726 phantom patch

[joany]

I have just received my null modem cable and are going to have a go with sssp.

Can somebody confirm if the new patch is loaded in 2 pieces like the old patches?

[Barney]

just load latest patch for your reciever then open Cliquer.exe application keep null modem cable attached to your reciever and sit back & enjoy .
It is looking like the only realistic way to clear channls at the moment and to be honest it dont need a genuis to figure it all out its pretty straight forward at least it was for me so i would advise just go with the flow and you'll have plenty of choice in tv once again .
-----------
Barneycarlton

[joany]

wont i need to set us sssp on my tm6900 first?

[grin2]

presume that means no one can use the internet whilst you are watching a channel on sat rec/tv, or does it mean just open another window. as you can see im not very technical. missus complains now if im watching a downloaded film on the tv as the pc and tv are tied up. just need to order a longer null modem.

[joany]

presume that means no one can use the internet whilst you are watching a channel on sat rec/tv, or does it mean just open another window. as you can see im not very technical. missus complains now if im watching a downloaded film on the tv as the pc and tv are tied up. just need to order a longer null modem.

The content is not displayed on your pc
the pc just unencrypts the signal for your stb

i would think the program will run in the background and wont affect the performance of the internet or pc

[Giga]

wont i need to set us sssp on my tm6900 first?
yes:sssp (https://www.satpimps.co.uk/showthread.php?t=135079) <= click here

[Giga]

presume that means no one can use the internet whilst you are watching a channel on sat rec/tv, or does it mean just open another window. as you can see im not very technical. missus complains now if im watching a downloaded film on the tv as the pc and tv are tied up. just need to order a longer null modem.
5 meter max distance
only small data is exchanged on internet, so other use should be possible if not using the full download capacity of your connection

[Hadziano]

Giga,i like your info on CS sssp etc...it just looks too much for me.Is there a simpler way of using SSSP on your receiver?i mean,not going into too much dificulty..

[Giga]

eh? you can drop filter, the rest is needed for sssp to function.
enable SSSP on the box
have program running on computer with serial connection on COM1
that should be it

[Hadziano]

but your internet has to be on right and connected to receiver?

[captainglassback]

Yes computer on and linked to internet all time that you are watching. Sorry to ****** thread. I connected my null lead and ran prog to my Technomate 1500 CI Super. I sensed that laptop and receiver were talking to each other. (I do know that null lead is fine). I did not clear any channs. There is no sssp option in the menu. (Receiver too old?). Had a look in my similar Clarke Tech 2100 plus and could not see an sssp option in there either. Any thought folks?

[Giga]

should work when you select a channel for that bouquet with patched firmware
check this thread and the last posting of it (#17 mark in vPlug)
https://www.satpimps.co.uk/showthread.php?t=135617

[techmate]

but your internet has to be on right and connected to receiver?

good point if using laptop will this work using wifi from lapy?

[Giga]

if your timings are OK: maybe. Wifi adds to delay, if to many freezes try with wire.

[techmate]

thanks that explains why wont work for me.
can only use wifi.
my internet is to far to connect lead.

[Giga]

cat5 could be approx 100 meter, other wise see if you can test HomePlug Powerline (ethernet over mains circuit)

[techmate]

thanks not possible to do that.
will give it a miss, shame
many thanks, Giga.

[joany]

Thanks to compass and giga.
sssp is now working on my tm6900hd super and I'm watching film 1.1 on 19e

jsc and theme x not working on 13 though.

any other packages open (with this) at the moment?

[Giga]

don't know about jsc, think you might missed this one:
https://www.satpimps.co.uk/showthread.php?t=135684

[holmroad]

Thanks to compass and giga.
sssp is now working on my tm6900hd super and I'm watching film 1.1 on 19e

jsc and theme x not working on 13 though.

any other packages open (with this) at the moment?

Yes mate, Bulsat on 39E opening too!:respect-050:

[KnockJohn]

This is brilliant - it also clears Canal Digitaal on 23.5

[UK2cyp]

This is brilliant - it also clears Canal Digitaal on 23.5

C Ned not working for me on 19e or 23.5e on tm 6900 combo standard
Wont login to server
B*lsat Ok

[KnockJohn]

I've had a few "Login Failed for user..." too but then it seems to sort itself out. I had one at 10:23 BST but OK now. Have another go.

[holmroad]

JSC Sport 1-10 etc 13E & Bulsat 39E working for me - but not C/Ned 19E or C+ Nordic 1W - plus understand Theme X 13E disappeared!:respect-055:

[UK2cyp]

Left on for 30 mins no C Ned
Be nice to get C Nordic back :bowing-036:

[UK2cyp]

Well as i wasnt looking it logged into c ned
You just have to wait:respect-040: