Enigma 2 by The_ripper - TEST -

[Smudger]

Smudger, I am just after doing a reinstall myself. I add the new image. ftp'ed the new em8634dvb.ko file over and rebooted. Then I change the Turner Conf to 28.2E and ran a manual scan on 28.2E and it started to find channels.
I cancel the scan and ftp'ed over my old lamedb to /etc/enigma2 and rebooted.
All the 28.2E channels were listed in the satellite section and were viewable.
Please try out my lamedb file and tell me how you got on.

45960

I get nothing on the scan screen background goes black the progess goes up but get no services found. yes my dish is connected :)

I added you file via dreamboxedit I get no data on transponder error and a black screen this is on a FTA channel.:smash: if I only ftp it doe'nt work.

I'm missing somthing somehere

I set to single sat and simple settings.

I'm really struggling with this and thats not like me.

I'm a dab hand at swopping software thanks to the tool's available.

If I had a tin of paint I could have finished painting the boat on the beach. :)

[cescof]

[QUOTE=


Certainly yes, but for the problems we already know ... only SD channels !

That's it!

Regards

Arci[/QUOTE]
Sorry fro newbie question. and thanks for answer.. but wich problem?

[kebien]

@all
Just info:
Fixed DVB-S2 tunning for cx24116.

Still working for diseqc problem.

Stay tuned ...

I still on hold waiting for this.
The fact is I want to test some dvb-s2 in 4:2:2 HD channels in order to report to you guys if flags are correct for decoding those.
Thanks

In another note,is it possible to record any of the channels reportedly working?
Or demux for recording is not worked on yet?

[RogerThis]

I get nothing on the scan screen background goes black the progess goes up but get no services found. yes my dish is connected :)

I added you file via dreamboxedit I get no data on transponder error and a black screen this is on a FTA channel.:smash: if I only ftp it doe'nt work.

I'm missing somthing somehere

I set to single sat and simple settings.

I'm really struggling with this and thats not like me.

I'm a dab hand at swopping software thanks to the tool's available.

If I had a tin of paint I could have finished painting the boat on the beach. :)

I had the same problem there with the black screen. I tried to turn off the box with the switch at the back, but that didn't help. But then I restarted using the menu and the channels came back on. See if this helps!

[MickeySa]

Astra 1M (19.2E) - 12382.50 H - Txp: 99 - Beam: Astra 1M DVB-S2 (QPSK) - 27500 9/10

ESPN America HD

DVB-S2 Transporder scanning fixed :)



(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
no version filtering
0000: 00 00 00 00 00 00
mask: ff 00 00 00 00 00
mode: 00 00 00 00 00 00
+ 1/1 TID 00
done!
got pat
got pmt -2
no version filtering
0060: 02 00 75 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
no version filtering
0011: 42 00 0b 00 00 00
mask: fb ff ff 00 00 00
mode: 00 00 00 00 00 00
+ 1/1 TID 02
done!
got pmt 0
no version filtering
0061: 02 00 76 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
+ 1/1 TID 42
done!
got sdt 0
SDT:
ONID: 0085
SID 0075: name 'Sky 3D', provider_name 'SKY'
CA 1833
SID 0076: name '.', provider_name 'SKY'
CA 1833
SID 0077: name 'ESPN America HD', provider_name 'SKY'
CA 1833
SID 0078: name '.', provider_name 'SKY'
CA 1833
got pmt -1
channel done!
FE_GET_FRONTEND failed (Operation not supported)
no channels left to scan.
1 channels scanned, 0 were unavailable.
1 channels in database.
---- saving lame channel db
saved 123 channels and 2517 services!
scan done!

[The_Ripper]

@kebien



In another note,is it possible to record any of the channels reportedly working?
Or demux for recording is not worked on yet?

Sorry not yet, that part of code isnt coded yet, we are doing now fixes regarding tuner for cx24116, and finally for p+ users can try too. So this code will be added l8er.

Regarding first note, we will try tonight to release this fix.

[Smudger]

I had the same problem there with the black screen. I tried to turn off the box with the switch at the back, but that didn't help. But then I restarted using the menu and the channels came back on. See if this helps!

Still can't get this to work.

Bugging me now been trying for 5 hours, yes 5hrs.

somthing is just not connecting for me.

maybe I'm missing some setting have tried a few.

load e2
change to new drive I have tried either changing to new or not still the same outcome.

via setup tuner config set tuner to simle single astra 28.2
send diseqc = no

manual scan scan type = single sat network search = yes

then ok

search performed but no services found.

if I add settings manually is the same except I see no data on transpond message. (timeout reading pat)



ANY Ideas
:(

[RogerThis]

Once these are installed, you just have correct the path for the file CCcam.cfg:

SGC_menu:
From SGC panel installed the CCcam 2.14 and go to the correct path and the environment (-dC /etc/CCcam.cfg) in the startup script CCcam_2.1.4.sh:

/usr/bin/CCcam_2.1.4
/etc/CCcam.cfg
/usr/cams/CCcam_2.1.4.sh



After install "enigma2_plugin_sgc_menu_latest_mi psel.ipk" I can't find the file CCcam_2.1.4.sh.

