ground stand

[mister-t]

ok all,im looking for a ground stand its to hold a 1.2 mtr dish and motor
ive checked the sponsors site but they dont stock any,so any help much appreciated
mister-t

[lennono]

ask your local ironmonger to make you one,mine cost me £90 and that was for a 1.8m channel master.

[Gerry55]

Hi mister-t
The best way is a lenth of steel pipe 76mm if its a Channel Master, a three foot deep hole and 3 or 4 bags of Postcrete.

[seti]

If you in Gwent area then i have a solid ground stand of a 2.2m prime focus dish (dish gone) was going to weigh it in with the scrap from work, but it to good for that.
If you or anyone can collect it, then you welcome to have it free

(but only if you use it not for scrap)

Had to get it out of the way, so sadley it now gone for scrap.

[mister-t]

If you in Gwent area then i have a solid ground stand of a 2.2m prime focus dish (dish gone) was going to weigh it in with the scrap from work, but it to good for that.
If you or anyone can collect it, then you welcome to have it free

(but only if you use it not for scrap)

thanks for the offer but sadley to far from me
mister-t