tm-6900 hd combo super+

[batalur]

Hi I have conected the RF modulator at the rear of the machine to a distribution amp. (slx8l) with no joy. has anyone had sucsess, if so what equipment, thanks

[Les Hobbs]

Hi,what you do is to take the rf output from the TM,to the input of your TV amp,then you go to each TV connected to the amp and retune to pickup the new signal from the TM,if you get freq lines on the new TM channel go into the TM set-up menu and move the TM freq output to a higher or lower position and then retune all the TVs job done.

[Giga]

you have 2 uhf outputs, the one next to the F-connectors is only loop through for arial or cable tv. use the middle one for out put of sat channel to TV amp if you wan to output sat channel, if that is your question
Take a look here (https://www.satpimps.co.uk/showthread.php?t=122957) <= click here

[batalur]

Hi, Thanks for all your help, and prompt reply. all is working well and feeding thro, now to run some more coax.

Many thanks again