PDA

View Full Version : Enigma 2 by The_ripper - TEST -


Pages : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 [15]
damo
29-01-2011, 12:35 AM
the problem of standby is finally resolved?
DragontearS
29-01-2011, 12:39 AM
witch stand by problem?
damo
29-01-2011, 01:00 AM
if the box is on standby for a few hours ,later, trying to turn it will reboot... have you a solution?
sectorNOlimits
29-01-2011, 01:22 AM
if the box is on standby for a few hours ,later, trying to turn it will reboot... have you a solution?

With RC3 you have to disable scheduled download of CrossEPG.

[EDIT] Standby will work, but clock will be slower a bit. Half an hour in 8/10 hours.
SNL
nstergi
30-01-2011, 12:10 PM
hi

just a noob question....

are we still limited to maximum 1 Tb HDD with enigma 2 as the same with original fw or it has nothing to do with software????

thanks
numark0504
30-01-2011, 03:10 PM
does somebody know how to stop playback of a record. when i go to the recordet files ( guide key on remote control) and start playing, i can´t stop the playback....has somebody a solution?
zeini
30-01-2011, 03:54 PM
Try do press resolution-button.
numark0504
30-01-2011, 04:20 PM
Try do press resolution-button.

it works, thank you....
numark0504
01-02-2011, 05:09 PM
is it possible to change the signal quality from % to dB ? i habe an azbox elite. when yes, is it the same way as on the dm800 ( edit skin.xml...)?
numark0504
03-02-2011, 06:27 PM
is it possible to automount a smb s hare on startup, i had no success with the bootup file, first it works and suddenly ist doesnt work any more....i havent changed something.... or is a mount manager available?

has somebody success with the automount with bootup?
sectorNOlimits
03-02-2011, 06:42 PM
is it possible to automount a smb s hare on startup, i had no success with the bootup file, first it works and suddenly ist doesnt work any more....i havent changed something.... or is a mount manager available?

has somebody success with the automount with bootup?

I've inserted a line in /etc/fstab so each time the system bootup it automatically mount what I need.

have a look here:
https://www.satpimps.co.uk/showpost.php?p=782515&postcount=39

SNL
numark0504
03-02-2011, 06:51 PM
works perfect :respect-055::respect-055::respect-055:
numark0504
06-02-2011, 06:20 PM
Recovery procedure
__________________


* For all people which have a problem with fleshing Enigma 2 in AzBox , where installation stop ~58% and now have a BOOTING message on display.

You will need :

- Application Acronis True Image

- E2Backup.tib

- External HDD case with IDE controller ( or if You are working on PC, Motherboard which have IDE controller ) .

Take the DOM from AzBox and connect it with IDE connector from Your external usb case for HDD .

Connect the red wire from power cable ( 4-pin Molex connector ) from case ( +5V ) ( picture: Molex and pwrcom ) with right oriented pin on connector which is on DOM - pictures DOM1 and DOM2

Connect USB cable from the HDD case with Your PC.

Now, startup Acronis True Image application, and choose Recovery from the menu on right side - picture 1

Choose Disk Recovery on the top of the window and load file E2Backup.tib and press next - picture 2

Choose Recover whole disk and partition and press next - picture 3

Check-all whole Disk, so it means two partitions : Ex** and Linux Swap and press next - picture 4

Choose on which disk You will restore content, in our case DOM, and press next - picture 5

Commit with OK - picture 6

Choose Proceed - picture 7

Wait for few minutes that process complete - picture 8

When the restore of data and partitions finish, press Ok - picture 9

now You can exit from application, 'Safely' eject Your external USB HDD, in our case DOM.

Disconnect usb cable, and put back the DOM on AzBox, turn on AzBox and wait for 20 seconds that E2 boot.

Now you can take a look on enigma, and when You decide to go back on Official version of Firmware, that You can do with plugin from DDdamir.

