
thanks

[pineapple jack]

Good explanation Pineapple Jack.Whats the weather like in NE Scotland?.
Thankyou,
2colby.


Well let me put it this way.......when the sun shines in Aberdeen people think it's a UFO. :respect-059:


Today wasn't bad. :applause-003:

[Giga]

hi
got that thanks . how can you check that you are have connection with the box through the serial cable . how can you pin the box can you see it through the black window that appear on the pc.
the program is running on the pc but nothing hapening on the box
thanks
Serial cable needs to be a null-modem cable max distance 5 meter, with this channel editor you can test your connection: Clarke Tech Editor Studio (https://www.satpimps.co.uk/showthread.php?t=110802) <= click here
if program is running you can select the window (bring it in the foreground) with the [ALT] press and keep pressed down, pressing [TAB] lets you cycle through the running programs: should show as icon c:\ with the program name cilquer ici.exe
if the box is not showing it should be on your taskbar with the c:\ icon, right click on it and check then properties running and let system position window.

[Hadziano]

guys quick question...does your laptop always need to be swtiched on with this procedure?

[holmroad]

guys quick question...does your laptop always need to be swtiched on with this procedure?

Only whilst you wanting to actually WATCH mate!!:respect-050:

[soussss]

thanks giga
well explained do you have to alter anything on the box sssp or rs323?
thanks again:respect-050:

[holmroad]

Anyone else having probs opening Theme X with latest Compass file (17/6)?
Also not picking up ANY JSC Sports (13E) 1-10, only a few Cyfra+ - yet 1W Eurosport HD coming through ok!
Odd!:confused:

[andy gg]

same here not working with latest edition in jsp or the theme xxx: used to open jsc with the other weeks version OK.
But it is opening OK on Thor but little bit of freezing on the discovery channel the discovery HD channel running but no sound.

[^^COMPASS^^]

18-06-2010

Updated
ThemeX On Hotbird 11471 V 27500-5/6



Get it from here:
https://www.satpimps.co.uk/showthread.php?t=133840

[holmroad]

Allup and working again thanx Compass - you ARE a star mate!
(Theme X, JSC Sports 1-10, JSC Sports HD + 3D, JSC World Cup, etc):respect-067::respect-055:

[Giga]

thanks giga
well explained do you have to alter anything on the box sssp or rs323?
thanks again:respect-050:
sssp on box (https://www.satpimps.co.uk/showpost.php?p=725693&postcount=3) <= click here

comport properties (https://www.satpimps.co.uk/showpost.php?p=728099&postcount=121) <= click here

comport settings on computer (https://www.satpimps.co.uk/showpost.php?p=725595&postcount=1) <= click here

when working (https://www.satpimps.co.uk/showpost.php?p=725885&postcount=12) <= click here

[ica]

Hi can anyone tell me if this is working on JSC sports this morning please?
Ian.

[holmroad]

Hi can anyone tell me if this is working on JSC sports this morning please?
Ian.

JSC Sports 1-10 not working for me - but Theme X still ok!;)

[^^COMPASS^^]

19-06-2010

Updated


Jsc+1 => Jsc+10 Hotbird 11296 H 27500
JSC Sports HD + 3D, Hotbird 10815 H 27500 3/4
JSC World Cup Hotbird 10815 H 27500 3/4

all ok



Canal Digital Sweden on thor ok


ThemeX On Hotbird ok
11471 V 27500-5/6
ThemeX-SOS1-Hardcore
ThemeX-SOS2-Groups
ThemeX-SOS3-Fetish
ThemeX-SOS4-18
ThemeX-Peep
ThemeX-Bizarre
ThemeX-Inter
ThemeX-TransX


Get it from Here : https://www.satpimps.co.uk/showthread.php?p=731590#post73159 0

[soussss]

hi
got it working at the end thanks a lot giga
well explained again
you re the man in this forum not like some talking ufos....
:respect-013:

[Giga]

is the point of this forum, help members where you can, from your own experience(s)

[^^COMPASS^^]

