Enigma 2 by The_ripper - TEST -

[richy18]

I'm not sure how many people actually tested this version yet, but if anyone has, could he or she summarize the results on the primary topics:

- Reception TV SD (SAT, Cable, ...)
- Reception TV HD (SAT, Cable, ...)
- Decrypting (obviously not by using cardreader as this is not included yet)
- EPG
- Recording (Not yet possible I think)
- MediaPlayer (for different codecs)
- Subtitles
...

If someone didn't make it before I'll test it at three o'clock and will send a detailed report one or two hours later...

[antonis13]

Well I test the new version:

the new AzUp work fine in Win7
the audio fixed very good (only when change audio channel lost, but coming back if Ch+ , Ch- once)
media player dosn't play
stand by key work but don't wake up (not always)
Hdmi after few minutes close
Volume goes Down but not Up

[Abdul1508]

I walk to the following points:

. Zap rate is slightly diminished now sound is working
. From time to time give an error with the zapping
. Remote Control Regulation governs slower
. Sometimes distorts the sound to contain some stations
. Crasch enigma2 bij reset to factory
. bij choosing Defaul sevices list he also crasch
. Blue LED light remains on bij standbay
. I can not choose hard drive bij Media Player he dont sees him

that was my conclusion for now, it's still beta
Thanks for so far. :coolgleamA:

[kasukabe]

Tested new 1.0.0 RTi Core BETA Image.
Using a AzBox Elite. Using AzUP 1.2 on Win7 in Compatibility Mode (XP SP2).
No Greenscreen.

DVB-S Scan - OK
DVB-S2 Scan - OK
Moving Dish using DiSEqC 1.2 (Astra 19.2E , Astra 23.5E) - OK
Found 1938 services in total.
DVB-S Video - OK
DVB-S2 Video (incl. HD) - OK
CCcam - OK
Sound - seems to be OK, have to test it a longer time.
Standby - OK
Zapping speed is slower.

[rtificial]

OK, so the results so far are a bit mixed. At least great that there is big improvement in general. I'm just curious whether it turns out to be a version which is reasonably usable for day to day Sat TV watching and playing MKV's.

[stevie1961]

Firstly, thanks for new firmware.
these are the bugs.

No audio on some SD channels.
No audio on some HD channels.
When changing channels, sometimes only the audio changes and picture sticks on old channel.
Cccam works fine with 35 peers.
Sometimes crashes when zapping through channels.
Mediaplayer finds files on usb memory stick but fails to play them (mkv and avi)
UK EPG seems ok

Not in anyway moaning about these, just thought I'd highlight them for the team.
Excellent work guys.

[eppie]

[QUOTE=chataloff;768997]http://fire.filibe.net/mirror/img_0644.jpg
Install pass OK


I have tried to factory rest expressed before,to clean all settings loaded, but he keeps rebooting every time and crasch. I uploaded it again.

is your box connected with internet ?
i had the same problem i believe the plugin subtittle player needs internet ,no internet is a crash !

[stevie1961]

OK, so the results so far are a bit mixed. At least great that there is big improvement in general. I'm just curious whether it turns out to be a version which is reasonably usable for day to day Sat TV watching and playing MKV's.

It's not very far off, getting there:applause-003:

[crawley]

OK, so the results so far are a bit mixed. At least great that there is big improvement in general. I'm just curious whether it turns out to be a version which is reasonably usable for day to day Sat TV watching and playing MKV's.

It's only just the first beta version so no.It's going to take time to make it stable but we're in no rush.The team have done a great job even to get it to run! Patience is a virtue. :)

[rtificial]

It's only just the first beta version so no.It's going to take time to make it stable but we're in no rush.The team have done a great job even to get it to run! Patience is a virtue. :)

Absolutely true, and patience I have :)

The progress looks very promising indeed :respect-055:

[Blackie]

[QUOTE=@telesat;768993]AzUP v1.2


** Better safety while flashing Enigma 2 and new kernel versions

** Changed a way how Enigma 2 files are transferred to a AzBox HD device

** Possibility to install Enigma 2 on USB ( It install on same USB where patch.bin file is located, so there is no need to use 2 USB :) ), and HDD.

** Fixed problem with memory space on USB ( before approx. ~50MB was needed for extracting of Image, now is not problem )

** If You install on HDD, You can turn off Format of extended partition, and Your data on HDD will stay untouched !!!

** You can Turn OFF option copy kernel, if kernel in current version is not changed

** We suggest that KERNEL is always changed, and don't touch this when You are updating to the FIRST BETA version of Enigma 2 for AzBox.

** Added DHCP Server, which will lease IP address in same range where is IP address of Your PC, ofcourse if on Your network there is not existing DHCP Server, this will help that Your AzBox HD get valid IP Address when he is in Rescue mode.

** You can list all devices which You have on network and by that way to get which IP address is from AzBox HD.

** Find IP in LAN

** For AzBox HD Ultra, model without VFD , easiest way is to use crossover cable , so directly to connect Your PC/Laptop with AzBox Ultra HD without using LAN, and with that You will be sure that DHCP which is running with AzUP will lease IP address to Your device , and You can list it by clicking on DCHP IP ?

Thank you so much for your effort :respect-044:

I'm not sure that I understand it correctly, please confirm this to me. Is it possible to install Enigma to USB flashdisk and leave original firmware operational from DOM, or part of DOM is always rewritten and original fw. must be flashed again?
I'd like to test the beta but I don't know whether there is a safe way to update.

[[0_o]]

Hi. And how is about VFD? Is working all ok?? Anybody tested it?

Thank you.

[ebro]

I'm confused now. So Opensat helped with this version, which is great. I guess a few appolgese are in order from some that have slagged them off over the last few months. Does that mean they are not working on their own development and E2 is the only show in town.?

[bevste]

VFD isworking ok
Standby works when closing but dont come back on well, have to reboot!
Volume up does not work keymap fix would be nice please!
Had very little trouble with sound or picture stability
RCU is a little less responsive!
Unfortunately media player still not working and obviously recording not implimented yet!
cccam works well
Had no trouble doing firmware update!
Overall a big step in the right direction
Nice job guys!:respect-040:

[[0_o]]

VFD isworking ok
Standby works when closing but dont come back on well, have to reboot!
Volume up does not work keymap fix would be nice please!
Had very little trouble with sound or picture stability
RCU is a little less responsive!
Unfortunately media player still not working and obviously recording not implimented yet!
cccam works well
Had no trouble doing firmware update!
Overall a big step in the right direction
Nice job guys!:respect-040:

Thank you! :)
Still about VFD, can now shows all letters correctly? I mean if show leters like "ç" or "à", etc... I remember that in official fw, if a channel had a name like "Caça" then shows: "Ca*a"


Thanks

[T0rca1950]

VFD isworking ok
Standby works when closing but dont come back on well, have to reboot!
Volume up does not work keymap fix would be nice please!
Had very little trouble with sound or picture stability
RCU is a little less responsive!
Unfortunately media player still not working and obviously recording not implimented yet!
cccam works well
Had no trouble doing firmware update!
Overall a big step in the right direction
Nice job guys!:respect-040:

I would add just one more thing to this, clock isn't working the right way, it goes still to fast.

[Smudger]

I'm confused now. So Opensat helped with this version, which is great. I guess a few appolgese are in order from some that have slagged them off over the last few months. Does that mean they are not working on their own development and E2 is the only show in town.?

Where does it state this?

[ilcalmo]

Setting up HDMI at 1080p50 in /etc/init.d/bootup, causes HDMI signal loss after more or less of 15min watching HD channels. Zapping works, channel name shown on VFD, but no signal on HDMI. Have to reboot the AZ.

Setting it up at 720p50 looks to be regular.

So for me a new bug now not present before. 720p works, 1080p is not working anymore....

My box is premium.

Regards.

[kasukabe]

Setting up HDMI at 1080p50 in /etc/init.d/bootup, causes HDMI signal loss after more or less of 15min watching HD channels. Zapping works, channel name shown on VFD, but no signal on HDMI. Have to reboot the AZ.

I can confirm this. After a few minutes, TV lose Signal. Then I tried it using SCART, but there the Sync Impulse is missing.
I will try to go back to 720p.. hope it works.

[freeman01]

VFD isworking ok
Standby works when closing but dont come back on well, have to reboot!
Volume up does not work keymap fix would be nice please!
Had very little trouble with sound or picture stability
RCU is a little less responsive!
Unfortunately media player still not working and obviously recording not implimented yet!
cccam works well
Had no trouble doing firmware update!
Overall a big step in the right direction
Nice job guys!:respect-040:

Hi
How did you manage cccam to work please ?


Tnx

[MickeySa]

I'm not sure how many people actually tested this version yet, but if anyone has, could he or she summarize the results on the primary topics:

- Reception TV SD (SAT, Cable, ...)
- Reception TV HD (SAT, Cable, ...)
- Decrypting (obviously not by using cardreader as this is not included yet)
- EPG
- Recording (Not yet possible I think)
- MediaPlayer (for different codecs)
- Subtitles
...

You should read better this thread and You would know more.

I hope that You can fix for us Cable and DVB-T. Thank You very much, I am happy :)

When we can expect release of DVB-T and DVB-C working from You ?

[jkont]

Error messages on green picture here (AZBox Elite) !

[rtificial]

You should read better this thread and You would know more.

I hope that You can fix for us Cable and DVB-T. Thank You very much, I am happy :)

When we can expect release of DVB-T and DVB-C working from You ?

Hi MickeySa,

This was in no way intended as criticism or pressure. There is no reason why I should do so, I don't even have DVB-T / DVB-C tuners. I was expressing my curiosity for the experiences of others.

Actually I do read this thread and all posts, and probably had a short term memory problem regarding the tuner-drivers which had been implemented already. I remember now that this was all variants of DVB-S2 tuners for Elite, Premium, Premium+, Ultra, etc...

Anyway, I'm sorry you somehow have seen my questions as criticism. I appreciate your efforts and even more your results.

[ebro]

@Smudger "Where does it state this?"

Direct from MickeySA "WE WOULD LIKE TO SAY THANKS TO OPENSAT WHICH WAS INVOLVED TO PUT ALL EFFORTS TO SUPPORT AND COOPERATE ON THIS PROJECT"

[MickeySa]

@ebro

It is statement of team written in release notes !

[vikino]

I can confirm this. After a few minutes, TV lose Signal. Then I tried it using SCART, but there the Sync Impulse is missing.
I will try to go back to 720p.. hope it works.
720p works better without outage.
1080p while useless - also after 10-15 min. outage

[bevste]

Hi
How did you manage cccam to work please ?


Tnx

Read post #1460 in this thread all will be explained!

[kooleracer]

tested it today:

Sound and picture are in sync.
Sound no sound error, sometimes sound is not found but this is not common.
CCcam 2.2.0/1 / 2.1.4 working, but not as stable 'screws locks the system up'
Diseqc working with a1.2.3 and HB.
CrossEPG not working, cant be sure if it's xml data or sat data.
DVB subs not working.

Bugs:
remote does 2 commands instead of one when trying to select a audio track.
Sometimes the 'screws of death' pops up. Reboot or telnet killall enigma2 works.
Image is acting like it have Framedrops.
No sound on BBC HD and BBC one HD and more channels on 28.2 astra.

[hfmls]

CrossEPG using xmltv ZON/MEO not working ... i auto reboot, schedule epg download, manual download and reboot, and nothing..
Am i doing anything wrong?

kooleracer what were your steps?

[paulobr]

For me the important thing that maters now is the media player the epg in what button i press to see? and the clock who the timezone is select but the hour is not ok.
A big thanks to the ripper and the rest of the guys

[[0_o]]

How are CrossEPG working? Like a enigma2 dreambox?? Or use internet to download EPG??
I remember, for ZON many receivers get EPG for several days.

[hfmls]

when i mean epg..i mean in front of each channel..not showing for me :|
i once managed to see in 4 or 5 channels..but nothing more..