And there is no "cams" directory in /usr/

How can I find the CCcam_2.1.4.sh file?

[RogerThis]

Still can't get this to work.

Bugging me now been trying for 5 hours, yes 5hrs.

somthing is just not connecting for me.

maybe I'm missing some setting have tried a few.

load e2
change to new drive I have tried either changing to new or not still the same outcome.

via setup tuner config set tuner to simle single astra 28.2
send diseqc = no

manual scan scan type = single sat network search = yes

then ok

search performed but no services found.

if I add settings manually is the same except I see no data on transpond message. (timeout reading pat)



ANY Ideas
:(


Could you try this lamedb instead and reboot? Let me know how you get on.45966

[andriorn]

@The_Ripper
Any clue on why problems on astra 28.2?
Does not matter if i search for channels or load a channel list from Dreambox they work for 10min up to 30min and then stops working picture freezzes and box becomes slow and stops giving picture on FTA channels?

[Smudger]

Could you try this lamedb instead and reboot? Let me know how you get on.45966

I get service unavailable check configuration.

after chack and setting I now get

tune failed


well the box won.

I'm off back to 5020 it was good what I saw. Shame I could'nt work out my problem.

[The_Ripper]

@andriorn
I and MickeySa few times allready told that STC timer(clock) inside Sigma isnt activated for audio/video sync over PCR info for SAT channels, so audio/video start getting lost.

It will be fixed as we progress fruther.
I cant give you people everything at once. Code are huge, plus I am working without Sigma company support so I am stuck with understanding how everything work.

[arcibald]

After install "enigma2_plugin_sgc_menu_latest_mi psel.ipk" I can't find the file CCcam_2.1.4.sh.

And there is no "cams" directory in /usr/

How can I find the CCcam_2.1.4.sh file?

Before ...you must entry in SGC Menu and downloading CCcam 2.14 ... After you will find the paths and applications ...

Only the other plugin glasssysuti ... already have inside them ...

Regards

Arci

[chrissat]

@andriorn

I cant give you people everything at once. Code are huge, plus I am working without Sigma company support so I am stuck with understanding how everything work.

Thanks. :respect-054:

I know you've been working really hard to get things this far and an excellent job you have done. :respect-037:

I know we're all really excited, especially with the amazing progress you have made recently. We just need to have more patience and let you get on with the work you are doing.

You've more than shown you are the right man for the job. It'll be better if we just let you work to your own schedule than ask you to work to ours.

Soon enough we'll all have what we want.:respect-064:

A bit more patience my friends, we're nearly there. :respect-037:

[moicas3004]

it would be good to create a zone in the forum for , setting, satellites, channels, plugins, skins, for this E2 image. The guys are placing everiting here and when we want to find someting we have to go to alot of pages.

[VAJX]

read this...
https://www.satpimps.co.uk/showthread.php?t=139902

[moicas3004]

read this...
https://www.satpimps.co.uk/showthread.php?t=139902
I knwo that but, thats info for e2 image.

I was saying to create a topic zone.

[[0_o]]

Hello comunity!

Well... I have posted this on pr2 thread, but this one have more views and maybe more people could help me here.

I think I need just a little help. I'm trying to find some source code for VFD display from another receivers that use enigma2, but I cant find it correctly I think. For VFD display, I should look inside Plugins in python folder, right?

Thanks

[hfmls]

I knwo that but, thats info for e2 image.

I was saying to create a topic zone.

Yeah i think it's time too :)

[T33]

;760642']Hello comunity!

Well... I have posted this on pr2 thread, but this one have more views and maybe more people could help me here.

I think I need just a little help. I'm trying to find some source code for VFD display from another receivers that use enigma2, but I cant find it correctly I think. For VFD display, I should look inside Plugins in python folder, right?

Thanks

Is is enigma2/lib/python/Components/Lcd.py from http://dream.reichholf.net/pydoc/html/files.html you are looking for?

[MoRpHiUS_x]

Help Please !!!

AZBOX Elite it remains in REBOOTING.

[tul]

Help Please !!!

AZBOX Elite it remains in REBOOTING.

put a formated fat32 pen with patch.bin inside, reboot in the hardware switch, the box will enter recovery mode, give you a ip, after that, run azUP

[MoRpHiUS_x]

put a formated fat32 pen with patch.bin inside, reboot in the hardware switch, the box will enter recovery mode, give you a ip, after that, run azUP

It does not work.

It remains in BOOTING doing ringlet.

[The_Ripper]

@MoRpHiUS_x
What have you done before reboot ?

[MoRpHiUS_x]

Restore to oficial firm 0.9.4890

Show IP 192.168.1.2 i used AzUP and press Update.

Show message After Rebooting, read message on the OSD.

Display VFD showing Rebooting...
------------------------------------

has since been REBOOT

[hfmls]

do u get ftp connetion?

[MoRpHiUS_x]

No, I can not get connection

[nervis]

turn off the box

[The_Ripper]

Flashing old kernel from original FW 2.6.15 failed, so without serial interface you are stuck.

[MoRpHiUS_x]

any solution?

