AZEPGMGR with 0.9.4923

[happyhammer]

anyone else having problems with azepgmgr and the latest firmware?



AZBox[bin]$ ./azboxepg -v -v -v
_azepgmgr ver 1.6 subtitle info patch
unlink fail!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!: No such file or directory
ERROR: ChannelSDK_Load:354 mismatch version(10,9) Fail to read the channel_list to '/DISK2/all_channel.dat'
Caught signal 11 - cleaning up ...
Loaded 0 events
Caught signal 1

[tapper]

same for me

Loaded 0 events
Caught signal 11 - cleaning up ...
Loaded 0 events
Caught signal 11 - cleaning up ...
Loaded 0 events
Caught signal 11 - cleaning up ...
Segmentation fault
End xml extract at Sat Jun 12 16:07:18 2010
Display mode: FND

[Smudger]

I'll test this tomorrow I've loaded the epg twice since loading this firmware. without problems. Since I done a fress install I'm now having problems.

[bpmurray]

The firmware complains about the channels version: it apparently gets v9 and wants v10. I can't see if this is due to the channels stored on disk, or if it's something to do with the update libraries. I've rebuilt it with the new libraries in the firmware, but that doesn't help.

I'll try to fix it today, but my guess is it'll be after I get some response from the azbox.com forum.

[balastruka]

Hi

No news??

Tested new version 1.7 and same error...



AZBox[newEPG_1.7]$ ./azboxepg -l -s 20100601 -d 5 -o 3600 &
1173
AZBox[newEPG_1.7]$ Archive: rytec.sources.xml.20100601.zip
_azepgmgr ver 1.6 subtitle info patch
unlink fail!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!: No such file or directory
ERROR: ChannelSDK_Load:354 mismatch version(10,9) Fail to read the channel_list
################################# ################################# ##############
[AZBoxTVSDK] die(1207): signal 11 during cleanup, exiting unclean!
[AZBoxTVSDK] DATE : Thu Jun 24 10:16:39 2010
################################# ################################# ##############
################################# ################################# ##############
[AZBoxTVSDK] die : caught signal 11, cleaning up...
################################# ################################# ##############
: command not found3:

BR

[hfmls]

same here, latest firmware 5006

[aoryx]

try KGDs fw
or try latest with 1.6a

[gtg60]

EPG works perfectly with latest firmware (5006) and 1.6a

[hfmls]

i prefer to use priority manager instead of KGD.

i'l try 1.6a
can u guys give me the link please?

[hfmls]

ok i am using 1.6a and this happens:

AZBox[bin]$ ./azboxepg -d 3
_azepgmgr ver 1.6 subtitle info patch
unlink fail!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!: No such file or directory
ERROR: ChannelSDK_LoadNetwork:767 Fail to open '/DISK2/DVBC.dat'
ERROR: ChannelSDK_LoadNetwork:775 Fail to read networks from '/DISK2/DVBTa.da
ERROR: ChannelSDK_LoadNetwork:767 Fail to open '/DISK2/ISDBT.dat'
ERROR: ChannelSDK_LoadNetwork:767 Fail to open '/DISK2/ATSC.dat'
Caught signal 11 - cleaning up ...
Loaded 0 events
AZBox[bin]$

[happyhammer]

try dos2unix on any files you changed

[hfmls]

unfortunately, same thing.
do u guys use firmware 5006 too?

can u guys post your configs in a .zip file please? cuz i really can't run this.
it shows a lot of cleanups.

[aoryx]

that happened to me with 5006
deleting channels then restoring it helped...

[hfmls]

ok gonna try that, thank you.