[vizes111]

tested it today:

Sound and picture are in sync.
Sound no sound error, sometimes sound is not found but this is not common.
CCcam 2.2.0 working.
Diseqc working with a1.2.3 and HB.
CrossEPG working, but not 100% see no date in multi epg mode.
DVB subs not working.

Bugs:
remote does 2 commands instead of one when trying to select a audio track.
Sometimes the 'screws of death' pops up. Reboot or telnet killall enigma2 works.
Image is acting like it have Framedrops.

how cccam is needed 2.2.0?

[kooleracer]

CrossEPG using xmltv ZON/MEO not working ... i auto reboot, schedule epg download, manual download and reboot, and nothing..
Am i doing anything wrong?

kooleracer what were your steps?

have configured witch EPG data you want?

I only see epg data in de underbar, but not in multiepg mode so i'm not quite sure if its xmltv data or just sat data epg.

[hfmls]

why don't u guys use 2.2.1 ? it fixs bugs.

[hfmls]

have configured witch EPG data you want?

I only see epg data in de underbar, but not in multiepg mode so i'm not quite sure if its xmltv data or just sat data epg.

i'm talking about epg that shows in front of each channel (current show on)

how do u configure wich epg data u want? i selected xmltv zon/meo, press download and that's it.
what do i have to do more ?

[kooleracer]

i'm talking about epg that shows in front of each channel (current show on)

how do u configure wich epg data u want? i selected xmltv zon/meo, press download and that's it.
what do i have to do more ?

nothing.

[triplexxx]

my Azbox elit stock in booting after update RTi_core_1.0.0_BETA its any way to fix it

[asso99]

@ The_Ripper and Co

Can you upload the old audio driver with the new audio driver I have more problems

thx
asso99

[xanadu]

I am getting runtime error 75 on running the latest Azup.

path/file access error


EDIT* Got it working now on W7 using XP compatibility mode. :)

[VFL]

me having sound Problem some on SKYUK
all better now only sound problem! Plugins not have
but this imgae more better

[xanadu]

Premium Plus Tested.

Some Audio break up distortion on SD channels noted after a few minutes left on channel.

Audio does not always lock in when changing channels.

No 1080p mode in setup DVI settings. Should there be using HDMI?

Picture quality ok SD/HD

Slower changing channels than previous version.

Remote keys not mapped correctly on some functions like Audio track.

Media Player not working

Fan ok.

-------------------------------------------------------------------------------------------

Overall very happy compared to last version, as this is more useable.

Keep up the good work. :D

[numark0504]

in radio mode i have no sound.... tv works perfect:respect-053:

[T0rca1950]

Daconi75 @ novisf.com:


Evo mali info za sve vas i za bolju Beta 1.0.1, bice veceras ili sutra nove verzije. Jer je i promjenjen algoritam za audio/video kompenzaciju pa ce sync biti besprijekoran,mada i sada nije lose, te ostale promjene koje ce samim izlaskom istog biti napisane..

Pozdrav i hvala RTi Timu za obavjestenje..

He says that tonight or tommorow the next Beta will come out, there will be some algorithm fixes and few other changes that will be published in the changelog. :applause-003:

[jkont]

my Azbox elit stock in booting after update RTi_core_1.0.0_BETA its any way to fix it
Me too !

I used to have green error screens .
After reinstallation of new firmware it stucks on booting screen.

I can't even test it.

:banghead:

[png]

why don't u guys use 2.2.1 ? it fixs bugs.

how did you get cccam installed

[scopus]

Premium Plus Tested.

Some Audio break up distortion on SD channels noted after a few minutes left on channel.

Audio does not always lock in when changing channels.

No 1080p mode in setup DVI settings. Should there be using HDMI?

Picture quality ok SD/HD

Slower changing channels than previous version.

Remote keys not mapped correctly on some functions like Audio track.

Media Player not working

Fan ok.

-------------------------------------------------------------------------------------------

Overall very happy compared to last version, as this is more useable.

Keep up the good work. :D


Does the blind scan work??

[xanadu]

Me too !

I used to have green error screens .
After reinstallation of new firmware it stucks on booting screen.

I can't even test it.

:banghead:

Do you see recovery mode when USB stick with patch.bin left in and reboot?

If not, try reading this https://www.satpimps.co.uk/showthread.php?t=141544

[xanadu]

Does the blind scan work??

No blindscan yet.

[amyren]

This is my experience of the new beta on my Premium box.
My setup: I have cccam 2.1.4 installed (using the excellent instructions in post #1460)
Diseq 1/10 with 8 LNBs

- LNB setup working fine.
- backup/restore settings function works fine.
- Sound working fine here. (Had some trouble at first with missing sound, and frequent kog wheels apering after zapping a few channels. Then needed to reboot. But a fresh channel search did fix this.)
- webinterface not present ? (its mentioned in the release info)
- HDMI 720p working. Trying to change to 1080i from the A/V menu, but nothing happens.
- volume button up not mapped
- In some menues its impossible to navigate with remote, it will always jump two steps when pressing up or down.
- Some channels is getting the SID not found in PAT message, even after a fresh scan.
- Could not get mediaplayer to work, tried some mp4 and xvid files.
- Get occational freezes (kog wheel spins) when zapping and must reboot.

[kooleracer]

This is my experience of the new beta on my Premium box.
My setup: I have cccam 2.1.4 installed (using the excellent instructions in post #1460)
Diseq 1/10 with 8 LNBs

- LNB setup working fine.
- backup/restore settings function works fine.
- Sound working fine here. (Had some trouble at first with missing sound, and frequent kog wheels apering after zapping a few channels. Then needed to reboot. But a fresh channel search did fix this.)
- webinterface not present ? (its mentioned in the release info)
- HDMI 720p working. Trying to change to 1080i from the A/V menu, but nothing happens.
- volume button up not mapped
- In some menues its impossible to navigate with remote, it will always jump two steps when pressing up or down.
- Some channels is getting the SID not found in PAT message, even after a fresh scan.
- Could not get mediaplayer to work, tried some mp4 and xvid files.
- Get occational freezes (kog wheel spins) when zapping and must reboot.

to add something VFD is not displaying properly when channel name is longer it doesnt move like on Azbox FW.

[bobster]

@kooleracer
Change VFD scroll in VFD settings.

[richy18]

I've tested RTi 1.0.0 core on my Azbox Premium +. Here are the results:

- Installing and starting AzUp1.2
-- Win7 compatibility-mode -> ok
-- XP in VirtualBox on Linux -> ok
--- why not compiling a native LinuxAzUp???
--- why not make AzUp work under WINE???

- Flashing 1.0.0 core (formerly installation 1.0.31 alpha) -> ok

- First boot -> ok (E2 is up and working)

- Factory Reset -> NOT OK (gears comes frequently, have to reset, this worked already with 1.0.31!!)

- Configuration w izard -> NOT OK (causes green screen, this worked already with 1.0.31!!) see attached picture

- flashing the image again and changing some settings without w izard
-- language german -> ok
-- HDMI Resolution set to 1080p60 -> ok (changed by hand in /etc/init.d/bootup)
-- satellite configuration Diseqc A,B,C,D=19,2;13,0;28,2;23,5 -> ok
-- automatic channel search -> NOT FULLY OK
--- HDMI is gone while search
--- have to switch to scart to complete opereration but scart picture is also flickering
--- after aprox. one hour found 5027 channel
--- HDMI is not comming back, have to reboot

- CrossEPG configuring, downloading, parsing -> ok
-- EPG is still broken, it appears on some channels only

- Standby -> SEEMS OK

- WebIf-Plugin -> NOT OK (does not exist, this worked already with 1.0.31!!)

- System time is still to fast (not so fast as on 1.0.31 but still to fast)

- Timeshift -> NOT OK (same as 1.0.31)

- Recording -> NOT OK (same as 1.0.31)

- Sound -> better but NOT FULLY OK (sound is sometimes gone while zapping)

- changing root PW -> NOT OK (/etc/shadow does't exist)

- RCU -> NOT FULLY OK
-- sometimes up and down keys worked twice on single push
-- Volume up doesn't work

- watch FTA TV SD -> ok

- watch pay TV SD/HD(SKY) -> ok with cccam as client and a dreambox as server

- watch FTA HD -> ok

- watch HD -> NOT FULLY OK (movie is sometimes stuttering but it seems to be better when in 1.0.31)

- zapping performance
-- HD to HD (encrypted) = > 5 sec
-- SD to SD (encrypted) = ~ 5 sec
-- SD to SD (FTA) = ~ 2 sec
-- HD to HD (FTA) = ~ 3 sec
-- HD to HD (FTA) = ~ 4 sec

- zapping -> sometimes the gears appers/remain and "killall -9 enigma2" or reboot is necessary

- HDMI -> HDMI signal is regularly gone! After a few minutes the screen becomes a flicker, then - after another minute - HDMI signal is gone and never come back. Reboot is necesarry. This is really significant :(

- cardreader -> not tested

- SMARGO -> neither FTDI-Driver nor usbserial-Driver is included

Conclusion: Really great work from the_Ripper and his team!!! But it's not yet ready for livingroom use. Recording, EPG, Timeshift, RCU etc. are still work in progress. But it's ok... even Rome was not build in one day!! Really big steps are made and I suppose it will be great. The project need just more time to be perfect.

Best regards
richy18

[nitrogen14]

How to play network ts streams (H264/AC3) with service @ Azbox Enigma?

work fine:


cmd ="gst-launch -v playbin2 uri=%s > /tmp/gst.log" % stream_url
os.system(cmd)



dont work:



sref = eServiceReference(4097, 0, url)
self.session.nav.playService(sref )



can anybody help me?

[marlb64]

I've tested RTi 1.0.0 core on my Azbox Premium +. Here are the results:

- Installing and starting AzUp1.2
-- Win7 compatibility-mode -> ok
-- XP in VirtualBox on Linux -> ok
--- why not compiling a native LinuxAzUp???
--- why not make AzUp work under WINE???



And/or some other detailed instructions to perform the upgrade on a linux PC.

Grtz

[richy18]

And/or some other detailed instructions to perform the upgrade on a linux PC.

Grtz

No, sorry. At the moment you need a windows system.

[Abdul1508]

Hello again,

I put this morning Enigma2 beta on my azbox premium. one I went afternoon to work, and when I got home the picture pops up all the time. are there other people who suffer from this, but after the reboot the picture doing normal.

[asso99]

- HDMI -> HDMI signal is regularly gone! After a few minutes the screen becomes a flicker, then - after another minute - HDMI signal is gone and never come back. Reboot is necesarry. This is really significant :([/COLOR]



set it 1080ip works fine

[Abdul1508]

[QUOTE=Abdul1508;769024]

is your box connected with internet ?
i had the same problem i believe the plugin subtittle player needs internet ,no internet is a crash !


Yes I'm constantly connected to the Internet through the router, I think it is not the problem.

[vikino]

CrossEPG using xmltv ZON/MEO not working ... i auto reboot, schedule epg download, manual download and reboot, and nothing..
Am i doing anything wrong?

kooleracer what were your steps?
The EPG only so much that I set Cross EPG Downloader plugin, rebooted the box and begin the epg channel letter very much. It would also work if the clock did not go as fast forward, from the epg then they can not view the currently broadcasted program, because simply by time already elapsed. I do not know why the time is so fast forward??

[gravatasufoca]

here is a weird thing.
I talked to a mod from de official azbox forum, and he said: OPENSAT NOT SIGN THESE DEVELOPMENTS. AND OPENSAT IS NOT RESPONSIBLE AND DONT SUPPORT THOSE DEVELOPERS.

If its true, why developers thanked OPENSAT?

[Anrakh]

Which "official" Azbox forum? I doubt any of the forums are directly connected to the OpenSAT company.

[jamesjay]

As anyone had trouble going back to official firmware...I am using these instructions.