[moding]

i can not get my internal HDD recognized!

i am first trying to initialize my internal Samsung 500GB HDD, but i always get this error message:

Unable to initialize harddisk.
Error: Mount failed

did not change anything in the configuration. this hdd is working just fine with the original firmware for some 2 years now maybe...

what can be the problem here?

is this normal behaviour, or am i the only one with this problem?

someone...?

[cimkaya]

Hello Everyone,

As I am currently having a lack of time to go on with the patching of dvbmediasink...I will have to postpone adding codecs and stuff for a bit.

I am however willing to share the code with someone if he is willing to continue the development.

Let me know if you are interested,

Regards,

Tommy

Hello sattomy,

If you share your code, I can try to free some time ;)

[nervis]

yesterday I have the same problem and I turn off my box and start again and it work perfect.

you have firmware rename to "patch"?

sorry my english

[MoRpHiUS_x]

yesterday I have the same problem and I turn off my box and start again and it work perfect.

you have firmware rename to "patch"?

sorry my english

Not working.

Not pass of BOOTING.

[MickeySa]

Not working.

Not pass of BOOTING.

install tftp32

Download backup_kernel file from the first post of this thread.

and connect on Your box by serial cable.

CTRL+C is to break boot and enter in Yamon

Commands are :

load -b tftp://local ip of pc where tftp is running/backup_kernel 0xb0100000

After load is finished copy paste lenght ( just hexadecimal size it should be 0x680000 )

pflash write -f 0x80000 0xb0100000 0x680000

Wait that he erase and write new kernel in flash.

After that turn off and update receiver with usb with original fw or e2.

[MoRpHiUS_x]

Thanks MickeySa but I have no serial cable.

I see I should get one in order to revive the box.

[digihoe]

@ MoRpHiUS_x

Do you have internal sata connected? If so try to disconnect it and reboot, if that also fail you need serial cable.

[MoRpHiUS_x]

@ MoRpHiUS_x

Do you have internal sata connected? If so try to disconnect it and reboot, if that also fail you need serial cable.

No mi AZBOX is model Elite.

[hfmls]

Hi ... to All

Another effective method to install the best emu and manage them from the OSD panel is provided by these plugins:


Once these are installed, you just have correct the path for the file CCcam.cfg:

SGC_menu:
From SGC panel installed the CCcam 2.14 and go to the correct path and the environment (-dC /etc/CCcam.cfg) in the startup script CCcam_2.1.4.sh:

/usr/bin/CCcam_2.1.4
/etc/CCcam.cfg
/usr/cams/CCcam_2.1.4.sh

Glasssutil:
This will install various emu in the path:

/usr/UCM_CamSrv_bin # including cccam (2.0.11) & cccam214.

The startup scripts will find them in /usr/UCM_CamSrv_script:

Cccam_Cam.sh
Cccam214_Cam.sh

Then enter here the path and the environment (-dC /etc/CCcam.cfg) and you're done.

################################# ################################# #############
Now you can manage your CCcam from panel with their emu_manager and having a complete list of additional features.
################################# ################################# #############

Thanks ... to development teams of these plugins

Regards

Arci
I am trying to use SGC, after i install CCcam from SGC panel here can i edit the settings?
i already have CCcam.cfg in /etc too.
What should i do now?
sorry

ok, i found it, i edited:

/usr/bin/$CAM &

to

/usr/bin/$CAM -dC /etc/CCcam.cfg &

[tx0]

guys what is the latest image for e2 and where I can dl it? Everything changed here I'm lost and confused.

[hfmls]

https://www.satpimps.co.uk/showthread.php?t=139902
after update send
em8634dvb.ko
to /lib/modules/2.6.22.19-19-the_ripper/extra

[arcibald]

I am trying to use SGC, after i install CCcam from SGC panel here can i edit the settings?
i already have CCcam.cfg in /etc too.
What should i do now?
sorry

ok, i found it, i edited:

/usr/bin/$CAM &

to

/usr/bin/$CAM -dC /etc/CCcam.cfg &

or ... set & add new variable string ENV="-dC /etc/CCcam.cfg" ;)


#!/bin/sh
CAM="CCcam_2.1.4"
ENV="-dC /etc/CCcam.cfg"

... & add new variable string ...

cam_up () {
/usr/bin/$CAM $ENV &


Regards

Arci

[intranet]

1 question:
how the hell did You send settings to the receiver?? I tried everything (dreamset, dreamboxedit) but nothing to do!!
"strange" thing is that if i access using webinterface i can see the settings channel list, but using remote control "blue button" through the receiver i got blank!! please help me, cos i'm going crazy!! :)

[feedme]

1 question:
how the hell did You send settings to the receiver?? I tried everything (dreamset, dreamboxedit) but nothing to do!!
"strange" thing is that if i access using webinterface i can see the settings channel list, but using remote control "blue button" through the receiver i got blank!! please help me, cos i'm going crazy!! :)

Change paths.
/etc/enigma2 for channels and bouquets.

works with DreamBoxEdit4.
Settings maker1.3 can also be used, but I have not fully tested.

I think we need a MAP for file paths to help everybody, becaue the file locations differ from Dream.

I use WinScp and the search function (find files ALT F7) is very usefull.....