20-06-2010

Updated
ThemeX On Hotbird ok
11471 V 27500-5/6
ThemeX-SOS1-Hardcore
ThemeX-SOS2-Groups
ThemeX-SOS3-Fetish
ThemeX-SOS4-18
ThemeX-Peep
ThemeX-Bizarre
ThemeX-Inter
ThemeX-TransX





Canal Digital Sweden on thor ok


Jsc+1 => Jsc+10 Hotbird 11296 H 27500
JSC Sports HD + 3D, Hotbird 10815 H 27500 3/4
JSC World Cup Hotbird 10815 H 27500 3/4

all ok


Get it from Here : https://www.satpimps.co.uk/showthread.php?p=731676#post73167 6

[titus]

new to this and can't seem to get it right, i have have a 6900 super and installed latest patch, from phatom, i have added on addon 02( not added on o1) do i need too

i get to last line should show plain sssp-client 127.0.0.1 granted (tuner, au=0) on the box when running cilquer, but it says

stop poll
to may errors
incomplete requests (21 bytes) etc
tuner disconnected

can some one let me know what i am doing wrong etc

in 8280 does all this have to show active as on for all the line

[Giga]

8280 has nothing to do with this program! 8280 (https://www.satpimps.co.uk/showthread.php?p=643019) <= click here
make sure you use the latest program uploaded by ^^COMPASS^^ what is timings showed in the dos box window?

[titus]

thanks re 8280 and 8281, sorry about open text wasn't aware on that rule,

dont have correct status to add attachment,probally to do with internet connection as only using a dongle for internet.

[Giga]

yes sorry i meant 8281, i have the latest program, todays 20/06
8 2 8 1 Ethernet (https://www.satpimps.co.uk/showthread.php?t=114462) <= click here has nothing to do with this program!

copying text from dos box: right click on dos box frame and select:
edit
Select All you should notice a colour change in background and text
right click on dos box frame again and select Copy
you can now open notepad and paste copied info in to it

you can not post open text in messages: contains server info edit your previous post
in attachment you find result what output should look like, you could have network or internet issues timmings/dns?

[bebo911]

i have humax 5400z with last toh 3.1-11b and i receive the same result stop poll
the data received as shown below
--------------------------------------------------------------------------
2010/06/19 21:35:48 1028 s **** mpcs newcamd 2.5.0 by Boulmaouahibe<<stdout
2010/06/19 21:35:48 1028 s Cannot open file "./mpcs.sid" (errno=2)
2010/06/19 21:35:48 1028 s userdb reloaded: 0 accounts freed, 1 accounts loa
ded
2010/06/19 21:35:48 1028 s conneting to newcamd-services 1&2....
2010/06/19 21:35:48 1028 s 2593 service-id's loaded
2010/06/19 21:35:48 1028 s 36 lengths for caid guessing loaded
2010/06/19 21:35:48 1028 s monitor: disabled
2010/06/19 21:35:48 1028 s camd 3.3x: disabled
2010/06/19 21:35:48 1028 s camd 3.5x: disabled
2010/06/19 21:35:48 1028 s cs378x: disabled
2010/06/19 21:35:48 1028 s newcamd: disabled
2010/06/19 21:35:48 1028 s radegast: disabled
2010/06/19 21:35:48 1028 s logger started (pid=2240)
2010/06/19 21:35:48 1028 s resolver started (pid=508, delay=30 sec)
2010/06/19 21:35:48 1028 s proxy started (pid=1760, server=www-satna-biz.syt
es.net)
2010/06/19 21:35:48 1028 s proxy started (pid=3724, server=reserv.mine.nu)
2010/06/19 21:35:48 1028 s proxy started (pid=1112, server=meolsat.ath.cx)
2010/06/19 21:35:48 1028 s proxy started (pid=2084, server=bliner-key.dyndns
.org)
2010/06/19 21:35:48 1028 s proxy started (pid=1232, server=meolsat.ath.cx)
2010/06/19 21:35:48 1028 s proxy started (pid=520, server=62.141.51.179)
2010/06/19 21:35:48 1028 s anti cascading: disabled
2010/06/19 21:35:48 1028 s serial: initialized (pid=2144, auto@/dev/ttyS0)
2010/06/19 21:35:48 2084 p05 proxy bliner-key.dyndns.org:10000 newcamd525 (fd=
4)
2010/06/19 21:35:48 3724 p03 proxy reserv.mine.nu:15001 newcamd525 (fd=4)
2010/06/19 21:35:48 1232 p06 proxy meolsat.ath.cx:20002 newcamd525 (fd=4)
2010/06/19 21:35:48 1112 p04 proxy meolsat.ath.cx:20002 newcamd525 (fd=4)
2010/06/19 21:35:48 520 p07 proxy 62.141.51.179:1574 newcamd525 (fd=4)
2010/06/19 21:35:48 1760 p02 proxy www-satna-biz.sytes.net:2010 newcamd525 (fd
=4)
2010/06/19 21:36:32 2144 c01 Stop poll
2010/06/19 21:37:02 2144 c01 Stop poll
2010/06/19 21:37:56 2144 c01 Stop poll