Installation od DDamir plugin is described in another tutorial.



hxxp://rapidshare.com/files/407099608/Recovery.rar.html

rgs,

has somebody this archive yet? please upload ist again
milytres
08-02-2011, 12:29 AM
Hello,

Can I connect the card AZboxHDpremium + Freeview on PCIE PC so you can test?

Greetings.
MoRpHiUS_x
08-02-2011, 03:09 AM
has somebody this archive yet? please upload ist again

What version of E2 have installed?
rudiniiwwa
14-02-2011, 03:00 PM
What version of E2 have installed?

I have RTi core RC4, but stock on booting. I try recovery procedure with acronis. On PC acronis told me 100% ok, but when i plug DOM to azbox=booting problem still exist. I try to connect putty by pl2303 rs232=usb on 115200 with this result=

żHJ˝ÓÔ*úż!)żŻ*ëĺ7%şżŻÖű '
'š;;557=JZĺy˝ľľľľľľľľľľľľľľľľľľľľ ľľľľľľľľľľľľľľľľľľŢoíË}=ż
(Ę_5ż5'š;;557=5 Łĺ덿y!#3-1-!#żŻ9/-ż--!#ż*ĺ덿żżżU5żi{żw[}eż=ż=9)Łĺ덿żżżY!Og!=żŁeo5Ą3'=/żŻ*ż%=57ż!ż9Łĺës!#7żOucSż;'!9)ż=ż 9Łĺëy_Uż9'!9)ż35#9
żŁeo'!9)ż35#9
A9Ż3A9Ż3żż=ż9!#!'5Łĺë{!=żmwŁżťuĺë y/-ż[5--!#żżŁŁże=9/57ŁĺëY5-#1żżoĄQż3OucSż;'!9)ż=ż9ŁĺżY5-#1żYMYygiż=9')A%ż!żŁĺëżżY5-#1żYMYygiż/ŁĺëżżY5-#1ż_{ż753='ż-%-#1ż!żŁĺëżżY5-#1ż_{ż-%-#1ż!żŁĺëżżY5-#1ż_{żU5ż-%-#1ż!ż3ŁĺëżżY5-#1ż_{ż-%-#1ż!żżmeżmYżUY{ż_ymw5_ymw5żYy}[wĺëżże}yż5ĺëżż_ymżm[]żĺëżżżżmwYugżżmcW}Żš*żÚcW{Żš*żÚcW yŻš*żÚcWwŻš*żĺëżżżżmwYugżżmcW}Żš* żÚcW{Żš*żÚcWyŻš*żÚcWwŻš*żĺëżżY%== ż-#ż=-1#%5#ĺëżżżżassż-#ż
żĺëożżżSż-#ż
ż!ż ŁĺëűËŐ-#1żży'5=#żw--75ż!żo
ŁĺëżżY5-#1żży'5=#żw--75ż!żo
ŁĺëżżY5-#1żży'5=#żw--75ż!żo
ŁĺëżżY5-#1żży'5=#żw--75ż!żo
Łĺëű}ľ
ý7-7==ż
żĄĺëűŤőm]}żq_maż%!75Ą7-7==ż
ż5ĄĄĺëűMý;'!9)ż5-#1ż9!%'557Łĺ뎪#7ż5--#1ż%5%931żw[}eŻ*§żw[}eż=żĄĄĄŁĺëw53='ż;!!ż-#75żĺëVNO¤¤iúŰ
Íeý-%=15ż=ż9żŻ*żŁ§ż-!#7Łĺë[aesYż3!#7ż=ż9§żS!'%5ż#=%5ż
=%!#AuYAŁ;-#żŻ=ż9ż555ż*ĺëżży/59)-#1ż#1żA'!=7A
żA'!=7ż3!żŁŁżXZy˝űË˝59)-#1ż żŁŁĺëyy˝^^ŢŻĺĺë卍ŤŤŤŤŤŤŤŤŤŤŤŤŤŤŤ ŤŤŤŤŤŤŤŤŤŤŤŤŤŤŤŤŤĺĺë卿M}eacż[aeże!#-!ĺë卿[5--!#żĽYmqe}wuYmqcYĽżż9!75żĽ§żĽĺĺëĺ5 7ż7==żĽ§ż_yżĽĺĺëĺ]¤˘i*Şşż=;'5żą=ż5-Łż}3557ż=ż=żM}eacż9!%%=#7ż=#7ż559 57Łĺĺëĺ_żyyżŻ!7!ż{[u}i*!ż;!!ĺĺëĺżżżżżżżżżżżżĽĽĽżż-''ż3=-'ż-/ż[eA{UYMĺĺëĺżży/59)-#1ż
;!!ż-1#=ŁŁżż-ąż#!ż
;!!ż3-'5Łĺĺëĺużm#5'§ż9!75ż
ż33333333ĺĺëĺS_YXŹ°