[hfmls]

go to system,customize, expert and activate option to see bouquets

[arcibald]

1 question:
how the hell did You send settings to the receiver?? I tried everything (dreamset, dreamboxedit) but nothing to do!!
"strange" thing is that if i access using webinterface i can see the settings channel list, but using remote control "blue button" through the receiver i got blank!! please help me, cos i'm going crazy!! :)

Blue Button> Red button (all channels)
Blue Button> Green button (all channels divided by satellites)
Blue Button> Yellow button (all channels divided by provider)
Blue Button> Button Blue (channels on the favorite list, if present)

To view the channels in the favorite list, you must go to Menu> Setup> System> Customize ... and set YES "Enable multiple bouquets" ;)

[hfmls]

http://www.youtube.com/watch?v=50TbT3BoLhY :)
guys watch this please:
https://www.satpimps.co.uk/showthread.php?t=141485
Project valerie running

[intranet]

go to system,customize, expert and activate option to see bouquets

i missed that!! Thank you very much, my "bad". ;) :)

[arcibald]

Change paths.
/etc/enigma2 for channels and bouquets.

works with DreamBoxEdit4.
Settings maker1.3 can also be used, but I have not fully tested.

I think we need a MAP for file paths to help everybody, becaue the file locations differ from Dream.

I use WinScp and the search function (find files ALT F7) is very usefull.....

example path on DreamBoxEdit > set to >Enigma2 settings

Options> Profiles:

Services and Bouquets files = /etc/enigma2/

User Bouquets files = /etc/enigma2/

Satellites.xml file = /etc/tuxbox/


Regards

Arci

[romeox]

I installed the new version e2 test. and wanted to return to Official Firmware and instead put 0.9.5020 0.9.4466 and I think I put blade crashed I can not connect anything to the box either with USB azup not take any write Booting and so remain
help

[kebien]

or ... set & add new variable string ENV="-dC /etc/CCcam.cfg" ;)


#!/bin/sh
CAM="CCcam_2.1.4"
ENV="-dC /etc/CCcam.cfg"

... & add new variable string ...

cam_up () {
/usr/bin/$CAM $ENV &


Regards

Arci

Why you use a command to force CCcam to read CCcam.cfg from /etc when CCCam read CCcam.cfg from /etc by default?
This is probably the third time I post on the subject and I keep reading this,am I missing something?

You using this

/usr/bin/$CAM -dC /etc/CCcam.cfg &

can be replaced by this:

CCcam &

will execute CCcam reading CCcam.cfg from /etc ,no need to set more options or paths.

[hfmls]

ok, THANK YOU but it's also the third time i say cccam in my box always looks for CCcam.cfg in /var/etc, not /etc

[MoRpHiUS_x]

I installed the new version e2 test. and wanted to return to Official Firmware and instead put 0.9.5020 0.9.4466 and I think I put blade crashed I can not connect anything to the box either with USB azup not take any write Booting and so remain
help

Have the same problem as me

[nervis]

hfmls /var/etc is in enigma 1,on enigma2 is etc.this is automatically redirected

[hfmls]

when i run ./CCcam.mipsel , cccam runs but without any connections because in log it says "couldn't find /var/etc/CCcam.cfg"
now i'm confused..

[nervis]

where you have CCcam.cfg?

[hfmls]

/etc
but that's ok, i use that script now, it works perfect.

[MoRpHiUS_x]

A question for The_Ripper or MickeySa.

I can use the recovery method that descrive Recovery.rar file the first post?.

[kebien]

Ok,I understand now why you guys do this.
E2 normally have a simlink /var/etc /etc,but apparently,this image of E2 doesn;t come with that.
The best thing you guys can do is make those simlinks

have to make simlinks in root for
/hdd /media/hdd
/mnt /media
/share /usr/share

in /var simlinks to
etc /etc
keys /usr/keys
scce /usr/scce
tmp /tmp
tuxbox /etc/tuxbox

I assume some of this links are already made,but apparently some are missing.
You make the ones you need and is easy for beginners.
DCC can make the links for you by right clicking in the folder you want to make the simlink.

[nervis]

it simlinks are will erased when you reboot I think

[arcibald]

Ok,I understand now why you guys do this.
E2 normally have a simlink /var/etc /etc,but apparently,this image of E2 doesn;t come with that.
The best thing you guys can do is make those simlinks

have to make simlinks in root for
/hdd /media/hdd
/mnt /media
/share /usr/share

in /var simlinks to
etc /etc
keys /usr/keys
scce /usr/scce
tmp /tmp
tuxbox /etc/tuxbox

I assume some of this links are already made,but apparently some are missing.
You make the ones you need and is easy for beginners.
DCC can make the links for you by right clicking in the folder you want to make the simlink.


it simlinks are will erased when you reboot I think


Did you miss this reading ... ;)


Guys, open /etc/fstab and remove

tmpfs /var tmpfs defaults 0 0
tmpfs /tmp tmpfs defaults 0 0

this two lines , if you dont want to lost any data from this folders, or just /var line
and tmp to be lost after reboot ...

Regards

Arci

[Andiii]

...
I cant give you people everything at once. Code are huge, plus I am working without Sigma company support so I am stuck with understanding how everything work.
I have a AZBox Premium DVB-C and i would like to have E2 on it.