[Giga]

if you have a c01 Stop poll problem:
@Titus, no problems

apparantly sssp is not set correctly in technomate:
Serial Mode: sssp (https://www.satpimps.co.uk/showthread.php?t=135079) <= click here

@bebo911
check settings for serial mode= not RS232 but sssp
can you edit your post and remove all server refferences
proxy started (pid=1760, server= server name), remove these please

[^^COMPASS^^]

Been playing around again trying to add Canal sat france 19.2E via Vplug & wsp,
only one channel would open Tps Star the main reason for this is that wsp would only accept the Tm's 1st Ecm, i scrapped the idea of using wsp to communicate with my Technomate receiver.

Added Canal sat France via Vplug
(Many thanks to vahid! for the keys)

I have configured CILQUER ICI to communicate with : SBCL v1.1b

So for the moment we have

Canal Sat France 19.2E open via public Keys

========================

Also open is


JSC World Cup Hotbird 11296 H 27500
Jsc+1 => Jsc+10 Hotbird 11296 H 27500
JSC Sports HD + 3D, Hotbird 10815 H 27500 3/4
-----------------------------------------------

ThemeX On Hotbird ok
11471 V 27500-5/6
ThemeX-SOS1-Hardcore
ThemeX-SOS2-Groups
ThemeX-SOS3-Fetish
ThemeX-SOS4-18
ThemeX-Peep
ThemeX-Bizarre
ThemeX-Inter
ThemeX-TransX
-----------------------------------------------

Canal Digital Sweden on thor ok

Get it from Here : https://www.satpimps.co.uk/showthread.php?p=731934#post73193 4

[limerick]

cant get jsc working had theme x working this evening but cant open anything now .getting "login failed for user 8141364493 and timeout 7047
any ideas on whats happening

regards limerick

[shambo1966]

the same here.working earlier on jsc and now the same as limerick login failed and timeout. anyone help?

[^^COMPASS^^]

the same here.working earlier on jsc and now the same as limerick login failed and timeout. anyone help?

ThemeX is down ATM


Jsc sports still works
Canal Digital Sweden on Thor ok

Csat france is ok

[Giga]

2 possibly reasons:

2010/06/22 8:46:05 3404 p07 login failed for user '8141364493'
2010/06/22 8:46:05 3404 p07 proxy serveraddress: port newcamd525 (fd=4)
2010/06/22 8:46:05 3440 c01 tuner (0500&032000/36B2/52:8D58): not open (62 ms)
2010/06/22 8:46:09 3440 c01 tuner (0500&032000/36B2/52:8D59): timeout (7047 ms)
to many users or you're not on the correct channel?
JSC 1 @13°E 11296 H 27500

