digi tv not workin

[tony52]

I've upgrade my TM6900HD super+ with the new softcam and Digitv clear for one minutes and then scrambles and if I repeat the operation still the same thing append :banghead:

[echelon]

tmsoftcam ok on my tm1500 m8

see if you can turn off the AU for digi tv and then reapply the tmsoftcam from yesterday

[holmroad]

Assume you loaded new patch 726P, followed by Add-On, followed by softcam - in THAT sequence mate?
If you didnt load new patch at all but only the softcam it should work fine, it does on MY TM6900HD Super at any rate - but please also note what Echelon said regards the AU setting etc too!:respect-050:

[tony52]

tmsoftcam ok on my tm1500 m8

see if you can turn off the AU for digi tv and then reapply the tmsoftcam from yesterday

thanks m8, I've done that and still the same problem

[tony52]

Assume you loaded new patch 726P, followed by Add-On, followed by softcam - in THAT sequence mate?
If you didnt load new patch at all but only the softcam it should work fine, it does on MY TM6900HD Super at any rate - but please also note what Echelon said regards the AU setting etc too!:respect-050:

thanks m8, I'm running the new patch 726p, and i've the add-on, and i've followed the sequence you have described but no joy, :confused:

[holmroad]

Which softcam are we discussing here mate - as there was another DigiTv keychange yesterday (14/6) '00' - so is this definately the one you are using?:respect-069:

[Giga]

softcam loaded:
725p + last Add-on with last Softcam = OK
726p with last Softcam = OK
726p + last Add-on with last Softcam = NOT OK
726p + last Add-on with last reloaded Softcam = Not OK, freezes after some minutes and key is gone!

7.26p:
France 3 problem still there on 19.2°E keeps rebooting when selected
France 3 on 23.5°E = Opens 11635 V 28500

[Giga]

It is longer then a minute before the channels freezes and scrambled?
Reverting to 7.25p + Last Add-on + reloading softcam = not ok = freezes

[Giga]

Reloading 7.25p then softcam and not the Add-on seems to be working

[tony52]

Which softcam are we discussing here mate - as there was another DigiTv keychange yesterday (14/6) '00' - so is this definately the one you are using?:respect-069:
I'm using, yesterday (14/6) '00'. I've reloaded the new patch 726p with add-on and the sofcam still a problem

[echelon]

I'm using, yesterday (14/6) '00'. I've reloaded the new patch 726p with add-on and the sofcam still a problem

so go back to the previous patch like giga said

[tony52]

softcam loaded:
725p + last Add-on with last Softcam = OK
726p with last Softcam = OK
726p + last Add-on with last Softcam = NOT OK
726p + last Add-on with last reloaded Softcam = Not OK, freezes after some minutes and key is gone!

7.26p:
France 3 problem still there on 19.2°E keeps rebooting when selected
France 3 on 23.5°E = Opens 11635 V 28500

I've inserted a dragon cam with the new key(on the dragon) and digi works ok with the 726p. but the problem is that France BISS not working on 13E, and 23.5E. but working on 19.2E. :confused: if i take the dragon cam off France BISS working ok on all 3 satellites. but digi freezes

[tony52]

so go back to the previous patch like giga said
thanks m8, but i will keep the dragon cam inserted with the 726p and i can have digi. and france Biss on 19.2E

[holmroad]

Well I've just added the LATEST (00) softcam for DigiTv 00 key update from yesterday(14/6) - on top of the 726P patch + Add-On - and DigiTv has been on ok for 10mins now - AU has been set to 'off' for months anyhow (just checked it still is!) so from MY point of view I have NO probs with the 726P patch/softcam DigiTv update - so far!
Weird eh?:respect-050:

[Giga]

I've inserted a dragon cam with the new key(on the dragon) and digi works ok with the 726p. but the problem is that France BISS not working on 13E, and 23.5E. but working on 19.2E. :confused: if i take the dragon cam off France BISS working ok on all 3 satellites. but digi freezes
does sometimes happen: cams fighting to decrypt, don't know about dragon cam if you can take Biss keys out?
or switch patch of while using dragon?
Main Menu: System Information: on remote 2 0 0 4 menu for CAS and BISS should disappear, same to switch on again.
or if you have a permanent usb key for the technomate? work with 2 softcams one without keys:
https://www.satpimps.co.uk/showpost.php?p=660207&postcount=1 and the last one you downloaded. keys load very fast and switch between empty keys and recent keys when needed.