Can somebody help me? śó
PS sorry for my english
voki081
14-02-2011, 03:19 PM
Baud rate 11520 or
Try to reverse TX and RX pin
rudiniiwwa
14-02-2011, 03:35 PM
Baud rate 11520 or
Try to reverse TX and RX pin

When I reverse Tx and Rx is not working.
zeini
14-02-2011, 04:44 PM
@rudiniiwwa:
Try an other cable. You have not enough level at your serial cable. Try a cable as this (http://www.myazbox.de/forum/index.php?page=Attachment&attachmentID=2008)
voki081
14-02-2011, 07:37 PM
When I reverse Tx and Rx is not working.

Did you selected right speed (115200) in Putty?
rudiniiwwa
14-02-2011, 07:54 PM
ok I have new cable and now is :

Setting up Clean Divider 2 to 96000000Hz.
Setting up Clean Divider 4 to 33333333Hz.
Setting up Clean Divider 5 to 25000000Hz.
Setting up Clean Divider 6 to 20000000Hz.
Setting up Clean Divider 7 to 20000000Hz.
GPIO dir/data = 0x76000038/0x76000000
UART0 GPIO mode/dir/data = 0x6e/0x00/0x00
UART1 GPIO mode/dir/data = 0x6e/0x00/0x00
XENV block processing completed.
Found existing memcfg: DRAM0(0x08000000), DRAM1(0x08000000)
Heap/Temp/Temp1/Dest start at 0x14000000/0x16000000/0x15000000/0x12000000.
Default boot index: 0
Scanning ROMFS image at 0x8c040000 (0x48040000) .. Found.
ROMFS found at 0x8c040000, Volume name = YAMON_XRPC
Found 1 file(s) to be processed in ROMFS.
Processing xrpc_xload_yamon_ES4_prod.bin (start: 0x8c040090, size: 0x0002fe84)
Checking zboot file signature .. Not found.
Trying xrpc_xload format .. OK
Checking zboot file signature at 0x13000000 .. OK
Decompressing to 0x91200000 .. OK (453328/0x6ead0).
Load time total 173/255 msec.
Execute final at 0x91200000 ..



********************************* *
* YAMON ROM Monitor
* Revision 02.06-SIGMADESIGNS-01-2.8.0.1
********************************* *
Memory: code: 0x11000000-0x11040000, 0x11200000-0x11204000
reserved data: 0x11240000-0x12440000, PCI memory: 0x12440000-0x12840000
Environment variable 'start' exists. After 1 seconds
it will be interpreted as a YAMON command and executed.
Press Ctrl-C (or do BREAK) to bypass this.