II) You have E2 in yourAZBox and now you want to install official FW

Switch off AZBox
Put usb stick with patch.bin (Official FW)
switch on AZBox
wait for IP adress on VFD of AZBox
Start latest ver of AZUp
Write IP adress in AZUp (see VFD)
Click on button Update
AZUp check for resque mode, also check ver of patch.bin (E2 or official fw)
AZUp Create 4 partition on DOM and formatted them
Copyng Official (old) kernel in Flash (about 2.5 min)
when get popup msg - first part of update is done, but dont remove USB stick from AZBOX
wait for reboot , and follow messages on GUI for update official FW (standard procedure)

It seems to run fine...I have rescue mode on the box and it shows the IP address so I run AZup and it loads to 100% then I get this:

01:35:31 > Conecting...
01:35:31 > Login...
01:35:32 > Login Success.
01:35:32 > Check rescue mode
01:35:32 > You have NEW kernel in your AZBox
01:35:33 > Rescue mode - OK
01:35:33 > Geting patch.bin ...
01:36:15 > Geting patch.bin - Done
01:36:15 > Creating Cramfs
01:36:16 > FW type : AZBox
01:36:16 > Umount USB
01:36:16 > FW ver. : Official FW
01:36:16 > Createing Partitions...
01:36:17 > Createing Partitions - Done
01:36:17 > Formating Partitions...
01:36:18 > Formating Partitions - Done
01:36:18 > Preparing...
01:36:20 > Sending Cramfs ...

And then I get a small box saying "cant create requested file on server" I have tried various official firmware and various other things like connecting laptop directly to box (no router) but the process stops before it loads the official firmware. Anyone have any idea what is going wrong...by the way I am using Vista laptop and running AZup as the administrator?

[dempsey]

I had the same problem but on XP
Then I tried AZUp 1.1 and the second attempt they were successful

[azbox4ever]

As anyone had trouble going back to official firmware...I am using these instructions.

II) You have E2 in yourAZBox and now you want to install official FW

Switch off AZBox
Put usb stick with patch.bin (Official FW)
switch on AZBox
wait for IP adress on VFD of AZBox
Start latest ver of AZUp
Write IP adress in AZUp (see VFD)
Click on button Update
AZUp check for resque mode, also check ver of patch.bin (E2 or official fw)
AZUp Create 4 partition on DOM and formatted them
Copyng Official (old) kernel in Flash (about 2.5 min)
when get popup msg - first part of update is done, but dont remove USB stick from AZBOX
wait for reboot , and follow messages on GUI for update official FW (standard procedure)

It seems to run fine...I have rescue mode on the box and it shows the IP address so I run AZup and it loads to 100% then I get this:

01:35:31 > Conecting...
01:35:31 > Login...
01:35:32 > Login Success.
01:35:32 > Check rescue mode
01:35:32 > You have NEW kernel in your AZBox
01:35:33 > Rescue mode - OK
01:35:33 > Geting patch.bin ...
01:36:15 > Geting patch.bin - Done
01:36:15 > Creating Cramfs
01:36:16 > FW type : AZBox
01:36:16 > Umount USB
01:36:16 > FW ver. : Official FW
01:36:16 > Createing Partitions...
01:36:17 > Createing Partitions - Done
01:36:17 > Formating Partitions...
01:36:18 > Formating Partitions - Done
01:36:18 > Preparing...
01:36:20 > Sending Cramfs ...

And then I get a small box saying "cant create requested file on server" I have tried various official firmware and various other things like connecting laptop directly to box (no router) but the process stops before it loads the official firmware. Anyone have any idea what is going wrong...by the way I am using Vista laptop and running AZup as the administrator?

To back to the officiel fw you must use Azup 1.1

[BANEP]

firware no stable returne fw origine:winner-019:

[medmed]

firware no stable returne fw origine:winner-019:

this is 1st BETA Firmware not final firmware.
please wait

[paulobr]

this is 1st BETA Firmware not final firmware.
please wait

Existe any possibility to put the media player work?

[richy18]

set it 1080ip works fine

I have set to 1080p60 when the problem occurred.

[stavross]

@Ripper & Team

If I could get multimedia to work I would stick with this beta version is there any way I could add the file from previous alfa release to make it work if so could you upload the files here and any aditional info??????? Tryed project valerie but would not play anything

Thanks again really great work guys (I don't want to go back to original FW please help)

:king-042: :respect-062: :respect-051: :respect-063:

Stavross

[richy18]

Addendum to testing RTi 1.0.0 on Azbox Premium +

1. Today I boot up my Azbox and the screen is suddenly colored pink. The movie can be seen but the colors are completely pink.
So I turned the Box into Standby - after awaking the HDMI signal is lost. Have to reboot...

2. After reboot the colors are ok. While the box is booting the VFD shows strange charakters (see attached photo).

3. Booting time from "VFD Ready" to 100% = ~60sec (this is good - my dream 800HD takes a lot of more time)

4. Power measurement while HDD is suspended:
- normal operation (in Watts): 22,5W
- Standby: 15,5W

Regards
richy

[satboss]

i ve tested the BETA firmware on elite and premuim . great job guys ;

[richy18]

Addendum 2 to testing RTi 1.0.0 on Azbox Premium +

- while zapping the box causes reproducible a green screen (see crachlogs attached)

- as described in first testing HDMI-signal is lost after estimated ten minutes till one hour of operation. This is reproducible too.

Regards
richy

[bevste]

When installed the system clock was running way to fast, one day later its 30 minutes behind? Anyone else got the same problem?

[gravatasufoca]

Which "official" Azbox forum? I doubt any of the forums are directly connected to the OpenSAT company.

azboxworld.com

[sattommy]

Guys,

I just tested multimedia from nfs share and this is working. So are most people using usb?

Gr.

Tommy

[rtificial]

Guys,

I just tested multimedia from nfs share and this is working. So are most people using usb?

Gr.

Tommy

That's interesting...

As for what I read yesterday, it was also attempted by some users by mounting their internal harddisk.

I do assume however you have the same problems selecting a file by using the remote control? Or do you have a different approach?

[richy18]

i ve tested the BETA firmware on elite and premuim . great job guys ;

Would you please share your test results with us?
The easiest way to find the bugs is to analyse these results (descriptions, crash-logs, screenshots etc. etc.).

Your post is nice but not really useful for the further development :leaving:

[Abdul1508]

Guys,

I just tested multimedia from nfs share and this is working. So are most people using usb?

Gr.

Tommy

No, I use an internal HDD from WD. if I switch to internal HDD on the media player he jumps unselect.

[paulobr]

Guys,

I just tested multimedia from nfs share and this is working. So are most people using usb?

Gr.

Tommy

I'm using usb and does not work

[richy18]

Guys,

I just tested multimedia from nfs share and this is working. So are most people using usb?

Gr.

Tommy

I tried to playback movies from HDD I had formerly recorded with original image (*.ts).
That's does not work!

I also tried to playback movies from HDD I have downloaded (*.mkv). My Dream800HD can deal with it, the RTi 1.0.0 not. The screen simply becomes black and the playback time remains on 0:00

What kind of multimedia files you have tested?

[paulobr]

can anyone know witch button i press to see epg?

[sattommy]

That's interesting...

As for what I read yesterday, it was also attempted by some users by mounting their internal harddisk.

I do assume however you have the same problems selecting a file by using the remote control? Or do you have a different approach?

Yes this is a e2 gui problem. I have not worked on this. Not sure why this has a bug currently

[richy18]

When installed the system clock was running way to fast, one day later its 30 minutes behind? Anyone else got the same problem?

Yes, of course. On my box is much more faster. I guess a few hours a day...
Do you have this "hardware acceleration" on original image activated?

Please try "cat /proc/cpuinfo" on telnet and show us the bogomips.

My box have:
Initial BogoMIPS: 342.01

I suppose the differences between this time-bug descriptions depends on it.

[sattommy]

I tried to playback movies from HDD I had formerly recorded with original image (*.ts).
That's does not work!

I also tried to playback movies from HDD I have downloaded (*.mkv). My Dream800HD can deal with it, the RTi 1.0.0 not. The screen simply becomes black and the playback time remains on 0:00

What kind of multimedia files you have tested?

I teste avi,mkv, vob, mp3 all from nfs mount.

As for ts files, this is not supported yet. Codec needs te be added. Working on audio channel selection and seeking currently.

[richy18]

can anyone know witch button i press to see epg?

Try info-button (the white button with the book on it) and you'll see EPG for the current transmission. Now press yellow and you'll see channel EPG...

If not, you have no EPG data. It's still a bug...

[moicas3004]

Im using external USB HDD and no go. Doesnt play anyting. The same existed in the version 31, no play in the multimedia.

[dvinko]

I'm using internal HDD in Premium model, and the same thing for me too: will not play anything, regardles of the file format. Same error was also in version 31.

[jaksa72]

Guys,

I just tested multimedia from nfs share and this is working. So are most people using usb?

Gr.

Tommy

Hi

I also tried to play .avi files from usb and nfs share but for me it does not work .
I mount my nfs share trough telnet :
mount -t nfs 192.168.1.14:/d/Downloads /media/net -o nolock,rsize=32768,wsize=32768,in tr

I can see the files but not play them (black screen)
YouTube player does not work also

My box is premium

[xanadu]

I teste avi,mkv, vob, mp3 all from nfs mount.

As for ts files, this is not supported yet. Codec needs te be added. Working on audio channel selection and seeking currently.

So you are saying media streaming works ok.

The problem is most are using USB or HDD ext/int and media player does not play anything at all.

[kasukabe]

I can't also play any of my files using USB.
Screen is black and time remains on 0:00:00.
On YouTube the same problem.
I have an Elite.

[Doume]

Yes, of course. On my box is much more faster. I guess a few hours a day...
Do you have this "hardware acceleration" on original image activated?

Please try "cat /proc/cpuinfo" on telnet and show us the bogomips.

My box have:
Initial BogoMIPS: 342.01

I suppose the differences between this time-bug descriptions depends on it.

My box (Elite) never had hardware acceleration activated
And the clock is crazy ( ~ 2 times too fast ! )



system type : Sigma Designs TangoX
processor : 0
cpu model : MIPS 4KEc V6.9
Initial BogoMIPS : 293.88
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : yes
ASEs implemented : mips16
shadow register sets : 1
VCED exceptions : not available
VCEI exceptions : not available

System bus frequency : 80000000 Hz
CPU frequency : 80000000 Hz
DSP frequency : 80000000 Hz

[moicas3004]

Sattommy

One more thing about Media Player

When we are in the movies dir, for each RCU click the onscreen cursor goes 2 spaces.

In the list, for example, im in movie 1 and i press RCU to go down to movie 2 but the cursor in the list goes to movie 3. Again i press for movie 4 and the cursor goes to movie 5.

Can you check this please, and the failure to play movies in usb HDD. Is just what is missing for daily use of this great Firmware.

[amyren]

I turned off my Azbox yesterday, and today when I turned it on it just kept rebooting itself.
Then I remembered that I had disconnected my network adapter also, when connecting this, the Azbox booted as normally. So it seemes that the Azbox refuse to boot if network is not present. (I have cccam with autostart, so maybe that can cause problems if server not found)

I also experienced that the HDMI output sometimes is pinkish, and needs to reboot to get it normal.

I did a software update from the menu, and it did download and install two packages. After this it tried to reboot itself, but hung, so I had to restart it manually.
After this update the zapping seemed a lot faster here:) Any idea about what's in that update?

[amyren]

Guys,

I just tested multimedia from nfs share and this is working. So are most people using usb?

Gr.

Tommy

Many people with premium and harddrive have probably, like me, a lot of downloaded movies on their harddrive from earlier.
I also only get a black screen when trying to play mp4 or avi files from harddrive.

