View Full Version : Brown Tint in New Elite image ???
dreambox17
05-05-2010, 11:20 AM
Hi
Just installed the new Nabilosat Elite Bh103 image and i have noticed a brown tint.. I have tried altering all the colour settings on my pioneer tv but i cannot get it right, The effect is similar to the coloured in b & w movies. yet when i put the old image back the colours go correct. I know this sounds impossible as i believe they use the dm video drivers, but there is something strange here.
Has anyone noticed this?
The picture is watchable just has a brown tint e.g. lacking in blue content and it doesn't matter how you adjust the tint controls, it is not right
Any idea what is wrong here?
echelon
05-05-2010, 11:52 AM
is this on hdmi or scart ?
and what av settings have you got at the moment ?
dreambox17
05-05-2010, 12:15 PM
on hdmi 1080i
it appears to be lacking in blue content i had the same effect when i put an enigma 2 image in a kathrein 910 and when i put the original image back all was well
you can adjust the rgb controls on my pioneer but the blue has to be adjusted to near full to get near to normal pic but this is still not as good as the old image
very strange i also noticed someone on another board saying something similar
sonic1
05-05-2010, 12:18 PM
Nothing like that at all with my image / setup
Can you provide a screen shot ?
dreambox17
05-05-2010, 01:26 PM
hi sonic
i will try to get a pic but its just the same as turning down the blue drive on your tv its a brown/orange effect
shame as the image itself is perfect and i have a usb tv stick for it
but the quality of the pic is what matters so i will be forced to go back to the old one
i would of thought the vid drivers were all the same on the images
thx
sonic1
05-05-2010, 02:39 PM
It does not make sense to be honest, there is nothing within the image that can cause this.
On Dream Elite board I have not read a single report of this problem.
What is odd is you say you had a simliar problem with your kathrein 910.
Have you tried a different lead or maybe tested on someone elses TV ?
dreambox17
05-05-2010, 07:30 PM
ok
i know it does not add up that's why i posted this problem
cant think what it could be but why should one image be fine
i cant see it being a hardware fault as this would be on both images
this is the strangest problem iv had to date
as for the kathrein this was a known problem with enigma 2 video drivers
thats why most people used the original hacked images instead of the enigma 2
thx anyway
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.