xosPe0 serial#b368b1126ee60d044a683e91cb c18f42 subid 0x50
xenv cs2 ok
xosPe0 serial#b368b1126ee60d044a683e91cb c18f42 subid 0x50
xenv cs2 ok
power supply: ok
dram0 ok (8)
dram1 ok (9)
zboot (0) ok
>
********************************* *****
* SMP863x zboot start ...
* Version: 2.4.0-2.8.0.1
* Started at 0x91000000.
* Configurations (chip revision: 6):
* Use 8KB DRAM as stack.
* Support XLoad format.
* Enabled BIST mode.
* Enabled memory test mode.
* Use internal memory for stage0/1.
********************************* *****
Boot from flash (0x48000000) mapped to 0x8c000000.
Found XENV block at 0x8c000000.
CPU clock frequency: 300.37MHz.
System clock frequency: 200.25MHz.
DRAM0 dunit_cfg/delay0_ctrl (0xf34111ba/0x000a7787).
DRAM1 dunit_cfg/delay0_ctrl (0xf34111ba/0x000a7777).
Using UART port 0 as console.
Board ID.: "852-E2"
Chip Revision: 0x8634:0x86 .. Matched.
Setting up H/W from XENV block at 0x8c000000.
Setting <SYSCLK avclk_mux> to 0x00000000.
Setting <SYSCLK hostclk_mux> to 0x00000100.
Setting <IRQ rise edge trigger lo> to 0xff28ca00.
Setting <IRQ fall edge trigger lo> to 0x0000c000.
Setting <IRQ rise edge trigger hi> to 0x0000009f.
Setting <IRQ fall edge trigger hi> to 0x00000000.
Setting <IRQ GPIO map> to 0x20090820.
Setting <PB default timing> to 0x10101010.
Setting <PB timing0> to 0x10101010.
Setting <PB Use timing0> to 0x000003f4.
Setting <PB timing1> to 0x00110101.
Setting <PB Use timing1> to 0x000003f3.
Setting <PB timing2> to 0x105f1010.
Setting <PB Use timing2> to 0x000003f8.
PB cs config: 0x000e0040 (use 0x000e0040)
Enabled Devices: 0x00021ace
BM/IDE PCIHost Ethernet I2CM I2CS USB PCIDev2 PCIDev3 SCARD
MAC: 00:02:14:15:51:e0
PCI IRQ routing:
IDSEL 2: INTA(#14) INTB(#14) INTC(#14) INTD(#14)
IDSEL 3: INTA(#15) INTB(#15) INTC(#15) INTD(#15)
Smartcard pin assignments:
OFF pin = 0
5V pin = 1
CMD pin = 2
Setting up Clean Divider 2 to 96000000Hz.
Setting up Clean Divider 4 to 33333333Hz.
Setting up Clean Divider 5 to 25000000Hz.
Setting up Clean Divider 6 to 20000000Hz.
Setting up Clean Divider 7 to 20000000Hz.
GPIO dir/data = 0x76000038/0x76000000
UART0 GPIO mode/dir/data = 0x6e/0x00/0x00
UART1 GPIO mode/dir/data = 0x6e/0x00/0x00
XENV block processing completed.
Found existing memcfg: DRAM0(0x08000000), DRAM1(0x08000000)
Heap/Temp/Temp1/Dest start at 0x14000000/0x16000000/0x15000000/0x12000000.
Default boot index: 0
Scanning ROMFS image at 0x8c040000 (0x48040000) .. Found.
ROMFS found at 0x8c040000, Volume name = YAMON_XRPC
Found 1 file(s) to be processed in ROMFS.
Processing xrpc_xload_yamon_ES4_prod.bin (start: 0x8c040090, size: 0x0002fe84)
Checking zboot file signature .. Not found.
Trying xrpc_xload format .. OK
Checking zboot file signature at 0x13000000 .. OK
Decompressing to 0x91200000 .. OK (453328/0x6ead0).
Load time total 173/255 msec.
Execute final at 0x91200000 ..