[dvlajkovic]

I did a software update from the menu, and it did download and install two packages. After this it tried to reboot itself, but hung, so I had to restart it manually.
After this update the zapping seemed a lot faster here:) Any idea about what's in that update?

LoL... that's REALLY interesting... so far, no one reported of any E2 server for AZbox with live updates. What menu have you used for "software update"?

[richy18]

I also experienced that the HDMI output sometimes is pinkish, and needs to reboot to get it normal.

I did a software update from the menu, and it did download and install two packages. After this it tried to reboot itself, but hung, so I had to restart it manually.
After this update the zapping seemed a lot faster here:) Any idea about what's in that update?

I've done these updates too...

Zapping speed:

FTA
SD to SD: ~2.8 - 1.8 sec (very different)
SD to HD: ~2.5 sec
HD to HD: ~2.8 sec

ENCRYPTED
SD to SD: ~5 - 6 sec
SD to HD: same
HD to HD: same

I cannot see any speedup.

All measures are with channel up/down button. If i go to the channel list, choose a new channel and press ok it's faster ( FTA sometimes < 2 sec).

All in all the zapping speed is comparable with my Dreambox800HD. With newnigma2 Image it's as slow too...

[richy18]

LoL... that's REALLY interesting... so far, no one reported of any E2 server for AZbox with live updates. What menu have you used for "software update"?

-> Menu button on RCU
-> choose "Settings"
-> choose "Software management"

[gadgeteer]

Just the info.......

If you open the box and go to sleep, when you wake up, the channel will already lose sync(no sound) and the picture is always jitter.
Actually, it starts to lose sync after a couple of hours.

Personally, I think that the previous firmwares( .29 and .31) are more stable than this firmware.

[emko]

Just the info.......

If you open the box and go to sleep, when you wake up, the channel will already lose sync(no sound) and the picture is always jitter.
Actually, it starts to lose sync after a couple of hours.

Personally, I think that the previous firmwares( .29 and .31) are more stable than this firmware.

I agree with you. I've only tried 1.0.25 and it has better stability than this one.It worked smooth, with sound problem but this release is full of bugs.

[digihoe]

I've done these updates too...

Zapping speed:

FTA
SD to SD: ~2.8 - 1.8 sec (very different)
SD to HD: ~2.5 sec
HD to HD: ~2.8 sec

ENCRYPTED
SD to SD: ~5 - 6 sec
SD to HD: same
HD to HD: same

I cannot see any speedup.

All measures are with channel up/down button. If i go to the channel list, choose a new channel and press ok it's faster ( FTA sometimes < 2 sec).

All in all the zapping speed is comparable with my Dreambox800HD. With newnigma2 Image it's as slow too...

Hi, I just want to respond to this.

I too had problems with slow zapping using this release, however after I did a full service scan and opened the channel(s) one time after scan, zapping is MUCH better I would say around 1 sec. Also this seems to fix the audio problem I had before where no audio could be heard. Maybe the pid settings has been screwed up when just transferring a list.

I find it odd how the service scan is done, I have a USALS system with ~12 sat positions chosen. The scan would jump from 39e to 15w just to search some transponder later to switch to a new position and search a transponder there, this making the dish go back and forward. Is this how the scan works on other E2 systems with USALS (to me it seem a bit odd not to search one position/sat at a time).

I can't get internal (hdd) or external USB2 (hdd) video files to work (avi,mkv,mp4,etc) on this version though.

Best regards!

[bevste]

Yes, of course. On my box is much more faster. I guess a few hours a day...
Do you have this "hardware acceleration" on original image activated?

Please try "cat /proc/cpuinfo" on telnet and show us the bogomips.

My box have:
Initial BogoMIPS: 342.01

I suppose the differences between this time-bug descriptions depends on it.


system type : Sigma Designs TangoX
processor : 0
cpu model : MIPS 4KEc V6.9
Initial BogoMIPS : 293.88
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : yes
ASEs implemented : mips16
shadow register sets : 1
VCED exceptions : not available
VCEI exceptions : not available

System bus frequency : 200250000 Hz
CPU frequency : 300375000 Hz
DSP frequency : 300375000 Hz

Strangely just rebooted box and its reset the time and its spot on now dont know why it didnt before assume it will start to lose or gain? And no hardware acceleraton is not enabled!

[waxfuzz]

I have an usb drive 500GB 2.5" , and i can't format it. I get an error that say can mount the drive.

[satdish101]

audio issues still present here as well. some channels no ability to change voume. tuner config aection has strange (repeatable) bug where it prompts if you want to delete satellite. channel zapping subjectively not as fast as 031. manual dish pointing section also buggy. even with all of the above, it has far greater potential than factory firmware. big thanks to the_ripper and team for work thus far.

[amyren]

LoL... that's REALLY interesting... so far, no one reported of any E2 server for AZbox with live updates. What menu have you used for "software update"?

I did it from the menu > setup > software management > software update

But I must correct myself a bit, I thought the update made my zapping faster.
It was the reboot that did that. I noticed that for encrypted channels zapping speed slows down a lot sometimes after running the box a bit.

But another thing from the software management > manage extensions
I tried install some plugins for testing and found that the plugin Cccam Info 1.3
and the Google Maps are working.

Google maps is of limited use, since it doesnt seem to respond to any scrolling, but this could be due to that the RC keys are not mapped for this plugin.
But the search function and the zoom setting from the menu works, so you should be able to display a map of the searched adress.

Also the IMDB plugin runs, and it does search for movie titles, but selecting one from the found list will result in a failed download. But I think this is the plugin itself that needs updating, because I get the exact same behaviour when running this plugin on my DM800.

What not to try to download is the DVD player plugin, this will install itself in the menu, but will crash the Azbox when trying to use it.
Also downloading the MyTube plugin is not recommended, as it seemes to break the built-in youtube plugin.

[amyren]

Most people have noticed that the volume up button doesnt work...

Anyone know how to reset the volume setting again if you have lowered the volume to much and are stuck with almost no sound?

[fundidun]

Most people have noticed that the volume up button doesnt work...

Anyone know how to reset the volume setting again if you have lowered the volume to much and are stuck with almost no sound?

Used until repaired, WEB Azbox and you can control the volumen

http://img98.imageshack.us/img98/3779/volumeno.jpg

[MrKappa]

@moderators:

Now this thread reached more than 140 pages!!!
For my humble opinion it make not sense to continue the same thread that will be more and more difficult to read and to find the correct information.
There will be risk of increasing the possibility of people asking the same question as they cannot read the complete discussion.
Please, I'd like to suggest the moderators to close this discussion and open a new discussions for each of next new releases. We could simply start with the discussion for "RTi core BETA 1.0" with the release note and same for next. etc.
What do you think?

[richy18]

Hi, I just want to respond to this.

I too had problems with slow zapping using this release, however after I did a full service scan and opened the channel(s) one time after scan, zapping is MUCH better I would say around 1 sec.


That doesn't work for me. I've made a full service scan (found ~5000 channels on four satellites) but it is as slow as before :frown:

[richy18]

Used until repaired, WEB Azbox and you can control the volumen


Yes, I can confirm that but you have to install webif before.

I've found it here:
https://www.satpimps.co.uk/showthread.php?t=139902

[antonis13]

by satman72

to solve the bug into volume up, replace the file ActionMap.pyo (coping it from previous beta ver.) into /usr/lib/enigma2/python/Components/

http://rapidshare.com/files/432728035/ActionMap.pyo

[waxfuzz]

Someone can mount a usb harddrive with the menu configuration?

[fundidun]

Multiupload is better


Download can not be started.

Too many parallel downloads from your IP address or the limit for free downloads has been reached.
This is usually a temporary problem and can be solved by retrying the same URL at a later time or by becoming a RapidPro-user.
Do you want to upgrade to RapidPro?

[kanber_kav]

ActionMap Download link
http://www.mediafire.com/file/5f4c8htwczt88xl/ActionMap.rar

[amyren]

by satman72

to solve the bug into volume up, replace the file ActionMap.pyo (coping it from previous beta ver.) into /usr/lib/enigma2/python/Components/

http://rapidshare.com/files/432728035/ActionMap.pyo

Great.
BTW this also seem to fix the bug that makes the remote take 2 steps up / down in some menues.

[Abdul1508]

I'm using internal HDD in Premium model, and the same thing for me too: will not play anything, regardles of the file format. Same error was also in version 31.

could you select the hdd on the media player, because it does not
work with me every time I use my remote to select the internal hdd he switched to another folder.I also have a azbox premium with internal HDD?

[@telesat]

AzUP v1.2.5 by telesat


whats new :

* Device - choose where You want to install Enigma : on internal DOM , on USB where is also patch.bin file or in Internal HDD

* Advanced options :
- Format Extended partition - if You are using the DOM bigger than normal one >256MB , AZUp automatically create also extended partition, if this option is checked , also that partition wll be formatted , this use for first installation on HDD, but on future installations this should be unchecked, or turned off , to prevent formatting rest of the space on HDD with Your files, movies, music...
Consider same if you are using bigger DOM (>256MB) , for Installation on USB stick always is formatted extended partition.

- Copy kernel - if You are sure that Kernel is not changed for the version of Enigma 2 which You are going to load , You can turn OFF this option to speed UP process of loading new Enigma 2 in Your receiver.

* DHCP ON/OFF - If You don't have active DHCP server on network, Turn ON DHCP that AzBox can get an IP (and also to show that IP on VFD)
When You activate DHCP , if AzBox or some other device which is located on same LAN ask for Network parameters - In field above button DHCP ON/OFF You will get IP address which is leased to that device.
If You are loading Enigma on ULTRA model which is without VFD , my suggestion is that You use crossover network cable and that You connect Ultra directly to Your PC/Notebook on which You are running AZUp, which will make You sure that just ULTRA is getting IP address from AZUp - which AZUp will show You above DHCP ON/OFF button

* Find IP in LAN - searching for accessible devices with IP on LAN group, in which is also located Your PC/Notebook where is AzUp running (mask 255.255.255.0)
This can help You on work with Ultra model if he is connected on LAN where is already running DHCP Server ( As Ultra model missing VFD ).


Bug Fix :
* Fixed problem with returning to Official Firmware





RTi core 1.0.1 BETA

What is new :

- Fixed Audio sync ( now all should be ok ).

- Fixed HDMI Hotplug

- Fixed Web Interface

- Fixed Volume UP


More to come :

Work on recording and subtitles, Online software update ( Drivers and System components )

Currently under work :

- Fix for Multimedia

For more information visit :

http://www.azbox-enigma.eu

Soon Bug track !!!



Download : www.azbox-enigma.eu (http://www.azbox-enigma.eu/upload/RTi_Core_1.0.1.BETA.rar)

rgs,

[hfmls]

thank you very much :)
bug track system would be great! If some user reports repeated bug without checking list first should get a warning! :)


btw: i just hope epg works now and clock (isn't fast) as it used to be :)
i can't watch tv without epg, that's the only thing keeping me from using it :P

THANK YOU TELESAT,THE_RIPPER,MICKEYSA, SATTOMMY AND ALL THE REST NOT FORGOTTEN.

[hfmls]

after a few minutes testing i gotta say only EPG is still broken!! Could it be because clock is so so fast ? Clock hour is always wrong :S
STC driver is simply perfect The_Ripper.
Well... 99,99999999% perfect.
I got 1 little problem, after reboot we get image and no sound, but if we change channel all goes perfect!
So that's only thing "wrong" after boot, no sound, if we change one time channel problem disappears till next reboot.

[hfmls]

;769193']How are CrossEPG working? Like a enigma2 dreambox?? Or use internet to download EPG??
I remember, for ZON many receivers get EPG for several days.

i still can't work this out, how did u set this up in dm800?
i chose ZON/MEO from XMLTV list, and then what? :)

[hfmls]

i did this to setup CrossEPG:

Enigma2 installation (dreambox)

with a unix compatible editor edit the file /usr/bin/enigma2.sh and before the line

LD_PRELOAD=/usr/lib/libopen.so.0.0 /usr/bin/enigma2

add this line

/usr/crossepg/crossepg_epgmove.sh



After reboot i went to download manually, then i reboot again, and EPG fully working.
:) :) :)
Now only clock gets crazy :)

[gadgeteer]

Running RTi Core 1.0.1....