So if there is:
- a do***entation of Premium Tuners (C & S)
- a do***antation/information of the sigma processor and the interface between Tuner and processor
- the source of DVB-S2 tuner driver available
- no one who is already working on DVB-C tuner drivers

i would spend some time to get it working.

I can't contact you because of forum limitations.

[hfmls]

The_Ripper and team won't release drivers. He already said he would work on that, after dvb-s2 (more users, priority)

[digihoe]

I have a AZBox Premium DVB-C and i would like to have E2 on it.

So if there is:
- a do***entation of Premium Tuners (C & S)
- a do***antation/information of the sigma processor and the interface between Tuner and processor
- the source of DVB-S2 tuner driver available
- no one who is already working on DVB-C tuner drivers

i would spend some time to get it working.

I can't contact you because of forum limitations.

Most of what you are asking for has been posted in several posts.

https://www.satpimps.co.uk/showthread.php?t=129644 is a good starting point I guess.

Best regards!

[pazzoider]

Hello friends,
i've installed last E2 release, i updated the driver for scrambled channels(and set to 755) and then
i've installed vhannibal mono channel list e2 via enigmedit mode 2.4.
I can see channel list, i can zap on it but...

for every channel:

"NO DATA ON TRANSPONDER"

My tuner configuration:
single,single,hotbird 13.0,send disecq->NO
My dish is a motor dish and it's positioned on HOTBIRD


How can i solve my problem?
I'm working on this problem for latest 3 days :(

PS: I have a tv CRT 16:9 and i've set azbox --->SCART/RGB

[hfmls]

i think The_Ripper is fixing that problem.

[MoRpHiUS_x]

Screenshot failure.

http://img146.imageshack.us/img146/6716/azboxhd.th.jpg (http://img146.imageshack.us/i/azboxhd.jpg/)

This issue is resolved as stated MickeySa, or otherwise?.

Is failure of botloader in flash?.

Thanks!

PD: I tried doing what it says the file on recovery.rar, but still staying in booting

[MickeySa]

You have to use serial connection.

[MoRpHiUS_x]

You have to use serial connection.

Yes, tomorrow I will put the serial cable.

But my question is that if you think that using the backup_kernel as I said earlier, this problem is solved.

I just do not like having to send the SAT.

Thanks!

[Matrix10]

Long time ago I promised skin for AzBox

BlackShadow2 Ver 1 spec AzBox
Very fast skin.
This skin is copyright © protected and can not be used without my permission
So AzBox have my permission to use.

MX

http://i147.photobucket.com/albums/r315/Matrix11_2006/shot5-6.jpg

[nstergi]

has anybody tested LAN or usb speed????

what is the throughput?

[Juka]

Long time ago I promised skin for AzBox

BlackShadow2 Ver 1 spec AzBox
Very fast skin.
This skin is copyright © protected and can not be used without my permission
So AzBox have my permission to use.

MX

http://i147.photobucket.com/albums/r315/Matrix11_2006/shot5-6.jpg

Thanks Matrix10! This skin is really amazing!!! :respect-048:

Regards
Juka

[Abdul1508]

I think missing a few posts after the update forum.
I think to have read that a new reales would be tonight, with the disq fix, a fix dvb-s2. correct diet?
:confused:

[moicas3004]

Long time ago I promised skin for AzBox

BlackShadow2 Ver 1 spec AzBox
Very fast skin.
This skin is copyright © protected and can not be used without my permission
So AzBox have my permission to use.

MX

http://i147.photobucket.com/albums/r315/Matrix11_2006/shot5-6.jpg


Here is the files to download?

[kasukabe]

Yes, I've read that a new version will be released tonight, supporting DVB-S2 and DiSEqC Protocols (1.0 , 1.1 , 1.2)
Now, these postings are gone.

[MoRpHiUS_x]

The cable for NOKIA CA-42 can serve for use in the AZBOX as serial cable?.

You can not find the converter MAX232 RS232 to TTL in Spain.

Thanks!

[cicciotommaso]

[QUOTE = MoRpHiUS_x; 760.896] il cavo per Nokia CA-42 può servire per l'uso nel AZBOX come cavo seriale?.

Non è possibile trovare il convertitore MAX232 RS232 a TTL in Spagna.

Grazie! [/ QUOTE]

NOKIA USB CA-42 data cables

[Smudger]

Here is the files to download?


I think it's for build into rippers release as default.

[moicas3004]

I think it's for build into rippers release as default.

Ok, thanks.

[Matrix10]

I think it's for build into rippers release as default.

I do not know
Skin is in the hands of AzBox team.
I wanted just to tell that this is original version
with my permission.

This is first test version ...
Works very nicely and fast.

[MickeySa]

Thanks,

Matrix10 :)

[pazzoider]

I'm enthusiastic in seeing the big work is doing Ripper team & friends :)
Our azboxes are becoming excellent decoders :) :respect-051:
I can't wait for disecq fix for my motorized dish :)

[MickeySa]

Dear friends,

In next hour, new version will be public.

Please stay tuned.

[[0_o]]

I do not know
Skin is in the hands of AzBox team.
I wanted just to tell that this is original version
with my permission.

This is first test version ...
Works very nicely and fast.