********************************* *
* YAMON ROM Monitor
* Revision 02.06-SIGMADESIGNS-01-2.8.0.1
********************************* *
Memory: code: 0x11000000-0x11040000, 0x11200000-0x11204000
reserved data: 0x11240000-0x12440000, PCI memory: 0x12440000-0x12840000
Environment variable 'start' exists. After 1 seconds
it will be interpreted as a YAMON command and executed.
Press Ctrl-C (or do BREAK) to bypass this.

xrpc failed (9)--- if a xtask is using a cipher or if you reboot
--- xrpc will fail with RM_BUSY
Checking zboot signature.. it's not zboot file.
Error : Internal, code = ffffffff
YAMON> xosPe0 serial#b368b1126ee60d044a683e91cb c18f42 subid 0x50
xenv cs2 ok
xosPe0 serial#b368b1126ee60d044a683e91cb c18f42 subid 0x50
xenv cs2 ok
power supply: ok
dram0 ok (8)
dram1 ok (9)
zboot (0) ok
>
********************************* *****
* SMP863x zboot start ...
* Version: 2.4.0-2.8.0.1
* Started at 0x91000000.
* Configurations (chip revision: 6):
* Use 8KB DRAM as stack.
* Support XLoad format.
* Enabled BIST mode.
* Enabled memory test mode.
* Use internal memory for stage0/1.
********************************* *****
Boot from flash (0x48000000) mapped to 0x8c000000.
Found XENV block at 0x8c000000.
CPU clock frequency: 300.37MHz.
System clock frequency: 200.25MHz.
DRAM0 dunit_cfg/delay0_ctrl (0xf34111ba/0x000a7787).
DRAM1 dunit_cfg/delay0_ctrl (0xf34111ba/0x000a7777).
Using UART port 0 as console.
Board ID.: "852-E2"
Chip Revision: 0x8634:0x86 .. Matched.
Setting up H/W from XENV block at 0x8c000000.
Setting <SYSCLK avclk_mux> to 0x00000000.
Setting <SYSCLK hostclk_mux> to 0x00000100.
Setting <IRQ rise edge trigger lo> to 0xff28ca00.
Setting <IRQ fall edge trigger lo> to 0x0000c000.
Setting <IRQ rise edge trigger hi> to 0x0000009f.
Setting <IRQ fall edge trigger hi> to 0x00000000.
Setting <IRQ GPIO map> to 0x20090820.
Setting <PB default timing> to 0x10101010.
Setting <PB timing0> to 0x10101010.
Setting <PB Use timing0> to 0x000003f4.
Setting <PB timing1> to 0x00110101.
Setting <PB Use timing1> to 0x000003f3.
Setting <PB timing2> to 0x105f1010.
Setting <PB Use timing2> to 0x000003f8.
PB cs config: 0x000e0040 (use 0x000e0040)
Enabled Devices: 0x00021ace
BM/IDE PCIHost Ethernet I2CM I2CS USB PCIDev2 PCIDev3 SCARD
MAC: 00:02:14:15:51:e0
PCI IRQ routing:
IDSEL 2: INTA(#14) INTB(#14) INTC(#14) INTD(#14)
IDSEL 3: INTA(#15) INTB(#15) INTC(#15) INTD(#15)
Smartcard pin assignments:
OFF pin = 0
5V pin = 1
CMD pin = 2
Setting up Clean Divider 2 to 96000000Hz.
Setting up Clean Divider 4 to 33333333Hz.
Setting up Clean Divider 5 to 25000000Hz.
Setting up Clean Divider 6 to 20000000Hz.
Setting up Clean Divider 7 to 20000000Hz.
GPIO dir/data = 0x76000038/0x76000000
UART0 GPIO mode/dir/data = 0x6e/0x00/0x00
UART1 GPIO mode/dir/data = 0x6e/0x00/0x00
XENV block processing completed.
Found existing memcfg: DRAM0(0x08000000), DRAM1(0x08000000)
Heap/Temp/Temp1/Dest start at 0x14000000/0x16000000/0x15000000/0x12000000.
Default boot index: 0
Scanning ROMFS image at 0x8c040000 (0x48040000) .. Found.
ROMFS found at 0x8c040000, Volume name = YAMON_XRPC
Found 1 file(s) to be processed in ROMFS.
Processing xrpc_xload_yamon_ES4_prod.bin (start: 0x8c040090, size: 0x0002fe84)
Checking zboot file signature .. Not found.
Trying xrpc_xload format .. OK
Checking zboot file signature at 0x13000000 .. OK
Decompressing to 0x91200000 .. OK (453328/0x6ead0).
Load time total 173/255 msec.
Execute final at 0x91200000 ..