2010/06/22 8:46:28 864 p02 server serveraddress: port caid: 0500
2010/06/22 8:46:28 864 p02 provider #0: 042400
2010/06/22 8:46:28 3440 c01 tuner (0500&042400/20F5/2F:FBF1): open (297 ms) by ^^compass^^jsc+1-jsc+10 &
2010/06/22 8:46:29 3440 c01 tuner (0500&042400/20F5/2F:FBF0): open (485 ms) by ^^compass^^jsc+1-jsc+10 &
2010/06/22 8:46:39 3440 c01 tuner (0500&042400/20F5/2F:C1C1): open (531 ms) by ^^compass^^jsc+1-jsc+10 &
2010/06/22 8:46:50 3440 c01 tuner (0500&042400/20F5/2F:C1C0): open (1500 ms) by ^^compass^^jsc+1-jsc+10 &
2010/06/22 8:46:59 3440 c01 tuner (0500&042400/20F5/2F:A2D8): open (453 ms) by ^^compass^^jsc+1-jsc+10 &
2010/06/22 8:47:09 3440 c01 tuner (0500&042400/20F5/2F:A2D9): open (567 ms) by ^^compass^^jsc+1-jsc+10 &
2010/06/22 8:47:19 3440 c01 tuner (0500&042400/20F5/2F:7805): open (484 ms) by ^^compass^^jsc+1-jsc+10 &

make sure you have correct transponder for jsc on 13°E
Main Menu: Installation: PID Search
Select 13°E satellite
Select Transponder 11296 H
Check Symbol Rate: 27500 Ms/s if not correct, select the Symbol Rate and key in correct Symbol Rate from remote 27500 when this is done or all OK:
press the ● SCAN button on your remote.

check your procedure if your box is not a TM-6(8/9)00 HD Super.

[titus]

i seem to have got a bit further but keep getting c01 Portcom error /dev/ttyS0,
i am using com 1 with vista, i have tried other com ports but to no avail, does anyone have any suggestoin,

i am using a usb to null modem cable, i don't know if that affects it

[joany]

Cable question - I have seen a cable on fleabay which is usb to 9 pin serial male. Am I correct in thinking the rs232 needs to be a female socket.

thanks in advance.

[eddieaok]

Hope you lads can help no joy so far with my TM 6900 Super

Dos log below

2010/06/23 22:55:52 6124 s **** mpcs newcamd 2.5.0 by Boulmaouahibe<<stdout
2010/06/23 22:55:52 6124 s Cannot open file "./mpcs.sid" (errno=2)
2010/06/23 22:55:52 6124 s userdb reloaded: 0 accounts freed, 1 accounts loa
ded
2010/06/23 22:55:52 6124 s conneting to newcamd-services 1&2....
2010/06/23 22:55:52 6124 s 2593 service-id's loaded
2010/06/23 22:55:52 6124 s 36 lengths for caid guessing loaded
2010/06/23 22:55:52 6124 s monitor: disabled
2010/06/23 22:55:52 6124 s camd 3.3x: disabled
2010/06/23 22:55:52 6124 s camd 3.5x: disabled
2010/06/23 22:55:52 6124 s cs378x: disabled
2010/06/23 22:55:52 6124 s newcamd: disabled
2010/06/23 22:55:52 6124 s radegast: disabled
2010/06/23 22:55:52 6124 s logger started (pid=5604)
2010/06/23 22:55:52 6124 s resolver started (pid=172, delay=30 sec)
2010/06/23 22:55:52 6124 s proxy started (pid=1216, server=www-satna-biz.syt
es.net)
2010/06/23 22:55:52 6124 s proxy started (pid=2808, server=reserv.mine.nu)
2010/06/23 22:55:52 2808 p03 proxy reserv.mine.nu:15001 newcamd525 (fd=4)
2010/06/23 22:55:52 1216 p02 proxy www-satna-biz.sytes.net:2010 newcamd525 (fd
=4)
2010/06/23 22:55:52 6124 s proxy started (pid=5464, server=meolsat.ath.cx)
2010/06/23 22:55:52 5464 p04 proxy meolsat.ath.cx:20002 newcamd525 (fd=4)
2010/06/23 22:55:52 6124 s proxy started (pid=3040, server=bliner-key.dyndns
.org)
2010/06/23 22:55:52 3040 p05 proxy bliner-key.dyndns.org:10000 newcamd525 (fd=
4)
2010/06/23 22:55:52 6124 s proxy started (pid=5092, server=meolsat.ath.cx)
2010/06/23 22:55:52 5092 p06 proxy meolsat.ath.cx:20002 newcamd525 (fd=4)
2010/06/23 22:55:52 6124 s proxy started (pid=2672, server=62.141.51.179)
2010/06/23 22:55:52 2672 p07 proxy 62.141.51.179:1574 newcamd525 (fd=4)
2010/06/23 22:55:52 6124 s proxy started (pid=4452, server=127.0.0.1)
2010/06/23 22:55:52 6124 s anti cascading: disabled
2010/06/23 22:55:52 4452 p08 proxy 127.0.0.1:6001 newcamd525 (fd=4)
2010/06/23 22:55:52 6124 s serial: initialized (pid=4932, auto@/dev/ttyS0)
2010/06/23 22:55:52 4932 c01 Portcom error /dev/ttyS0
2010/06/23 22:56:52 4932 c01 Portcom error /dev/ttyS0
2010/06/23 22:57:52 4932 c01 Portcom error /dev/ttyS0
2010/06/23 22:58:52 4932 c01 Portcom error /dev/ttyS0
2010/06/23 22:59:52 4932 c01 Portcom error /dev/ttyS0
2010/06/23 23:00:52 4932 c01 Portcom error /dev/ttyS0