Thanks @Matrix10!
Your skins are, as always, awesome! :respect-048:

Thanks for your help with all of us, azbox's enthusiasts! :)


Also, once again, thanks for the team, with another update soon! :respect-058::respect-058:

[[0_o]]

Is is enigma2/lib/python/Components/Lcd.py from http://dream.reichholf.net/pydoc/html/files.html you are looking for?

Hello,
Thanks for the reply.
I only can see the header files from it (I think), so I'm not sure about this... but looks like what I was looking :confused:

[Claudecir]

Dear friends,

In next hour, new version will be public.

Please stay tuned.

Azbox firmware nevermore... :respect-023: :respect-040:

Last day in my life using a Azbox Firmware... :eek:

[voki081]

Can we open I2 chanels(b_ls@t, C+NL) with enigma 2 EMU`s?

[MickeySa]

ATTENTION !!!

To INSTALL new Image of Enigma 2 for AzBOX HD ELITE/PREMIUM

YOU HAVE TO USE NEW AZUP APPLICATION WHICH IS ATTACHED TO ARCHIVE WITH NEW IMAGE !!!

AzUP v1.1 by telesat

Install it on Your PC before proceeding install of new version Enigma 2 on Your receivers !!!

[andressis2k]

AZUp installed. Waiting for Enigma biting my nails!

[Claudecir]

Sorry people, in Brazil, site of satpimps is blocked. Please add files on 4shared or others?

Thanks...

[aristoteles78]

Hi guys, could you please tell me if this new E2 image will control a motorized dish in USALS mode too?
Thank you so much to all the Team for the great work!
Cheers.

[pr2]

Hello,

Your skin is really nice and works fine on the AZbox HD, the bug that I have with 16:9 image on SCART is solved with your skin.
Moreover it is really readable on a CRT TV, very good job!

Pr2

[kooleracer]

Hello,

Your skin is really nice and works fine on the AZbox HD, the bug that I have with 16:9 image on SCART is solved with your skin.
Moreover it is really readable on a CRT TV, very good job!

Pr2

where can you download that skin?

[MickeySa]

Dear friends,

Enigma v1.0.26 by the_ripper and team

What is new :

DiseQc FIX ( 1.0 , 1.1 , 1.2 manual and USALS )

DVB-S2 FIX

Added /boot partition so no more errors durring installation of IPKG

Integrated BlackShadow2 Skin from Matrix10 ( thanks to Matrix10 ).

BEFORE FLASHING PLEASE READ THIS POST :

https://www.satpimps.co.uk/showpost.php?p=760926&postcount=1588


Download:


www.azbox-enigma.eu/upload/E2_AZBox_1.0.26.rar

Many thanks to the_ripper and all team.

[Abdul1508]

Dear friends,

Enigma v1.0.26 by the_ripper and team

What is new :

DiseQc FIX ( 1.0 , 1.1 , 1.2 manual and USALS )

DVB-S2 FIX

Integrated BlackShadow2 Skin from Matrix10 ( thanks to Matrix10 ).

BEFORE FLASHING PLEASE READ THIS POST :

https://www.satpimps.co.uk/showpost.php?p=760926&postcount=1588



www.azbox-enigma.eu/upload/E2_AZBox_1.0.26.rar

Many thanks to the_ripper and all team.



Are all files in process, or do we do it themselves so as, ful 1080p HD, wifi, media section? Thanks.:respect-062:

[Claudecir]

Please add AZUp 1.1.zip on 4shared or others?

Thanks...

[MickeySa]

BOOTING PROBLEM FIX !!!

After making flash, please imidiatelly go in RESCUE MODE ( Reboot box with USB Memory stick with patch.bin file inserted in RECEIVER ).

Telnet and FTP username and password are :

username: root

password: azbox

After RESCUE MODE show You IP of Your receiver , use putty and telnet to it and type this commands :

mkdir /D

mount /dev/hda1 /D

Connect with FTP to Your Reciever, and go :

/D/etc/init.d and place this bootup file which is there.

Overwrite : YES

Eject USB, Turn off and Turn on Your receiver and all will be ok.

[daleelis]

Please add AZUp 1.1.zip on 4shared or others?

Thanks...

--> http://www.megaupload.com/?d=5VJ72QT4

[kooleracer]

People, wait few minutes, fix is ready !!!

The fix for e2 to boot?

[tul]

what fix!? im already uploading to az

i see, 25% then pufff black and nothing right?

what to do now? restore with oficial or w8 for the fix?

[mkosta]

BOOTING PROBLEM FIX !!!

After making flash, please imidiatelly go in RESCUE MODE ( Reboot box with USB Memory stick with patch.bin file inserted in RECEIVER ).

After RESCUE MODE show You IP of Your receiver , use putty and telnet to it and type this commands :

mkdir /D

mount /dev/hda1 /D

Connect with FTP to Your Reciever, and go :

/D/etc/init.d and place this bootup file which is there.

Overwrite : YES

Eject USB, Turn off and Turn on Your receiver and all will be ok.

Where is the "bootup" file ??? :)

[kooleracer]

look page 80

[MickeySa]

@tul

https://www.satpimps.co.uk/showpost.php?p=760937&postcount=1597

[Claudecir]

Please bootup file on 4shared or other...

thanks...