********************************* *
* YAMON ROM Monitor
* Revision 02.06-SIGMADESIGNS-01-2.8.0.1
********************************* *
Memory: code: 0x11000000-0x11040000, 0x11200000-0x11204000
reserved data: 0x11240000-0x12440000, PCI memory: 0x12440000-0x12840000
Environment variable 'start' exists. After 1 seconds
it will be interpreted as a YAMON command and executed.
Press Ctrl-C (or do BREAK) to bypass this.

xrpc failed (9)--- if a xtask is using a cipher or if you reboot
--- xrpc will fail with RM_BUSY
Checking zboot signature.. it's not zboot file.
Error : Internal, code = ffffffff
YAMON>


but ctr-c or break is not working, and i can`t write on YAMON> Any ideas?
rudiniiwwa
14-02-2011, 09:20 PM
i try connect to azbox on ubuntu. I use minicom, but with the same result like putty - no ctrl-c and no way to write enything. Please help :(
Sentosa72
15-02-2011, 12:12 AM
https://www.satpimps.co.uk/showthread.php?t=134446
Sentosa72
15-02-2011, 12:43 AM
i try connect to azbox on ubuntu. I use minicom, but with the same result like putty - no ctrl-c and no way to write enything. Please help :(

Azbox TTL manual (http://www.sat-community.com/azbox-faq/4593-azbox-media-link-ttl-manual-enigma2.html)
rudiniiwwa
15-02-2011, 08:43 AM
https://www.satpimps.co.uk/showthread.php?t=134446
I know the procedure, but why I can`t use my keybord in putty???
mworker
15-02-2011, 09:29 AM
I know the procedure, but why I can`t use my keybord in putty???

Just a hint,
when i was trying to recover my azbox, on my computer i had two windows open.One window was putty and the other one the pdf guide by pr2 for recovering.
It took me a long time to understand why ctr-c was not working for me,but the answer was simple.
Putty window was not active when i was pressing ctrl-c,it was the guide window active.
So make sure putty window is active and also you must press ctrl-c really fast when you see the message on putty.
rudiniiwwa
15-02-2011, 09:40 AM
Just a hint,
when i was trying to recover my azbox, on my computer i had two windows open.One window was putty and the other one the pdf guide by pr2 for recovering.
It took me a long time to understand why ctr-c was not working for me,but the answer was simple.
Putty window was not active when i was pressing ctrl-c,it was the guide window active.
So make sure putty window is active and also you must press ctrl-c really fast when you see the message on putty.

I have only putty open, and still i can`t press Ctrl-C
happyhammer
15-02-2011, 10:01 AM
i have a box where i cant enter CRTL-C to break into YAMOM. I was trying out the serial port connections by trial and error before i found out the proper connections, so i'm assuming i have blown the uart0 port on the chip.(its TX outputs OK, but its RX is not working and so CTRL-C has no effect.

Maybe you connected up VCC to TX or RX pin by mistake?
rudiniiwwa
15-02-2011, 10:40 AM
i have a box where i cant enter CRTL-C to break into YAMOM. I was trying out the serial port connections by trial and error before i found out the proper connections, so i'm assuming i have blown the uart0 port on the chip.(its TX outputs OK, but its RX is not working and so CTRL-C has no effect.

Maybe you connected up VCC to TX or RX pin by mistake?

