View Full Version : dm800
cordinn
18-05-2010, 05:54 PM
hi can ayone help please, i have tried flashing my dm800when i disconnect the power cable and hold button in when power back up. i get the message stop and it wont give me an ip to get in box, just get dchp up above stop and nothing else.
is there anyway of getting round this, the internet connection is fine
ps it wont even boot so i can get in box
dcselec
18-05-2010, 06:16 PM
Just power up normally dont hold anything
in it should start ok
Dave
cordinn
18-05-2010, 06:23 PM
tried that no good wont reboot
Keano
18-05-2010, 08:11 PM
m8 try and use dreamup and cable.
dcselec
18-05-2010, 08:36 PM
m8 try and use dreamup and cable.
Yes thats the next option hope you got a cable
not like me stuffed it up and had to wait 3 days
for cable from ****
Dave
paul01609
18-05-2010, 08:44 PM
is dhcp turned on in the router and box?
keith0509
18-05-2010, 09:02 PM
Before you try to reboot the db800 you must make sure that you have disconnected all usb devices. Have you tried it without any devices connected.
sonic1
18-05-2010, 09:06 PM
Remove everything except lan cable. take top off and disconnect HDD if fitted and at the same time press the tuner into it's fixing.
This is a common problem that will lock the box up.
Now try and flash again.
cordinn
19-05-2010, 05:17 AM
sorted thamks again for the info lads
sonic1
19-05-2010, 08:16 AM
sorted thamks again for the info lads
What was the problem ?
cordinn
19-05-2010, 04:43 PM
null lead mate, used a different one all ok
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.