[titus]

Cable question - I have seen a cable on fleabay which is usb to 9 pin serial male. Am I correct in thinking the rs232 needs to be a female socket.

thanks in advance.

it does have to be female, but i use a 9 pin male to female pin cable as well so a usb to male is ok with me.

[titus]

i seem to have got a bit further but keep getting c01 Portcom error /dev/ttyS0,
i am using com 1 with vista, i have tried other com ports but to no avail, does anyone have any suggestoin,

i am using a usb to null modem cable, i don't know if that affects it

good news i work out the problem for com port error, my cable was to long it seems, bad news is i don't have a decent download speed for this program as i use the internet via a dongle, but i think i get a better broadband supplier when my contract runs out so i'll be ok then.

[Giga]

not exactly: comport on computer is always D9 male pin
USB to serial converter:
https://www.satpimps.co.uk/attachment.php?attachmentid=43544&stc=1&d=1277360069
comport on receiver is always D9 male pin
null modem cables are normally always D9 female crossed wired D9 female
Null Modem cable:
http://upload.wikimedia.org/wikipedia/commons/thumb/8/86/Null_modem_cable_1.jpg/220px-Null_modem_cable_1.jpg

so you would need: USB to serial converter null modem cable
maximum distance 5 meter/ 16.4 feet together, null modem wire diagram in attached thumbnails

[holmroad]

Eddie, I dont think you've said WHICH channels/package you are trying to open mate?:respect-055:

[gunner1960]

how can you get this to work with a tm5200 usb super anybody know

[Giga]

check in menu for option and serial mode if you have a patched firmware on it? if this possibility is there? set Serial Mode: sssp, baudrate: 115200

[shambo1966]

anyone know if jsc sport down? ok on canal sat fr. keep up the good work compass and thanks alot.

[pineapple jack]

I cannot get on 19E Canal Sat France on my Technomate 1500CI+


2010/06/24 17:18:19 7880 p04 proxy meolsat.ath.cx:20002 newcamd525 (fd=4)
2010/06/24 17:18:19 7752 s proxy started (pid=7856, server=meolsat.ath.cx)
2010/06/24 17:18:38 8172 c01 plain sssp-client 127.0.0.1 granted (tuner, au=0)

2010/06/24 17:18:43 7836 p08 connect(fd=4) failed: (errno=111)
2010/06/24 17:18:43 8172 c01 tuner (0500&032820/24B9/34:EE56): not open (1060
ms)

[pineapple jack]

Duplicate post.

[Weston Calling]

I'm following these instructions by Compass and Canal Sat is working fine on my TM1000ci.

using SSSP & Null Modem cable connected to receiver
Save & unpack the attachment

1. run CILQUER ICI
2. open folder SBCL_ vpulg
3. run SBCL v1.0i
4. check to see if vplug is active (ticked)

Weston Calling

[pineapple jack]

Many Thanks I didn't go to SBCL v1.1b folder and then click and open SBCL v1.b1.


