800 hd clone and darkmotor?

[wwe]

I have installed my clone 800 hd and darkmotor. Bit i can't seem to fix on anything west i.e. 1w 7w and 30 west. I am in Spain so these are all achievable.

I have locked onto 19.2, and 13 and the dish moves freely to these.

i am using nabilosat v12 and have tried GP2, and blackhole elite. I am using catseye channel list.

The motor will not move west at all, i have remade all the plug ends, and changed the LNB

any ideas please help been on it for ages

wwe

[harshy]

Hello wwe

Is it using USALS, or stored motorised positions? , are the satellites activated in the tuner setup?

[wwe]

i have tried both usals and stored and a mixture of both. and yes the tuner is activated on all sats

[harshy]

strange why it won't move, i admit i did have some problems with nabilo where sometimes the dish refused to move, have you tried going to a west satellite that's nearest and then selecting the furthest you can get?

[wwe]

hi harshy,

yes i have tried that, i am goinng to reflash db and reset dish check all connections again, change lnb and see what happens

cheers

mate

[harshy]

Hello wwe

No probs wwe, and good luck :)


harshy

[king1313]

see if this help m8 worked fine for me
DREAMBOX DM800HD MOTOR SETUP
Hi i have Gemeni image install in my box.here is some information how to setup ur box with motorized dish (diseqc 1.2)
First Go to:

Menu--------->Setup------>service searching--->tuner configuration--->Advanced

then choose any setllite you want example we select Hotbird 13 east

Advanced---->hotbird

LNB--->1

USE USALS---->NO

Store --->001

diseqc----->1.2

-----------------------------------
only change these setting pls dont change any other setting then press ok then exit

same you can did other setllites setting but everytime you add other setllite please select LNB2 AND Store :002 and if you add more settllites pls give them LNB3....AND store :3

then go to Positioner Tuner setup

MENU--->-->Setup------>service searching-->Tuner positioner---->Tuner-
-
select setllite Example

Tuner positioner---->Tuner--Astra 19east

store postion---->1

then move your your dish east by pressing green button when you get astra signal and say locaked just press green button to store setting.then exit

Now search your astra 19 east by Manual scan and do the same for other setllites just Change store number 1.2.3.4.5. remember all setllites store with different numbers hope this method will work for you.

[wwe]

see if this help m8 worked fine for me
DREAMBOX DM800HD MOTOR SETUP
Hi i have Gemeni image install in my box.here is some information how to setup ur box with motorized dish (diseqc 1.2)
First Go to:

Menu--------->Setup------>service searching--->tuner configuration--->Advanced

then choose any setllite you want example we select Hotbird 13 east

Advanced---->hotbird

LNB--->1

USE USALS---->NO

Store --->001

diseqc----->1.2

-----------------------------------
only change these setting pls dont change any other setting then press ok then exit

same you can did other setllites setting but everytime you add other setllite please select LNB2 AND Store :002 and if you add more settllites pls give them LNB3....AND store :3

then go to Positioner Tuner setup

MENU--->-->Setup------>service searching-->Tuner positioner---->Tuner-
-
select setllite Example

Tuner positioner---->Tuner--Astra 19east

store postion---->1

then move your your dish east by pressing green button when you get astra signal and say locaked just press green button to store setting.then exit

Now search your astra 19 east by Manual scan and do the same for other setllites just Change store number 1.2.3.4.5. remember all setllites store with different numbers hope this method will work for you.

hi mate that's the way i have been doing it but because i have a motor dish i have been saying every sat is on lnb 1 and saving them in different settings i.e. position 1 then 2 then 3 etc... but all on lnb 1.

I will give this new way a try

cheers

wwe

[king1313]

yes mine dark motor i did as above post worked great
saveing them all at lnb 1 rong, position 1 lnb 1, position 2 lnb 2,position 3 lnb 3 and so on sould work fine let us know how you get on

[wwe]

yes mine dark motor i did as above post worked great
saveing them all at lnb 1 rong, position 1 lnb 1, position 2 lnb 2,position 3 lnb 3 and so on sould work fine let us know how you get on

cheers mate i will its too hot now to go on roof as i am in Spain

wwe