[holmroad]

Well here's a mystery, after 20mins as described above (726P/Add-on/softcam), DigiTv (Nova Sport) went off, so reloaded 725P/Add-on/00 softcam - failed after 30secs - so wonder if there's been yet another keychange?:woohoo-022:

[Giga]

weird indeed? maybe something to do with official seca card in card reader? will test some more: so 7.26p + last add-on? + last softcam uploaded by ^^COMPASS^^

[grin2]

has anyone got digi tv working on 6800hd non super. read through above threads but patches seem to be around 690 ish on non super. presume 726 ish is for super models. tried softcams and au off to no avail.

[holmroad]

Sorry Giga mate, but you've lost me, there is NO Seca card in ANY card reader in MY set up - unless maybe you are confusing me with someone else's set up?
I have my TM6900HD Super with the patches/softcams only - although I do have a white card (N*S though not Seca) in the cardreader - but no cam! :respect-069:

[tony52]

does sometimes happen: cams fighting to decrypt, don't know about dragon cam if you can take Biss keys out?
or switch patch of while using dragon?
Main Menu: System Information: on remote 2 0 0 4 menu for CAS and BISS should disappear, same to switch on again.
or if you have a permanent usb key for the technomate? work with 2 softcams one without keys:
https://www.satpimps.co.uk/showpost.php?p=660207&postcount=1 and the last one you downloaded. keys load very fast and switch between empty keys and recent keys when needed.
thanks m8, i will use 2004 wen needed, I beleve phant0m is coming out with new patch soon to fix the problem for France BISS on 19.2E

[tony52]

does sometimes happen: cams fighting to decrypt, don't know about dragon cam if you can take Biss keys out?
or switch patch of while using dragon?
Main Menu: System Information: on remote 2 0 0 4 menu for CAS and BISS should disappear, same to switch on again.
or if you have a permanent usb key for the technomate? work with 2 softcams one without keys:
https://www.satpimps.co.uk/showpost.php?p=660207&postcount=1 and the last one you downloaded. keys load very fast and switch between empty keys and recent keys when needed.


Well here's a mystery, after 20mins as described above (726P/Add-on/softcam), DigiTv (Nova Sport) went off, so reloaded 725P/Add-on/00 softcam - failed after 30secs - so wonder if there's been yet another keychange?:woohoo-022:
don't think is a key change because the 00 key work OK on the dragon cam, most probably is a problem with the 726p patch.

[holmroad]

Looks as if I may have been a little premature with all my 'ramblings' guys, as I now think Nova Sport had gone off for a while ANYWAY - so now back to 726P/Add-onn/softcam but on Eurosport 2 live rugby and its all fine again!
So sorry for maybe 'jumping the gun'!:king-042:

(Addendum:- Still working with patch 726P/Add-On/latest softcam (DigiTv 00 key one) after well over an hour!)

[Giga]

referring to my setup and testing, as action star froze after some minutes and digi was all scrambled and would not open after.

[Giga]

6800HD: if patch from 11-06-2010 is not opening digi, try patch 692p

[^^COMPASS^^]

I've inserted a dragon cam with the new key(on the dragon) and digi works ok with the 726p. but the problem is that France BISS not working on 13E, and 23.5E. but working on 19.2E. :confused: if i take the dragon cam off France BISS working ok on all 3 satellites. but digi freezes

Ok this might help

You can use Predator 3.25 for Digi Tv (you can find this in the Dragon Cam Files section both myself and EMPB keep the digi keys updated, it should be ok with you Patched TM

Regards...

[techmate]

has anyone got digi tv working on 6800hd non super. read through above threads but patches seem to be around 690 ish on non super. presume 726 ish is for super models. tried softcams and au off to no avail.

no, doesnt work on tm6800/6900 hd standard. i use a cam for digi,

[tony52]

Ok this might help

You can use Predator 3.25 for Digi Tv (you can find this in the Dragon Cam Files section both myself and EMPB keep the digi keys updated, it should be ok with you Patched TM

Regards...
thanks m8, i've loaded (COMPASS-PREDATOR3.80BISS-DCWFILES14-06-2010) and digitv work ok:applause-003:

[tony52]

today new softcam upgrade from glen digitv 01 key, as cured the problem i ad with freezing. still working after 10 minutes, only problem RAI not working now:respect-010:

[tony52]

thanks compass, for your latest softcam (16-6-2010) no more freezing on digitv and RAI works ok