I connect only tx,rx and gnd from old gsm cable with pl2303 chip. I didn`t connect VCC. Maybe I made mistake in rx. I check this carrefully in home.
Sentosa72
15-02-2011, 11:40 AM
GSM USB cable did not work for me, only serial port, and TTL converters Max232
I tried USB / RS232 cable connected RS232TTL converter, you can not respond to CTRL + c
Sentosa72
15-02-2011, 11:52 AM
Another usb serial converter responded ctrl + c, in this case could not be written in the putty window

If you have a laptop without a serial port, you can try this:
Serial Express card (http://www.manhattan-products.com/en-US/products/6592-serial-expresscard-34)

This works for me
mworker
15-02-2011, 04:20 PM
I recovered my azbox with a CA-42 Nokia clone cable.
Maybe you can use the drivers i attached, which came with my cable.
Good luck.
gepard1
15-02-2011, 11:34 PM
hi i have in my azbox premium rti core 1.1.4 and working but i want put orginal firmware.when im puting my usb fat32 with patch.bin is only showing rescue mode on vfd but not schowing ip.after feau seconds enigma2 starting.where is my mistake?box is conected to the lan with cable.
Hectore
16-02-2011, 09:01 AM
Hello,

Put the original patch.bin on your memory stick.
When you are in rescue mode use JAZUP v1.3, jazup'll copy the official Kernel.
When Jazup reboot your azbox you drop on the official update screen.
Use USB upgrade option.

Regards.
Hectore
larrywilson
17-02-2011, 12:57 AM
Amigos saludos, requiero ayuda intente colocar el fir enigma2 y mi equipo azbox elite no me arranca, la pantalla de tv esta en negro, me aparece 1- power on, 2- usb chek (el pen dri tiene pach.bin enigma 2), 3 booting, 4 rescuer mode, 5 186.89.16.16.160 luego se queda por largo rato mostrado esa secuencia de numeros y nada, destaco que la primera vez que intente cargar la imagen el internet me fallo por no estar conectado el cable y luego de esto es que tiene pantalla negra pero cargo normalmente el firw al 100x100, fue luego de que se apago que no quiso reiniciar normal claro no tenia internet al momento de colocar la imagen, requiero ayuda de como colocar un firw de azbox y salir de este apuro para que el deco funcione agradesco su ayuda para revivir mi azbox elite hd.
gepard1
17-02-2011, 09:01 AM
Thenk You Hector that works.Thanks
Kuhnigotchi
17-02-2011, 02:38 PM
Sorry, wrong language ...
Blagi
18-02-2011, 10:35 AM
Greetings friends, I need help try to put the fir azbox enigma2 and my elite team I started, the tv screen is in black, I get 1 - power on, 2 - usb chek (the pen dri has pach.bin enigma 2), 3 booting, 4 rescuer mode, 5 186.89.16.16.160 then stays for a long time shown that sequence of numbers and nothing underlined that the first time you try to load the image the internet bug me for not being connected the cable and then This screen is black but that is normally charged at 100x100 IRWF was after he refused to turn off that light normal restart did not have internet at the time of placing the image, I need help on how to place a IRWF by Phantom and out of this trouble for the deco work thank you for your help to revive my azbox elite hd.


Net translation...
pateken
21-02-2011, 07:15 PM
There are developments from the last firmware rti4?
Sjaak66
21-02-2011, 10:55 PM
There are developments from the last firmware rti4?

They are developing a different approach the new firm. It looks like it's going slower but they are trying to make it as stable as possible.
Have look at their site. Google RTI forum and You'll find it.
Ventania
13-06-2011, 05:30 AM
Hi!

Please recompile tun.ko
happyhammer
13-06-2011, 08:40 AM
I connect only tx,rx and gnd from old gsm cable with pl2303 chip. I didn`t connect VCC. Maybe I made mistake in rx. I check this carrefully in home.

did you ever resolve this problem?