[chrissat]

Please bootup file on 4shared or other...

thanks...

http://www.4shared.com/account/file/wmKJicbC/bootup.html

[Claudecir]

Is up... Thanks... Beautifully skin...

[tul]

so far, no sound in dvb-s2 channels, and 3 quick zaps made it crash.
imagem are laggy, but this is major walktrought

[pr2]

Hello,

So to be clear, if when you boot your Azbox with E2 1.0.26 you have a black screen and the vfd display turn black after having displayed 24 or 25 for a long time, you need to apply the new bootup to fix this problem.

Don't worry your Azbox is still accessible via telnet and FTP so you can replace the file and reboot it, problem will be fixed.

Regards,

Pr2

[pazzoider]

what fix!? im already uploading to az

i see, 25% then pufff black and nothing right?

what to do now? restore with oficial or w8 for the fix?
I have your same problem :(
At 25% VDF is black and azbox stops there :(
What is the solution?

[tul]

I have your same problem :(
At 25% VDF is black and azbox stops there :(
What is the solution?

check previously post from mickey

[MickeySa]

I have your same problem :(
At 25% VDF is black and azbox stops there :(
What is the solution?

Solution :

https://www.satpimps.co.uk/showpost.php?p=760937&postcount=1597

[Claudecir]

Dont open channel FTA on azbox premium hd? In my not open FTA and not open files .ts...

[simon30000]

bootup fix worked for me .
this skin is dam ***y
thankyou to all ,
superb work guys
il report back as i test

[kanber_kav]

diseqc not worked :(

[Abdul1508]

I just scan with disq A: Hotbird, B: Astra 1, D: Astra3 C: Astra2
but I see no channels. what am I doing wrong?

[kooleracer]

diseqc is not function here to.

[T0rca1950]

With diseqc enabled i can open hotbird but not astra 19.2, same as before...

[MickeySa]

For those with DiseQc not working, download and unpack all files :

Go back to previous version of Enigma 2 1.0.25 and do this :

Go in rescue mode :

mkdir /D

mount /dev/hda1 /D

FTP to Receiver :

File cx24116.ko copy to :

/D/lib/modules/2.6.22.19-19-the_ripper/extra/

When asked to Overwrite, say Yes :)

File Tunerinfo.py copy to :

/D/usr/lib/enigma2/python/Components

File enigma2 copy to :

/D/usr/bin

When asked to Overwrite, say Yes :)


Remove USB Stick, and turn off and turn on receiver so all will work.

[kooleracer]

Does cccam function in this fw? i cant get it to work can somebody confirm this?

[T0rca1950]

I don't know anything about coding, so i hope i don't ask a complicated thing to do, but, could you pack all that fixes in a new patch.bin file? :D

[MickeySa]

Ok people, stop downloading and installing if you have problem.

We will repack new ver tomorrow/today.

[kanber_kav]

dmesg messge

cx24116_readreg: reg=0x9d (error=-22)
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
cx24116_readreg: reg=0x9d (error=-22)
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
cx24116_readreg: reg=0x9d (error=-22)
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
cx24116_readreg: reg=0x9d (error=-22)
i2c-adapter i2c-0: Unable to perform I2C read - RM_TIMEOUT
cx24116_readreg: reg=0x9d (error=-22)
root@AZBox:~#

[kooleracer]

@mickeysa does cccam works with this fw?



i got same message as kav get with diseqc fix.


back 2 fw 5020 for formula 1 today. (mickeysa could you please enable cccam in the repack )

[tul]

@mickeysa does cccam works with this fw?



i got same message as kav get with diseqc fix.


back 2 fw 5020 for formula 1 today. (mickeysa could you please enable cccam in the repack )

you have to send the file *.ko that was provided days ago to enable the use of CCcam

[MickeySa]

I cant do anything with that kooleracer.

You can ask the_ripper in morning.

[MickeySa]

Kanber_Kav,

Please update to 1.025, and then, put enigma2, .ko and .py file.

Try that.

[MickeySa]

For those where still DiseQc not working do like this:

Downgrade to Enigma 2 1.0.25 and put this files :

https://www.satpimps.co.uk/showthread.php?t=135894&page=81

[kanber_kav]

Disecq Worked
Thanks The_Ripper and Developer team :D

[kooleracer]

Disecq Worked
Thanks The_Ripper and Developer team :D

also dvb-s2?

[Abdul1508]

For those with DiseQc not working, download and unpack all files :

Go back to previous version of Enigma 2 1.0.25 and do this :

Go in rescue mode :

mkdir /D

mount /dev/hda1 /D

FTP to Receiver :

File cx24116.ko copy to :

/D/lib/modules/2.6.22.19-19-the_ripper/extra/

When asked to Overwrite, say Yes :)

File Tunerinfo.py copy to :

/D/usr/lib/enigma2/python/Components

File enigma2 copy to :

/D/usr/bin

When asked to Overwrite, say Yes :)


Remove USB Stick, and turn off and turn on receiver so all will work.



I've been trying everything but not working for me :confused:

[kooleracer]

tomorrow there will be a repack so just wait for that to come.