Someone smack my botty. :beatdeadhorse5:

[eddieaok]

Eddie, I dont think you've said WHICH channels/package you are trying to open mate?:respect-055:

Sorry M8 Canal +1 West

[holmroad]

Sorry M8 Canal +1 West

Well I think we dont get ALL of C+ Nordic on 1W mate, just a few, e.g. 'Series', Sports ( SD & HD) Eurosport HD, BBC HD, - its more a trial of error to be honest - and the HD channels once opened usually only last a few minutes before freezing! I also usually make sure any cam is not inserted whilst watching too, as this can cause compatibilty probs with HD channels!
I find the JSC Sports 1-10 (13E) tend to open best mate!
Many C+ France channels open on 19E though too!:bravo-009:

[mynameisEarl]

Hello,

I've finally had a serious go at getting this to work, but as before with no success. I've read the brief instructions and various forum posts/threads but I have little idea of what I'm doing.

I am on Vista Home Premium and using:
ThemeX,JSC,13°E,C+france19E,Canal-Digital0.8°W,24-06-2010-_by_Compass.zip
and testing with JSC Sports 1 and 2.

Running CILQUER ICI.exe opens a DOS window which runs as far as:
4468 s serial: initialized (pid=4256, auto@/dev/ttyS0)
4556 p08 proxy 127.0.0.1:6001 newcamd525 (fd=4)

I've tried running SBCL v1.1b both before and after running CILQUER ICI.exe and selecting 'Active' in SBCL v1.1b's 'vPlug' dropdown selector.

This is CS requiring an internet connection isn't it? If so, my computer makes no attempt to connect through my firewall. I would get notified if it did.

Do we have to forward a port in the internet modem/router?

I have my TM set to SSSP and my pc COM port is COM2 which works fine with the Darkman Loader for uploading and downloading channel lists and softcams.
The cable however is quite long; is it possible that even though it works fine for softcams/channel lists, the length might not be suitable for this?
If so, would that mean that the TM would not 'request' an internet connection so the process just stops?

I cannot move my TM and pc closer and use a shorter cable.

Thanks for any informed help.

[joany]

Is this a daft question - What is the advantage of this setup over say a straight forward ethernet connection to stb.
Is anybody using a straight forward cs setup using 8281 and an internet connection to the stb?

[Giga]

Guessing: its more an addition for emu's not handled by TM-6900 like Viaccess above 2.5.
Mainly usage for C S in my case:
- local distribution of official card(s) to 2 TM-6900HD Super (can watch 2 programs on same card)
- not having to use official CI module (slow zapping)

[mynameisEarl]

It appears I have it working, after looking elsewhere on the internet for inspiration.

I had to go into mpcs.conf and change the following line:
Device=au://tuner@/dev/ttyS0
to
Device=au://tuner@/dev/ttyS1

I have no idea why 'ttyS1' means COM2 but it appears to.
I'm guessing the download package assumes we are all using COM1, which is already in use on my pc. I am using COM2 for the serial connection.
Can I suggest the instructions are improved to explain the use of this setting.

Also, can it please be clarified if what we are doing here is CS and therefore we are open to being tracked by our IP addresses.

[Giga]

I have no idea why 'ttyS1' means COM2 but it appears to.

ttyS0 = COM1
ttyS1 = COM2
ttyS2 = COM3
ttyS4 = COM4
tty: A generic term for any computer data terminal or associated serial interface


Also, can it please be clarified if what we are doing here is CS and therefore we are open to being tracked by our IP addresses.
Yes is C S

[gunner1960]

check in menu for option and serial mode if you have a patched firmware on it? if this possibility is there? set Serial Mode: sssp, baudrate: 115200

as my computer is upstairs and no where near my tv my other laptop has a rs232 9 pin attachment on it would i still need a usb to serial adaptor or could i just use a rs232 from laptop to tm reiceiver

[Giga]

if you have the rs232 on the laptop, that would do.

