CT 5000 latest firmware

[jaydee]

Hi Glen911, can you help if possible and post the latest Patch for this model. My is showing 181p from January , i have noticed from other sites thro, GOOGLE the latest is the 194..Thanks.

[^^COMPASS^^]

Here is 194p

https://www.satpimps.co.uk/showthread.php?p=732728#post73272 8

[Smash]

Can you confirm if this is the right patch for my CT HD5000C plus

Many thanks in advance.

[Glenn_911]

Can you confirm if this is the right patch for my CT HD5000C plus

Many thanks in advance.


Yes i can confirm :respect-051:


Glenn_911

[super34]

Can you confirm if this is the right patch for my CT HD5000C plus

Many thanks in advance.

No, it is not the right one, for the Plus version you need the CTECH5000CPlus_228p.

Super34

[Glenn_911]

No, it is not the right one, for the Plus version you need the CTECH5000CPlus_228p.

Super34


He ask for the Patch version by the way the 228 FW is old for the new one 230p

Here: https://www.satpimps.co.uk/showthread.php?t=135527

[Micko50]

Hi Glenn,
is there anything newer for my receiver?

At present I have 120p installed (dated April 7th).

Thanks, Micko50.

[Glenn_911]

Hi Glenn,
is there anything newer for my receiver?

At present I have 120p installed (dated April 7th).

Thanks, Micko50.


Yes i have something for you Micko50


Here: https://www.satpimps.co.uk/showthread.php?t=135531

[Micko50]

Thank you very much Glenn.

EDIT:- Glenn, I have a question. Is there a 'P' version, i.e. 1.28p so that I can load your softcams into the receiver?

[ceyer]

@Glenn-911

is it save to use this Version on a CT 5000 HD + as it ist mainly for the F16??

Does the remote work properly??

Are Visat chls on .48E cleared??

[Glenn_911]

@Glenn-911

is it save to use this Version on a CT 5000 HD + as it ist mainly for the F16??

Does the remote work properly??

Are Visat chls on .48E cleared??


ceyer

I really do not know but please be very, very careful

[Glenn_911]

Micko50

Why don't you use a USB stick like i do, the CTeck HD 5100C have a USB Input it takes only 2 sec and all active keys are insite, thats all and ........ no more problems with cams

Glenn_911

[Micko50]

Hello again Glenn, I do use a USB stick. I downloaded your original software 1.28, unzipped to a stick and loaded it into my receiver.

I then went to the data transfer menu but it didn't show your latest softcam file (which I had on my stick).

If I could've seen the file I would've loaded it as I usually do when I update the receiver's softcam.

OK, what I did next was have a good search around the net and managed to find the 1.28p file which I could download without joining another forum.

I loaded it into the box and then the new 1.28p allowed me to load your softcam. I haven't had a real CAM for ages now. I prefer emu software.

Am I doing somethign wrong when I can't see your 'softcams' on my stick when the firmware doesn't have a 'p' (patched) at the end of its name?

Best regards, Micko50.

Edit:- I put the 1.28 unpatched (original) version back in the box. I couldn't see the softcam on the stick. Reloaded the 1.28p and could see the softcam again.

[Glenn_911]

Micko50

1) First step open a new folder > Softcams < in your USB stick, now download the Winrar Zipper and open him on Topdesk.
2) Download keyfile and put him in your USB stick (to your softcam folder)
3) Put USB stick insite the Input of your Box
4) Open menu and go to USB <=> Date Transfer <=> Softcam folder <=> key softcam push OK on remote

Thats all only 2 seconds and your Box is Up To Date with the latest active keys.


Wish you luck


Glenn_911

[Micko50]

Thanks, I'll give that a try.

[Glenn_911]

Thanks, I'll give that a try.


Micko50


I know you can make it, don't give Up it's so easy


Take care


Glenn_911 :respect-055:

[bobbyboil]

am i right in thinking i can use 194p on my hd5000c?