Don't you guy face jitter in watching HD channel?? Does it run smoothly?? I have this problem since using RTi Core. Comparing to previous firmware( .31 or .29), when I got sync(sound on), the HD channels ran just perfect.

Thanks......

[DGSCronos]

Running RTi Core 1.0.1....

Don't you guy face jitter in watching HD channel?? Does it run smoothly?? I have this problem since using RTi Core. Comparing to previous firmware( .31 or .29), when I got sync(sound on), the HD channels ran just perfect.

Thanks......

Yeah, I have the same problem. And only with the HD channels.

[sattommy]

i did this to setup CrossEPG:

Enigma2 installation (dreambox)

with a unix compatible editor edit the file /usr/bin/enigma2.sh and before the line

LD_PRELOAD=/usr/lib/libopen.so.0.0 /usr/bin/enigma2

add this line

/usr/crossepg/crossepg_epgmove.sh



After reboot i went to download manually, then i reboot again, and EPG fully working.
:) :) :)
Now only clock gets crazy :)

maybe you could run a local ntp client every 5 minutes

[swgw]

Nice job ripper team things will only get better. we are lucky you have taken on the job to make the AzBox better.

have a few beers or 3 team.

[rtificial]

maybe you could run a local ntp client every 5 minutes

That's not a bad idea actually. Could be a good work around.

[eppie]

crossEpg is working !!
I installed cooltvguide 2.0.11 and it works perfect .
Webinterface ok.
And for now no freeze when zapping on hd_channels.
:respect-023: to The_ripper and team :cup-006:

[CoolST]

thanks for the fast update .
But now At work Can't testing .
i see hfmls test report , and i think we have better version now .

Graet .

[rtificial]

maybe you could run a local ntp client every 5 minutes

The attached ntp ipk might work.

[tul]

does the RF out work in any way with some plugins we can install?
thats a feature i didnt want to loose with the use of the great E2 for azbox by the Ripper and his team

[eppie]

The clock is going slow in standby 10minutes takes 11minutes in standby ,so when watching tv to fast standby to slow .

[amyren]

i still can't work this out, how did u set this up in dm800?
i chose ZON/MEO from XMLTV list, and then what? :)

On the DM800 you dont need to set up anything, the EPG data is loaded from DVB. Certain channels carry the EPG data and just zapping by them from time to time will keep your EPG up to date.
eg, for telenor on 0.8w I just go to Discovery Science and stay there for a short while, then all channels for this provider have full EPG for many days.
All the images I have tested lately (gemini, dreamelite, peterpan, newnigma) does this automaticly, no need to set anything up.

[[0_o]]

On the DM800 you dont need to set up anything, the EPG data is loaded from DVB. Certain channels carry the EPG data and just zapping by them from time to time will keep your EPG up to date.
eg, for telenor on 0.8w I just go to Discovery Science and stay there for a short while, then all channels for this provider have full EPG for many days.
All the images I have tested lately (gemini, dreamelite, peterpan, newnigma) does this automaticly, no need to set anything up.

Yea! Thats my point! I'm trying to say that about ZON. Works with ZON, when we in put in any channel of 11811 H transponder (RTP1 for exemple), like works in telesat like you say. :)

[[0_o]]

does the RF out work in any way with some plugins we can install?
thats a feature i didnt want to loose with the use of the great E2 for azbox by the Ripper and his team

I use it too! So it's one of the two things that I'm waiting too (RF modulator and internal cardreader).

But, afaik RF is working in previous versions of E2! The only thing you cant do is choose your RF channel. Try to do a little scan on your TV :)

[valerie]

crossEpg is working !!
I installed cooltvguide 2.0.11 and it works perfect .
Webinterface ok.
And for now no freeze when zapping on hd_channels.
:respect-023: to The_ripper and team :cup-006:

how yo install it thanks a lot

[nervis]

how yo install it thanks a lot


put file in /tmp/ folder

in telnet:


ipkg install /tmp/enigma2-plugin-extensions-cooltvguide_Coolman_V.0.11_all.ip k

and reboot

[pateken]

I wait fix for wifi and Dvb-T for E2!

E2 has become slow in exchange encrypted channel HD?

thank's

:bow-004:

[amyren]

The 1.01 beta did fix the volume up issue, but the "two steps at once" issue for some submenus is still there.

However, the solution posted in post #2861 (se also #2864 for alternative download) did fix this for the first beta. It also works for this version.

[eppie]

put file in /tmp/ folder

in telnet:



and reboot

more easy put it in root with ftp
and then go(with remote control) to menu/setup/software management/install local extension/internal flash or in root hard disk select harddisk.
select the file and push the green butun .
no need for telnet

[nervis]

more easy put it in root with ftp
and then go(with remote control) to menu/setup/software management/install local extension/internal flash or in root hard disk select harddisk.
select the file and push the green butun .
no need for telnet


yes but is important learning to use telnet too

[valerie]

more easy put it in root with ftp
and then go(with remote control) to menu/setup/software management/install local extension/internal flash or in root hard disk select harddisk.
select the file and push the green butun .
no need for telnet

how in root
thanks alot

[stevie1961]

i did this to setup CrossEPG:

Enigma2 installation (dreambox)

with a unix compatible editor edit the file /usr/bin/enigma2.sh and before the line

LD_PRELOAD=/usr/lib/libopen.so.0.0 /usr/bin/enigma2

add this line

/usr/crossepg/crossepg_epgmove.sh



After reboot i went to download manually, then i reboot again, and EPG fully working.
:) :) :)
Now only clock gets crazy :)
Thanks for the great info, can confirm that Sly UK works now also.
Getting better by the day :respect-046:

[tul]

;769665']I use it too! So it's one of the two things that I'm waiting too (RF modulator and internal cardreader).

But, afaik RF is working in previous versions of E2! The only thing you cant do is choose your RF channel. Try to do a little scan on your TV :)

ty, will do then, i dont mind not having the option to change the chann.

[pippapeppa]

Hi All,

Very compliment to the Team for the commitment and strong work that are performing.

I am going to install E2 on my Azbox Premium, a little question:
After the upgrade to E2 I will able to access to Internat HD with all file content (Video, Photo,...) ?

Thanks a lot.

Pippapeppa

[emko]

Hi All,

Very compliment to the Team for the commitment and strong work that are performing.

I am going to install E2 on my Azbox Premium, a little question:
After the upgrade to E2 I will able to access to Internat HD with all file content (Video, Photo,...) ?

Thanks a lot.

Pippapeppa

I don't think so until they fix bug wtih multimedia player.

[blackmore]

crossEpg is working !!
I installed cooltvguide 2.0.11 and it works perfect .

intall, but how do you configure it to sky Italy?

[moicas3004]

@The ripper

Hi, here in Meo Sat 30W the same problem, many pixels and bad reception os that package. ZON 30W work's perfect.

I suspected that could be the signal but i incrised the sat signal to 85% on meo TP and the same pixelization is occuring.

Heres a small video on the problem.

http://www.youtube.com/watch?v=8sRLFZS9_jg

The only FW i didn´t have this problem was in the first one withou sound, after that, the problem remains.

In Opensat FW, i have no problem with this.

So if you can check this, when you have time offcourse, i would apreciated.

[vrlika]

is it possible to do a fresh channel scan with this version of e2 ?

[stevie1961]

is it possible to do a fresh channel scan with this version of e2 ?

Thought hard about answering this one.......but yes, of course

[VFL]

i have now new patch again what i have check
- sound astar 2 few channel still not fixed
- wiche is option channel button on sky sport info
- when i press green button it will getting green screen


Enigma2 installation (dreambox)

with a unix compatible editor edit the file /usr/bin/enigma2.sh and before the line

LD_PRELOAD=/usr/lib/libopen.so.0.0 /usr/bin/enigma2

add this line

/usr/crossepg/crossepg_epgmove.sh



After reboot i went to download manually, then i reboot again, and EPG fully working.

after reboot 2% after come premium then not loading.

re patch again still some

[stevie1961]

My favorite way of loading a new image.

Copy image to a fat32 formatted USB stck.
Upload with newest AZup.
Remove USB stick and reboot.
Setup tuner cofiguration.
Use Settingsmaker 1.4 to create new channel list and open the resulting lamedb file with Dreamboxedit. Save this to the box
Reboot
Setup network and NFS shares
Use filezilla to upload enigma2_plugin_sgc_menu_latest_mi psel.ipk to/tmp folder
Use telnet and type:- ipkg install /tmp/enigma2_plugin_sgc_menu_latest_mi psel.ipk
https://www.satpimps.co.uk/attachment.p...9&d=1287740905
Reboot
Use filezilla to upload enigma2-plugin-glasssysutil_2.39_mipsel.ipk
Use telnet and type:- ipkg install /tmp/enigma2-plugin-glasssysutil_2.39_mipsel.ipk
Reboot.
Upload Cccam.cfg to /etc, press blue button and start Cccam.
Go into plugins and setup crossepg for the sats you want.

Follow as per hfmls's post,

With a unix compatible editor edit the file /usr/bin/enigma2.sh and before the line

LD_PRELOAD=/usr/lib/libopen.so.0.0 /usr/bin/enigma2

add this line

/usr/crossepg/crossepg_epgmove.sh

There is a software Libary with in settings/software management, but not many work.

At the moment everything Receiver wise is working fine complete with full EPG.

Can I say a big Thank You to the RTI team, If it was'nt for them, this box would have been buried months ago. :respect-023: :champion-018::bravo-009:

AZbox Elite
2x 90cm dishes
8 lnb's and motor

[hfmls]

i notice HD channels using 1080p resolution (didn't test with 720p) stutter just a little bit, anyone having this problem?

[stevie1961]

My HD channels, I get only sound, no picture, But I havent done a service scan yet. That would probably fix it, but no need yet.

[ericek74]

@The ripper

Hi, here in Meo Sat 30W the same problem, many pixels and bad reception os that package. ZON 30W work's perfect.

I suspected that could be the signal but i incrised the sat signal to 85% on meo TP and the same pixelization is occuring.

Heres a small video on the problem.

http://www.youtube.com/watch?v=8sRLFZS9_jg

The only FW i didn´t have this problem was in the first one withou sound, after that, the problem remains.

In Opensat FW, i have no problem with this.

So if you can check this, when you have time offcourse, i would apreciated.

i have this problem on astra 23,5....12109H - hd channel

[triplexxx]

can any one haw a script for autostat cccam

[VFL]

well me 3 time patch after reboot no booting what wrong?

[nervis]

can any one haw a script for autostat cccam


go to /etc/init.d/bootup and add this line:

/usr/bin/CCcam (or with you have rename the binary file)

and reboot

[stevie1961]

can any one haw a script for autostat cccam
Install this file and it automatically starts.
enigma2-plugin-glasssysutil_2.39_mipsel.ipk

[triplexxx]

Install this file and it automatically starts.
enigma2-plugin-glasssysutil_2.39_mipsel.ipk

wher can i find this

[VFL]

Install this file and it automatically starts.
enigma2-plugin-glasssysutil_2.39_mipsel.ipk


where is all file from u getting?

[stevie1961]

wher can i find this

https://www.satpimps.co.uk/attachment.php?attachmentid=45959&d=1287740905

Page 75 of this thread

[richy18]

Again a small bug report from RTi 1.0.1 on Azbox Premium +

- Sound not fully fixed (got sometimes distorted sound or no sound - Resolution key fixed it)

- If sound is distorted or gone the HD stream will also stuttering

- RCU key doubling (pushed key one time and cursor moved two times) in some menus still exist. Changing ActionMap.pyo does not change anything.