[mynameisEarl]

ttyS0 = COM1
ttyS1 = COM2
ttyS2 = COM3
ttyS4 = COM4
tty: A generic term for any computer data terminal or associated serial interface


Yes is C S
Thanks, Giga.
I'm pleased I finally got this working as a personal challenge.

[^^COMPASS^^]

27-06-2010

Updated
Jsc Sports +1 = +8 On Hotbird 11296 H 27500
JSC World Cup Hotbird 10815 H 27500
Jsc+9 => Jsc+10 Hotbird 10815 H 27500
JSC Sports HD + 3D, Hotbird 10815 H 27500 3/4

Get it from here: https://www.satpimps.co.uk/showthread.php?p=733019#post73301 9

[titus]

for this program is it a decent upload speed or download speed required.

[mynameisEarl]

Hello,

With Compass's releases yesterday and today, I have no problems with Theme-X but no luck opening any JSC Sports channels.

Can I assume then that my set up / cable length / timeouts are ok but the JSC servers are either dead or over loaded?

Thanks.

[Giga]

download/upload speed is not the essence. Response timings is all, these are showing in the DOS box below 1000 ms should give nearly no freezes.

@mynameisEarl,
there are limits what C S server can handle (users, network connection to it, same channel requests, ...) sometimes it works, other times it won't.

[titus]

is their anyway to change the response times as i can get theme x to work but when i try thor 0.8 the timings are up in the 7300 ms range and i just get timeout, or if if does open it only lasts for about 6 seconds before freezing again

[pineapple jack]

Does this work for any channels on 16E or is that another program ?

[Giga]

@titus: nothing you can change, or if you have the means to bring the server closer: it is the time needed for that signal to go to the server and come back.

@pineapple jack: works only for mentioned providers

[^^COMPASS^^]

30-06-2010

Updated
Jsc sports on Hotbird
ThemeX On Hotbird



Canal Sat France 19.2E Down!


Canal Digital Sweden on thor ok

Get it from Here : https://www.satpimps.co.uk/showthread.php?p=733694#post73369 4

[gibson]

Interesting thread this, but how do you change the Com Port from 1 to Com whatever?
I can see from a previous post that you go into Device etc, but where is Device for me to access and from what (PC, SBCL,?). Also, how do you switch on SSSP on the Tech 1500c is it by changing channels as possibly mentioned earlier? Don't seem to have this facility in the 1500 c Options Menu. Many thanks in anticipation and

Best wishes from,

Gibson.

[dodgybrook]

Interesting thread this, but how do you change the Com Port from 1 to Com whatever?
I can see from a previous post that you go into Device etc, but where is Device for me to access and from what (PC, SBCL,?). Also, how do you switch on SSSP on the Tech 1500c is it by changing channels as possibly mentioned earlier? Don't seem to have this facility in the 1500 c Options Menu. Many thanks in anticipation and

Best wishes from,

Gibson.
device is on ure pc go to control panel-system-hardware then change the port to 1

[^^COMPASS^^]

06-07-2010

Added Canal Digital NL 19.2E

Seca Channels



Jsc sports on Hotbird ok


Bulsat 39E ok via Vplug


ThemeX Have provider Problems again!

Get it from Here : https://www.satpimps.co.uk/showthread.php?p=734894#post73489 4

[joany]

06-07-2010

Added Canal Digital NL 19.2E

Seca Channels








Get it from Here : https://www.satpimps.co.uk/showthread.php?p=734894#post73489 4

not working for me this morning. Timeot.
It worked yesterday tho.

The server must be busy because it is reachable with a ping value of 82ms

[^^COMPASS^^]

not working for me this morning. Timeot.
It worked yesterday tho.

The server must be busy because it is reachable with a ping value of 82ms

:iagree:

Yes i noticed, I'm updating it as i speak :D

[holmroad]

Thanks Compass - latest one once more here updated to 7/7/10!

https://www.satpimps.co.uk/showthread.p...894#post734894

Once again you ARE a star mate!:respect-067:

[holmroad]

Just checked new file and C/Ned 19E working fine, as is Bulsat 39E, but JSC Sports & Theme X 13E & C+ Nordic 1W still not working as at 0945hrs BST!:respect-055:

[Weston Calling]

Thanks very much for this. I can confirm that the Dutch channels are working fine on my TM1000CI.