- EPG still not working. CrossEPG also not working. The "trick" from hfmls (#2871) is not working for me. Only a small part of EPG appeared (10-20%) on Astra 19.2 East

- System time still to fast. The "trick" with installing a ntp daemon is not working for me. The ntp packet prevents Azbox booting. Booting hangs at 50%. Have to remove ntp packet.

- Strange characters in VFD while box is booting (photo at #2821)

- Sometimes enigma2 process hung while zapping (gears remained on screen, have to "killall -9 enigma2")

- Sometimes the gears appeared without any reason.

That's that I found so far...

[richy18]

i notice HD channels using 1080p resolution (didn't test with 720p) stutter just a little bit, anyone having this problem?

Sometimes yes - see #2912

[hfmls]

yeah i noticed HD stuttering but honestly didn't have any problem in audio.
that part for me it's ok.

[VFL]

Again a small bug report from RTi 1.0.1 on Azbox Premium +

- Sound not fully fixed (got sometimes distorted sound or no sound - Resolution key fixed it)

- Then sound is distorted or gone the HD stream is also stuttering

- RCU key doubling (pushed key one time and cursor moved two times) in some menus still exist. Changing ActionMap.pyo does not change anything.

- EPG still not working. CrossEPG also not working. The "trick" from hfmls (#2871) is not working for me. Only a small part of EPG appeared (10-20%) on Astra 19.2 East

- System time still to fast. The "trick" with installing a ntp daemon is not working for me. The ntp packet prevents Azbox booting. Booting hangs at 50%. Have to remove ntp packet.

- Strange characters in VFD while box is booting (photo at #2821)

- Sometimes enigma2 process hung while zapping (gears remained on screen, have to "killall -9 enigma2")

That's that I found so far...


yeah some me sound not fixed and more bug
i back to 1.0.0 fine

[richy18]

yeah i noticed HD stuttering but honestly didn't have any problem in audio.
that part for me it's ok.

ok - that's interesting. What kind of Azbox you own? Possibly the sound issue depends on box type?

[hfmls]

azbox hd elite, hispasat 30w.
80cm dish, LNB 2 way out.

[sattommy]

yeah some me sound not fixed and more bug
i back to 1.0.0 fine

Please tell which channels you have problems. Dit you try different channel list. I had problems with an older one. Newer one fixed them.

[VFL]

Please tell which channels you have problems. Dit you try different channel list. I had problems with an older one. Newer one fixed them.

on astar 2 Star Gold freq: 11261 h 27500 2/3

i alway watching this no sound,if i reboot no sound on old fim 1.0.30 work fine sound but this didnt come sound

most all astar 2 no sound

[richy18]

azbox hd elite, hispasat 30w.
80cm dish, LNB 2 way out.

ok - I have Premium +, Quad LNB dish (13.0, 19.2, 23.5, 28.2 east)

Sounds like:
Sound problem on Azbox Premium +
Sound OK on Azbox Elite

can anybody confirm this?

[kasukabe]

Sound Ok since more than 2 hours.. no problems with sound here.
AzBox Elite HD

[feedme]

ok - I have Premium +, Quad LNB dish (13.0, 19.2, 23.5, 28.2 east)

Sounds like:
Sound problem on Azbox Premium +
Sound OK on Azbox Elite

can anybody confirm this?


Sound problem also in premium. I have old version feb/march 2009.
Sometimes distortion after swapping to new channel. Distortion also appeared when cross epg was milling the data.
Anyway cross epg is not fully functional for me.
ALso ddamir text plugin doesn't get epg data correctly

EDIT:
Seems like least at 5w position transponders with high snr (92-94 %) have more distorted sound.

[richy18]

I've found two new bugs:

Volume Control: If I trigger the volume down to zero, the sound won't come to zero level. The volume bar shows me "zero" (no bar) but I still hear sound. A further reduction has no effect. The "mute" Button on RCU has no effect also.

Standby: If I turn the box into standby, the sound is sometimes gone after wakeup (Premium +). I have to switch to another channel and go back to get sound again.

[kooleracer]

can someone confirm trouble when switching from decoded HD channels to FTA HD channels?

[richy18]

can someone confirm trouble when switching from decoded HD channels to FTA HD channels?

No, I'm not. It worked like a charm on Premium +
Tested with zapping from NatGeo HD to ZDF HD and back

[bevste]

i did this to setup CrossEPG:

Enigma2 installation (dreambox)

with a unix compatible editor edit the file /usr/bin/enigma2.sh and before the line

LD_PRELOAD=/usr/lib/libopen.so.0.0 /usr/bin/enigma2

add this line

/usr/crossepg/crossepg_epgmove.sh



After reboot i went to download manually, then i reboot again, and EPG fully working.
:) :) :)
Now only clock gets crazy :)

Do you save your epg data to hard drive or Dom, I tried your trick but cant get epg to populate?

[VFL]

anyone know how option key on skysport info?

the check button alway going green screen and the green button keymap wasnt fixed

youtube not working older fw 1.0.31 fine

[T33]

Has anybody succeeded to install E2 on a USB stick with AZup?

I get the following error:

[xanadu]

RTi Core 1.0.1 Tested on Premium+

Audio still appears to break up or distort on SD channels after a while watching on same channel.

Some intermittent No Audio problem when switching channels.

Some lock ups causing stuck on the Gears and have to reboot during channel changing.

Much better than v1.0.0


Waiting for the Media Player Fix please! :)

[Sjaak66]

Has anybody succeeded to install E2 on a USB stick with AZup?

I get the following error:

With me it's running pretty smooth on usb. It's not like the dreambox but ok.
You have to be patiënt when using usb it'll take about 8 min even to install.
But it'll work.
I'll report later on.

[amyren]

- RCU key doubling (pushed key one time and cursor moved two times) in some menus still exist. Changing ActionMap.pyo does not change anything.

I have a plain Premium and replacing the ActionMap.pyo (and I copied the ActionMap.py file as well, since it came with the same download)
Did you use the file from post #2864?
Also note that you must reboot before the change takes effect.

[amyren]

I've found two new bugs:

Volume Control: If I trigger the volume down to zero, the sound won't come to zero level. The volume bar shows me "zero" (no bar) but I still hear sound. A further reduction has no effect. The "mute" Button on RCU has no effect also.

Standy: If I turn the box into standy, the sound is sometimes gone after wakeup (Premium +). I have to switch to another channel and go back to get sound again.

I can confirm the same with the volume, it doesnt turn off completely with the down button. And also it doesnt help - at that point - to press the mute button.
But if you want to mute, just press the volume up a bit first. Then press the Mute button, and the sound will be off.

Regarding standby, also sometimes the box will not start up after a standby. The display goes blank and no picture or sound.

[paulobr]

can anyone help me i can't wake up my azbox elite after stanby witch button i press? And the epg i can't put it work too i put the plugin and i only show the timeshift empty....
Thanks

[gabyam6]

I hava a Premium Plus, with RTi_Core_1.0.1.BETA
Some audio block when see HD channel
One question:
-SPDIF OUTPUT is only PCM. I have Marantz Amplifier (only SPDIF no HDMI)
Can I setup SPDIF on Azbox in RAW mode ?

Thanks

[sattommy]

@ALL

Regarding mediaplayer and youtube not working. We have found and fixed the bug. Will be released soon.

Regards,

Tommy

[eppie]

@ALL

Regarding mediaplayer and youtube not working. We have found and fixed the bug. Will be released soon.

Regards,

Tommy

Goed news Sattommy :applause-003: :applause-003:

[Smudger]

Has anybody succeeded to install E2 on a USB stick with AZup?

I get the following error:


I'm also had the error shown in your image.

08:09:06 > Connecting...
08:09:06 > Login...
08:09:07 > Login Success.
08:09:07 > Check rescue mode
08:09:07 > You have NEW kernel in your AZBox
08:09:08 > Rescue mode - OK
08:09:08 > Getting patch.bin ...
08:10:13 > Getting patch.bin - Done
08:10:13 > Creating Cramfs
08:10:16 > FW type : E2 by TheRipper
08:10:17 > Umount USB
08:10:17 > FW ver. : E2
08:10:17 > Creating Partitions...
08:10:24 > Creating Partitions - Done
08:10:25 > Formating Partitions...
08:10:54 > Formating Partitions - Done
08:10:59 > Preparing...
08:11:07 > Sending Cramfs ...

but noticed usb was still flashing so maybe still copying Cramfs.
Going to try another usb. I've ran from USB in the past using old method.

Tried a third USB device now working.

08:27:44 > Connecting...
08:27:44 > Login...
08:27:44 > Login Success.
08:27:44 > Check rescue mode
08:27:45 > You have NEW kernel in your AZBox
08:27:45 > Rescue mode - OK
08:27:45 > Getting patch.bin ...
08:28:51 > Getting patch.bin - Done
08:28:51 > Creating Cramfs
08:28:52 > FW type : E2 by TheRipper
08:28:52 > Umount USB
08:28:52 > FW ver. : E2
08:28:52 > Creating Partitions...
08:29:00 > Creating Partitions - Done
08:29:01 > Formating Partitions...
08:30:54 > Formating Partitions - Done
08:30:54 > Preparing...
08:30:56 > Sending Cramfs ...
08:31:26 > Sending Cramfs - Done
08:31:27 > Copying E2 kernel...
08:33:49 > Copy kernel - Done
08:33:49 > Copying E2 files...
08:38:04 > Copying E2 files - Done
08:38:04 > Finalising Installation
08:38:06 > Removing tmp files...
08:38:07 > E2 installed successfully.
08:38:07 > Rebooting... after ~5sec

[dvlajkovic]

I believe that the reason for having those 'turning wheels' while zapping channels lies in the simple E2 feature: it runs a TP scan in background, sometimes resulting in numerous 'test' channels, data channels, etc.
This often causes an endless loop to E2, resulting in box freeze -no response to RCU.
A solution would be to implement into E2 a new option to Enable/Disable background scanning of TPs (like the one in PLi image for Dreamboxes).
Btw. another reason for box freeze might be the various channel lists that beta-testers upload into AZboxes - many are overloaded with tons of similar TPs or simply outdated (take a peek with some channel editor -you'll be surprised what a mess you'll see there!).
I'd strongly suggest that we come out with a unique list with updated TPs for the two major sats, Astra 19.2E and Hotbird 13E, and stick to them while testing E2. Everything else will go too far to successfully track down possible causes of stuttering, freezes, etc.

[paulobr]

@ALL

Regarding mediaplayer and youtube not working. We have found and fixed the bug. Will be released soon.

Regards,

Tommy

Thanks man you are the best i'm waiting for the media player since the begin.

Regards from Portugal

[massimo1167]

Has anybody succeeded to install E2 on a USB stick with AZup?

I get the following error:
Yes of course.
Try to delete partition and reformat usb pen drive and try again.
How big is the pen drive?

[leerock]

What's the idea of installing e2 on pendrive?

I mean,
Is it possible to leave the official fw on dom and install e2 on pendrive?
Does it install a bootloader that will let me choose what fw I want to load?

I m asking this coz before using azup, you must first place the pendrive on the box and do an update..

I don't think this would leave the dom untouched, with the official fw on it...
Am I right?

[hfmls]

yes it means u can leave dom untouched and use pendrive to boot enigma2.
no you can't chose wich to load.
if u wanna bot from dom original firmare again u just have to copy kernel.

[pocopelo]

question in DVB-T in azbox-elite, thanks:respect-020:

[hfmls]

pocopelo .... no dvb-t in changelog...so, no dvb-t

[amyren]

yes it means u can leave dom untouched and use pendrive to boot enigma2.
no you can't chose wich to load.
if u wanna bot from dom original firmare again u just have to copy kernel.

One useful thing that installing to USB drive would be if you already have a E2 thats working in your DOM (what does D.O.M stand for anyway?) and then be able to install a new image on USB for testing it without messing with your setup.
But is this possible today, have eg. 1.0.0 beta in DOM and 1.0.1 on USB and choose between them simply by plugging or unplugging the USB drive before reboot?
This is getting quite close to the multiboot feature found on the Dreamboxes.

[halabessa]

I believe that the reason for having those 'turning wheels' while zapping channels lies in the simple E2 feature: it runs a TP scan in background, sometimes resulting in numerous 'test' channels, data channels, etc.
This often causes an endless loop to E2, resulting in box freeze -no response to RCU.
A solution would be to implement into E2 a new option to Enable/Disable background scanning of TPs (like the one in PLi image for Dreamboxes).
Btw. another reason for box freeze might be the various channel lists that beta-testers upload into AZboxes - many are overloaded with tons of similar TPs or simply outdated (take a peek with some channel editor -you'll be surprised what a mess you'll see there!).
I'd strongly suggest that we come out with a unique list with updated TPs for the two major sats, Astra 19.2E and Hotbird 13E, and stick to them while testing E2. Everything else will go too far to successfully track down possible causes of stuttering, freezes, etc.
@ the Ripper & team:
Would you please try to implement "Disable scanning of TPs" in next release... so we can even use the box without having the green screen error specially when we power it on without beeing connected to internet.
Thank you again for your great efforts.:respect-046:

[paulobr]

Picons are enable?

[tx0]

this fw is for FTA or for hackers cause CI and card reader are non functional.. picons.. haha.. this is just pathetic to fix up picons while basic features are not implemented.

[hfmls]

lol what? ...
picons work since many releases ago. (matrix10 theme/skin)
and i am using DSteam 3.0.1 release and TVmode is just perfect for me using cccam 2.1.1.

why da hell do u say it is just for hackers and FTA? makes no sense.

[leerock]

why da hell do u say it is just for hackers and FTA? makes no sense.


He means that since card reader is not working, you can't use an official card, so you re decrypting channels only via cardsharing...

[hfmls]

i use azbox to connect to my dm500 as a client..dm500 being server...so.

[rtificial]

He means that since card reader is not working, you can't use an official card, so you re decrypting channels only via cardsharing...

Yes, but what is illegal about using a local CCcam server for providing the card to your AZBox?
It's relatively easy to set up, and allows you to use the current firmwares for decrypting channels from your subscription card.

[hfmls]

lol......come one, u guys can't be serious ... :) what's the big deal about cardsharing ?
yeah i have dm500 as a server with full paid card...and azbox as a client connected to it ...

but who cares about cardsharing? signal is free...i do whatever i want with it inside my house. :P

[tx0]

IMO Ripper and his team are stuck. With all my respect that was a summer breakthrough - running e2 on azbox and now its over. Now we have almost no improvement. Where is that promised CVS/SVN server? soon? Sorry guys but Enough of this. Guess the next version will be 'Fan ON/OFF fix'.

[dvlajkovic]

Jeez, 'enough of what'?! Dude, leave Ripper and the Team be...
They owe ya nothin' and got no obligation to follow your (nor anybody else) deadline..

[hfmls]

IMO Ripper and his team are stuck. With all my respect that was a summer breakthrough - running e2 on azbox and now its over. Now we have almost no improvement. Where is that promised CVS/SVN server? soon? Sorry guys but Enough of this. Guess the next version will be 'Fan ON/OFF fix'.
tx0 go throw yourself over a bridge.
what a bunch of disrespectful statement and a bunch of BS!
How da hell can u say that!? Did u even tested it?

Enough of this? Get the hell out of this thread/topic and leave the "not enough of this users".

[leerock]

IMO Ripper and his team are stuck. With all my respect that was a summer breakthrough - running e2 on azbox and now its over. Now we have almost no improvement. Where is that promised CVS/SVN server? soon? Sorry guys but Enough of this. Guess the next version will be 'Fan ON/OFF fix'.

It s just that, what they ve done in the summer was the easy part...
Now it s the hard part (fixing bugs)...
Sure, the improvement is going to be a lot slower but we ll never get the "fan on/off in one month" kind of development..
At least, till we have a stable fw...

On the other hand they do not owe us nothing, do they?

[tx0]

just a q...

Why do you think all opensat fw development was frozen right after this azbox e2 firmware was released?

[hfmls]

Are you guys serious ??? U simply don't have a clue about the hardwork The_Ripper and team are having. Easy part !?
The_Ripper had to make drivers from scratch, then STC timmer wich took him about 2 weeks to get done, what da hell do u want more? Now with time and rest, it's point and shoot bug! That's LOGIC!

[hfmls]

just a q...

Why do you think all opensat fw development was frozen right after this azbox e2 firmware was released?

Please do enlighten us!
Also please do a better release than The_Ripper's one.
If you can't do it, stop flaming precious work,time and patience from coders with those kind of nothing but stupid posts.

Have some dignity and say THANK YOU The_Ripper and team. They don't owe you sh*t.

Errr...cya later.

[rtificial]

IMO Ripper and his team are stuck. With all my respect that was a summer breakthrough - running e2 on azbox and now its over. Now we have almost no improvement. Where is that promised CVS/SVN server? soon? Sorry guys but Enough of this. Guess the next version will be 'Fan ON/OFF fix'.


Quite disrespectful in my opinion, but hey, it's a free world, right?

In my opinion these guys have realized huge improvements since the first proof of concept. For example, the improvement on the drivers is very impressive.
Stability is improving step-by-step.

But again, who am I to criticize your opinion.

[tx0]

Please do enlighten us!
....
Errr...cya later.


Well I think you know that better. Just check your private
messages to me before e2 was released.

[stevie1961]

lol what? ...
picons work since many releases ago. (matrix10 theme/skin)
and i am using DSteam 3.0.1 release and TVmode is just perfect for me using cccam 2.1.1.

why da hell do u say it is just for hackers and FTA? makes no sense.

What are the benefits of the DS image over the original?
Sattommy said earlier that there will be a new release shortly with mediaplayer fixed.
I dont know weather to wait for the fixed beta

[hfmls]

Yeah, so ? Everybody knows by no the situation.
That doesn't have nothing to do with the fact that you come here 99% sure without testing latest release and starting saying that only FTA working and it's for hackers and they now release stuff like fan off/on?

Do u ever read changelogs?
STC timmer was added!
VDF support added!
EPG support plugin added!
now they are working on recording and internal card reader...

Now if that's small peas for you.......well...i dunno what to say.

[leerock]

Are you guys serious ??? U simply don't have a clue about the hardwork The_Ripper and team are having. Easy part !?
The_Ripper had to make drivers from scratch, then STC timmer wich took him about 2 weeks to get done, what da hell do u want more? Now with time and rest, it's point and shoot bug! That's LOGIC!

No,
You are the one that doesn't know what he s talking about...
If you read my post carefully you ll know what I meant with the word easy...

It's not that anyone could do this ( in fact I think that the ripper is the only one that could succeed on this)

All I meant by the word easy is ( a less time spending procedure)
Fixing bugs is a lot more time spending procedure and any developer can tell you this...

[hfmls]

What are the benefits of the DS image over the original?
Sattommy said earlier that there will be a new release shortly with mediaplayer fixed.
I dont know weather to wait for the fixed beta

don't use DSteam image! Some bugs and after reboot stops booting forever :)

[hfmls]

No,
You are the one that doesn't know what he s talking about...
If you read my post carefully you ll know what I meant with the word easy...

It's not that anyone could do this ( in fact I think that the ripper is the only one that could succeed on this)

All I meant by the word easy is ( a less time spending procedure)
Fixing bugs is a lot more time spending procedure and any developer can tell you this...

Yes you're right. That's not harder or easier, it takes more time :)
Either way i think we all agree this first BETA is pretty damn usable and stable, for exception of tx0.

And step by step The_Ripper would kill bugs.

[GOG]

Yes you're right. That's not harder or easier, it takes more time :)
Either way i think we all agree this first BETA is pretty damn usable and stable, for exception of tx0.

And step by step The_Ripper would kill bugs.
No, it's not stable at all. You're running one satellite, I'm running 16 with one uncommitted and four committed switches.

I get the lockup/freezing with the gears running the whole time when zapping.

Don't take me wrong here, I know this is only a beta and I think these guys have done a lot in a short period of time.

But stop assuming what the rest of us agree with

[hfmls]

Ok i apologize for that, i only use hispasat and it works perfect.

[MoGaZz]

It's not working for me as well. I keep getting this green screen when booting after install.
Just to be clear, I'm not criticizing, it's still a beta version.

[ebro]

Guys, everytime you reply to someone's post dissing the work that Ripper and team are doing, you are increasing their fun of winding you all up.
If you don't reply they won't have the ammunition, and maybe, just maybe, this thread might stay a little smaller.

[kebien]

hfmls
Of course it does work for you,the main problem is you keep on talking on behalf of developers and all users (IT DOES COME OUT THAT WAY),and they have their own mouth and hands to defend themselves if they need to.

We already know about your enthusiasm and was discussed before in this same thread.

You must understand the logic behind tx0 reference is that just MIGHT be a point where development can get stuck because (and this is only one situation) microcode for certain features from sigma might not be available,or is badly designed or written to be able to build and efficient driver or implement a function.
It is a very valid point,in my view,regardless is written in sour words.
You must also try to understand the concept : sigma might not have designed the perfect SOC,this mean you will never have a perfect box.

You must stop jumping on everyone that decide to post negative remarks or suspicions when can be well founded.
You have no arguments more than what you read here,other people might know a lot more about the subject than yourself.
Most people with little knowledge think this is easy,and you know better,let them cry if they want to.

[GOG]

It's not working for me as well. I keep getting this green screen when booting after install.
Just to be clear, I'm not criticizing, it's still a beta version.
Try installing with another USB stick. One more thing is that you safely remove the stick after you've copied the patch file to your stick (right klick on the icon in your task bar). Don't just rip it out after you're finished.

If you're running XP, be sure that the "removable media" icon in the taskbar is gone before you take the stick out. XP doesn't inform the user when it's safe to remove, Vista and Win 7 do.

I had the same phenomenom, another stick made it for me.

[halabessa]

It's not working for me as well. I keep getting this green screen when booting after install.
Just to be clear, I'm not criticizing, it's still a beta version.

For All GUYS getting green screen when booting after install....
THE REASON is that your box must stay connected to internet or your router to make this green screen disapear.... it seems that a "background scanning of TPs" is running in background of fw while booting.
dvlajkovic did already mentioned it in a previous post.:sifone:

[GOG]

For All GUYS getting green screen when booting after install....
THE REASON is that your box must stay connected to internet or your router to make this green screen disapear.... it seems that a "background scanning of TPs" is running in background of fw while booting.
dvlajkovic did already mentioned it in a previous post.:sifone:
Background scanning of transponders has nothing to do with the internet. The background scanning only affects the transponder you're using when you look at a channel.

[peterpau]

Ok i apologize for that, i only use hispasat and it works perfect.

Hi
HD channels working with our bad pixels? How to?

[kooleracer]

for people that having problem with the BETA version, just stop using e2 beta and wait when the release candidate or version 1.0 comes out. Because every update there are people nagging about can't install or E2 is not booting if you can't fix your problems by yourself or don't know what FTP telnet or DHCP is you are not ready to use a beta. Many of your problems aren't BETA errors but your errors !!!!

And for people who don't appreciate the work of ripper don't comment anymore just keep it to yourself and use AZbox FW dont bother us with your silly comments on this forum!!!



AND YES DVB-T AND DVB-C ARENT SUPPORTED RIGHT NOW STOP ASKING ABOUT IT OVER AND OVER AGAIN!!!!!

ONTOPIC:great job the fixes are really working when E2 is finished to AZbox will be a real mediacenter!

[Carp95]

He means that since card reader is not working, you can't use an official card, so you re decrypting channels only via cardsharing...