I must admit I find it a bit frustrating that I can't open ESPN America with this and that I have to revert to the ThemeX,JSC,13°E,C+france19E,Canal-Digital0.8°W,28-06-2010-_by_Compass to open this channel.

Weston Calling

[FOX]

The link above is not working. anyone can provide a valid link. Many thanks

[Giga]

last posting
https://www.satpimps.co.uk/showthread.php?t=135732

[charlie]

Was working fine yesterday now i got" portcom error",im using windows 7 checked settings in device manager im on comm1,any body else had this problem? I did have a go at getting Bullsat earlier in the V PLUG earlier would this hacve anything to do with it.

[Weston Calling]

Was working fine yesterday now i got" portcom error",im using windows 7 checked settings in device manager im on comm1,any body else had this problem? I did have a go at getting Bullsat earlier in the V PLUG earlier would this hacve anything to do with it.

It's working fine on my TM1000ci right now with XP. I guess you might have changed something when you tried vplug, but if you unzip the folder from scratch, I would think you'd be fine.

Weston Calling

[Disco Man]

Hi folks,
Just confirming that jsc works fine

thanks

[charlie]

Thanks for reply don,t think its Compass software, tried unistalling driver all ok in device manager sayingeverything working ok, i could have a conflict with another device in comm port 1, is there a way to check which device is on it?

[charlie]

JSC working fine with Compass upload dated 08/07/2010, think one of the family had not allowed access when prompted by the firewall so had to reconfigure my computer, also can i thank Giga for all his efforts as his posts was very helpfull also to Compass for all his hard work at deleivering these files

[Plessy]

Just to add my penny farthing to this thread,

For the First Time I tried this today and after a bit of cable testing and reading ,

Wow ! Fantastic! :respect-051:

Thanks Again Compass !:party:

And a lot easier to use than Diablo i.e (configuring):)

Watching Bullsat at the moment wonderful stuff...

Many Thanks !:cheers2:


Plessy

[limerick]

Hi
I have JSC working ok but cant get Bulsat to clear.


using SSSP & Null Modem cable connected to receiver
Save & unpack the attachment

1. run CILQUER ICI
2. open folder SBCL_ vpulg
3. run SBCL v1.0i
4. check to see if vplug is active (ticked)
I am doing as above but cant clear any scrambled channel .What channel's should I be able to clear?and what am I doing wrong,would appreciate any help.Below is what's shown in vplug 2.4.3 monitor

[19/07/2004 22:50:57] SBCL v1.0i:SBCL - StartECM_Filt-> $00FF
[19/07/2004 22:51:20] SBCL v1.0i:SBCL - EMM Pid =$0500, SID =$002E
[19/07/2004 22:51:20] SBCL v1.0i:SBCL - Timeout… This PID is empty. Rescan...
[19/07/2004 22:58:58] SBCL v1.0i:SBCL - AutoEmm: ProviderID,CurChCAID : 060400,0604
[19/07/2004 22:58:58] SBCL v1.0i:SBCL - EMM-CA: Standarized systems
[19/07/2004 22:58:58] SBCL v1.0i:SBCL - Unknown EMM structure
[19/07/2004 22:59:58] SBCL v1.0i:SBCL - EMM Pid =$0500, SID =$002E
[19/07/2004 22:59:58] SBCL v1.0i:SBCL - Timeout… This PID is empty. Rescan...

regards
limerick

[Giga]

KoS package:

http://en.*********.net/pack-bulsatcom.php

[gibson]

Is this method of clearing still working please. Thankyou and

Best wishes from,

Gibson.

[Garf]

Is this method of clearing still working please. Thankyou and

Best wishes from,

Gibson.

Just discovered this today so gave it a try. Working on TM1500CI+ using files in post 240. :hurray:

[gibson]

So it is Garf, thankyou.

Best wishes from,

Gibson.