Yes and ity doesn't work with official DMM images on all DMM models.

You guys have lost the whole point off this image.

Tested DS 3.01A on my Premium:

Tested:

19,2 east canal digitaal NL ---> SD 100%
19,2 east Sky Germany ----> SD 100% - HD 99% - German sound OK when selecting english audio track No sound everywhere needs reboot
28,2 east Sky UK --------> SD 100% - HD 100%
13 east - Sky IT ---------> SD 100% - HD 99% - changing audio track results in No sound everywhere needs reboot
13 east - Cyfra+ ----------> SD 100% - HD 99%- changing audio track results in No sound everywhere needs reboot
23,5 east - canal digitaal NL--> SD 100% - HD no sound change back to SD no sound needs reboot


All with CCcam 2.14 from addonserver.

Lots off spinners coming up don't know why; background scanning? loading epg?

So for me there has to be a audio fix and the spinners can get realy frustrating

So far a very good job, keep it up guys

[halabessa]

Background scanning of transponders has nothing to do with the internet. The background scanning only affects the transponder you're using when you look at a channel.

Ok, maybe you are right.... but for me I had the same problem then when I connect the box to internet & make a reboot.... the green page disapear.

[richy18]

The announced bugtracker is now online:

http://www.azbox-enigma.eu/bugtrac/

So, report your bugs please. The more you report the faster the development will be :302:

[valerica]

Yes and ity doesn't work with official DMM images on all DMM models.

You guys have lost the whole point off this image.

Tested DS 3.01A on my Premium:

Tested:

19,2 east canal digitaal NL ---> SD 100%
19,2 east Sky Germany ----> SD 100% - HD 99% - German sound OK when selecting english audio track No sound everywhere needs reboot
28,2 east Sky UK --------> SD 100% - HD 100%
13 east - Sky IT ---------> SD 100% - HD 99% - changing audio track results in No sound everywhere needs reboot
13 east - Cyfra+ ----------> SD 100% - HD 99%- changing audio track results in No sound everywhere needs reboot
23,5 east - canal digitaal NL--> SD 100% - HD no sound change back to SD no sound needs reboot


All with CCcam 2.14 from addonserver.

Lots off spinners coming up don't know why; background scanning? loading epg?

So for me there has to be a audio fix and the spinners can get realy frustrating

So far a very good job, keep it up guys

This is a problem with sound when you select another track than 1st one :
1 west : Canal digital nordic - no sound when changed between audio chnls .

Cheers ,
Val .

[MoGaZz]

@GOG
I’ll try with another USB stick, but I honestly don’t think that’s the problems, since I've always removed my usb sticks correctly.

@halabessa and @GOG
So the problem should be an internet connection or a working satellite connection(TP scan)? Because I have none right now! I just moved into a new house hehehe…

@kooleracer
I disagree with you. There’s a big difference between giving feedback or just complain about something.

[paulobr]

i did this to setup CrossEPG:

Enigma2 installation (dreambox)

with a unix compatible editor edit the file /usr/bin/enigma2.sh and before the line

LD_PRELOAD=/usr/lib/libopen.so.0.0 /usr/bin/enigma2

add this line

/usr/crossepg/crossepg_epgmove.sh



After reboot i went to download manually, then i reboot again, and EPG fully working.
:) :) :)
Now only clock gets crazy :)

Can anyone share this file i don't know change the file please.
Thanks,

[moicas3004]

Guys, remember to use the bug tracker to input the bug's. This will help the team to solve them quick and also to now what to do.

PS: Before reporting a bug, first read if your bug isn't already reported.
Also, that is not a forum, so limit your self to to bug report, not to chat.

http://www.azbox-enigma.eu/bugtrac/

[satdish101]

whats the easiest way to convert azbox dvbs.dat file to satellite.xml so you can keep current sat/transponder data for use with E2?
Telesat's AZBoxedit could go from satellite.xml -> dvbs.dat which was great for factory firmware but now need to go in reverse :)

[antonis13]

Quote:
Originally Posted by hfmls View Post
i did this to setup CrossEPG:

Enigma2 installation (dreambox)

with a unix compatible editor edit the file /usr/bin/enigma2.sh and before the line

LD_PRELOAD=/usr/lib/libopen.so.0.0 /usr/bin/enigma2

add this line

/usr/crossepg/crossepg_epgmove.sh



After reboot i went to download manually, then i reboot again, and EPG fully working.

Now only clock gets crazy


Can anyone share this file i don't know change the file please.
Thanks,

take the file

[waxfuzz]

For people can't see their usb drive

Type this command in telnet for see your hardrive sda

sfdisk /dev/sda -l


root@AZBox:~# sfdisk /dev/sda -l

Disk /dev/sda: 60801 cylinders, 255 heads, 63 sectors/track
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0

Device Boot Start End #cyls #blocks Id System
/dev/sda1 0+ 60800 60801- 488384032 c W95 FAT32 (LBA)
/dev/sda2 0 - 0 0 0 Empty
/dev/sda3 0 - 0 0 0 Empty
/dev/sda4 0 - 0 0 0 Empty

Then go to ftp /etc/

Edit fstab file and you will see something like that:


rootfs / auto defaults 1 1
proc /proc proc defaults 0 0
devpts /dev/pts auto mode=0620,gid=5 0 0
usbfs /proc/bus/usb usbfs defaults 0 0
tmpfs /var tmpfs defaults 0 0
tmpfs /tmp tmpfs defaults 0 0
/dev/hda2 /boot auto rw 0 0
/dev/hda3 swap swap defaults 0 0
/dev/hda5 /media/cf auto defaults 0 0
/dev/hdb1 /media/hdd auto defaults 0 0
/dev/sda1 /media/usb auto defaults 0 0]


Then change in /media/usb your sda device /dev/sda1 or sda2 sda3 sda4

[bevste]

Quote:
Originally Posted by hfmls View Post
i did this to setup CrossEPG:

Enigma2 installation (dreambox)

with a unix compatible editor edit the file /usr/bin/enigma2.sh and before the line

LD_PRELOAD=/usr/lib/libopen.so.0.0 /usr/bin/enigma2

add this line

/usr/crossepg/crossepg_epgmove.sh



After reboot i went to download manually, then i reboot again, and EPG fully working.

Now only clock gets crazy



take the file

Cheers for the file, dont know what I was doing wrong but have now got it working! Only wants to work with XMLTV files not opentv! So far Sky uk and Sky Italia loaded with some gaps on Italia, gonna try some more later. Cooltv guide looks cool!:)

[tx0]

@ebro

I'm not dissing anyone here. What I'm trying to tell is
while trying to fix 'fan off in standby' important bug there are some other basic major issues that weren't even mentioned on that bugtrack site. everyone know what are they. Ok. Its easy to say, Who am I and who is the_Ripper that doesn't owe me anything. I don't owe anyone here as well, k?
Now lets skip all these emotional remarks from hfmls and others and be unbiased. Just a theory - It could be very convenient for opensat to hire some guys that do some development, to get rid of their responsibilities for fw while keeping the sales up. If all this azbox-e2 stuff is just enthusiastic fun why don't you open the code for other people to get involved?

please skip all that 'you don't respect bla bla' comments for God sake you'll be wrong

[rtificial]

@ebro

I'm not dissing anyone here. What I'm trying to tell is
while trying to fix 'fan off in standby' important bug there are some other basic major issues that weren't even mentioned on that bugtrack site. everyone know what are they. Ok. Its easy to say, Who am I and who is the_Ripper that doesn't owe me anything. I don't owe anyone here as well, k?
Now lets skip all these emotional remarks from hfmls and others and be unbiased. Just a theory - It could be very convenient for opensat to hire some guys that do some development, to get rid of their responsibilities for fw while keeping the sales up. If all this azbox-e2 stuff is just enthusiastic fun why don't you open the code for other people to get involved?

please skip all that 'you don't respect bla bla' comments for God sake you'll be wrong

Obviously, it has been confirmed this team is supported by OpenSat. See releasenotes of last firmware version.
Without this, it would probably be pretty much impossible to rewrite the drivers. This is also one of the reasons why these driver will remain proprietary.
The bugtrac system was opened today, and is only partially filled with the current bug reports so far. The current status of the firmware is still quite premature in my opinion, but a huge step forward since the first proof of concept.
I think for most users here, including me, I could say "Hope dies last". Obviously you have no confidence in this, which is absolutely fine. Either be satisfied with the current capabilities of your azbox, wait for improvement of these capabilities or sell your box and take your loss.
This thread is intended primarily for those who have faith in development of a functional E2 firmware for their azbox and I see no reason why you should barge in here to spoil this for anyone with your comments.
As I mentioned before, it's a free world, but there are probably places to find with souls more alike than in this thread.

[kooleracer]

In RTi core Beta 1.0.0 ripper thanked opensat, does anyone know what opensat give the ripper?

In what way is opensat involved in rippers work since RTi core 1.0.0?

[T0rca1950]

In RTi core Beta 1.0.0 ripper thanked opensat, does anyone know what opensat give the ripper?

In what way is opensat involved in rippers work since RTi core 1.0.0?

I really think that is none of our business.

[kooleracer]

I really think that is none of our business.

Please, dont answer my question with your crap !

If you don't want to know just don't say anything....

Why is this forum getting polluted with people like YOU :banghead:

[Sjaak66]

@ebro

I'm not dissing anyone here. What I'm trying to tell is
while trying to fix 'fan off in standby' important bug there are some other basic major issues that weren't even mentioned on that bugtrack site. everyone know what are they. Ok. Its easy to say, Who am I and who is the_Ripper that doesn't owe me anything. I don't owe anyone here as well, k?
Now lets skip all these emotional remarks from hfmls and others and be unbiased. Just a theory - It could be very convenient for opensat to hire some guys that do some development, to get rid of their responsibilities for fw while keeping the sales up. If all this azbox-e2 stuff is just enthusiastic fun why don't you open the code for other people to get involved?

please skip all that 'you don't respect bla bla' comments for God sake you'll be wrong

What is your problem mate ? As far as I know all of this is for free/hobby. What will be the problem if the ripper & co get something payed for it ? At the end they are doing the job, I don't have to pay so.... I try and give my contribution by reporting bugs I notice important or not.

[bevste]

Maybe its just me but I dont give a **** what level of involvement Opensat have in this project, as I said before they have been remiss in their responcibilitys but what MOST people want in this thread is a decent firmware for this box! The Ripper & co are getting there bit by bit! There is some way to go but with a bit more time it is gonna be way better than official firmware! I would suggest people who are not likeminded should go irritate another forum!!

[T0rca1950]

Please, dont answer my question with your crap !

If you don't want to know just don't say anything....

Why is this forum getting polluted with people like YOU :banghead:

Hehe, you are talikng crap, not me.

Why should you know that? Is that something that will help you with some work so that you can contribute to this project? Or is it just a dumb question to satisfy your curiousity?

So, please tell me, why is that important right now?

[ebro]

Calm, calm, calm, calm calm.... Do not rise.......

[satdish101]

wow, surprised by some of the feedback here. While lots of interesting speculation can be made with cease of factory firmware releases with simultaneous rapid dev of E2, why does anyone care whether opensat is intimately involved or just passively assisting? would anyone prefer the alternative and the factory firmware updates which advanced the platform very little? As AZBox owners, we have an opportunity to have software which can utilize the strength of the hardware and that is what should matter most. I'm personally thankful to the_ripper and team and to Opensat for whatever assistance they are providing.

[hfmls]

Hi
HD channels working with our bad pixels? How to?

hd channels work ok, nod bad pixels, BUT i have a problem watching football or ice hokey (or many movement).
It behaves like an old PC running 1080p movies. It kind of stutters if u know what i mean.

[leif666]

I assume that 3000 post in one thread shows that there are very many dedicated people who are happy about the job being done to our AZBox right now :woot-035:

Good idea to start the Bug Tracker on azbox-enigma.eu