[azbox4ever]

I've been trying everything but not working for me :confused:

If you use DCC to FTP ,it's not great idea ,it doesn't work very well.

For exemple ,when you try ton copy several files ,it don't work.

When you want to ftp file with DCC ,you must tranfert them one by one

transfer the first file then close DCC ,then open DCC then transfer the second file

[crazy2]

sound problem

[Abdul1508]

If you use DCC to FTP ,it's not great idea ,it dosent work very well.

For exemple ,when you try ton copy sveral file ,it don't work.

When you want to ftp file with DCC ,you must tranfert them one by one

I tranfert the firt file then i clove DCC ,then i open DCC then i transfet the second file ..............


and it worked?

[kanber_kav]

ca devices not work.
dvb-s2 signal ok
diseqc ok

[Abdul1508]

ca devices not work.
dvb-s2 signal ok
diseqc ok


What version enigma do you used

[crazy2]

enigma2 1.0.25
dvb-s2 ok
ca devices ok
USALS ok
audio and volume problem

[kooleracer]

enigma2 1.0.25
dvb-s2 ok
ca devices ok
USALS ok
audio and volume problem

do you got ca working with old em8634.ko?

Could you decribe how you installed it?

so first 1.00.25
then replace 8634.ko.
and then what?

[crazy2]

em8634dvb.ko

lib/modules/2.6.22.19-19-the_ripper/extra

File em8634dvb.ko copy to

https://www.satpimps.co.uk/showthread.php?t=139902

[kooleracer]

em8634dvb.ko

lib/modules/2.6.22.19-19-the_ripper/extra

File em8634dvb.ko copy to

https://www.satpimps.co.uk/showthread.php?t=139902


how do you got dvb-s2 and diseqc fix, working in 1.00.25

[crazy2]

Originally Posted by MickeySa View Post
For those with DiseQc not working, download and unpack all files :


For those with DiseQc not working, download and unpack all files :

Go back to previous version of Enigma 2 1.0.25 and do this :

Go in rescue mode :

mkdir /D

mount /dev/hda1 /D

FTP to Receiver :

File cx24116.ko copy to :

/D/lib/modules/2.6.22.19-19-the_ripper/extra/

When asked to Overwrite, say Yes

File Tunerinfo.py copy to :

/D/usr/lib/enigma2/python/Components

File enigma2 copy to :

/D/usr/bin

When asked to Overwrite, say Yes


Remove USB Stick, and turn off and turn on receiver so all will work.

https://www.satpimps.co.uk/showthread.php?t=135894&page=81

[azbox4ever]

I'm testing the new release.

DiseqC work on Astra/Hotbird ,i got all channel by scannig those 2 sat

Sky 3D HD on Astra 19.2°E is working
Das Erste HD is working (Astra 19.2°E)
ZDF HD is workin (Astra 19.2°E)
Einfestival HD is working (Astra 19.2°E)
Cccam is working in all encrypted channel HD and SD ,on both satélite Astra -hotbird
I have no sound on many channel (some time got it by playing with "RESOLUTION" button remote control)

[azbox4ever]

and it worked?

YEst it's working ,i use DCC 2.95 ,on i transfer file one by one

Open DCC tranfet the first file ,close DCC ,open DCC transfert the second file ,close DCC ,open DCC trnasfer the tird file.
Reboot Azbox

[RogerThis]

Thanks for all the hard work last night. The project is really coming along. Nice to see you have a website up and running azbox-enigma.eu :respect-040:

Will the new website be the main place for downloads from now on?
All that's missing is the howto section. If you need a hand with that I'm a native English speaker.

Also big thanks to satpimps for the dedicated section! :respect-055:

Have you decided on the official name for the image and team?
The Ripper? E2 Azbox? azbox-enigma?

[bobster]

Is disecq motor working with usals now?

[pegaman]

i am watching F1 with no problems at all using 1.0.25 and mgcamd...
Excellent job...

[albaki77]

Seem to be getting this error at about 30% of updating.Tried uninstall of azup and delete telsat folder then re install :07:

[albaki77]

Seem to be getting this error at about 30% of updating.Tried uninstall of azup and delete telsat folder then re install :07:

just tried a new USB stick and problem solved :respect-010:

[dejan30yu]

pise mi geeko : p sta sada da radim

[DimitarCC]

Screenshot failure.

http://img146.imageshack.us/img146/6716/azboxhd.th.jpg (http://img146.imageshack.us/i/azboxhd.jpg/)

This issue is resolved as stated MickeySa, or otherwise?.

Is failure of botloader in flash?.

Thanks!

PD: I tried doing what it says the file on recovery.rar, but still staying in booting

hi! I have the same problem! Furst E2 was boot OK! After that i was service scan and after that i was decide to restart the receiver! After that that screen showed up! How can i fix that? I dont have serial cable but i have telnet and FTP access to the box! Please someone help me! Thanks!

[fcis7000e+]

i am watching F1 with no problems at all using 1.0.25 and mgcamd...
Excellent job...

Hi,

Are you using mgcamd as EMU (i.e. using softcam and not CS)?
Is there a way to download the latest softcam directly from the box (like we used with TechSat plug-in with original firmware)

Thanks.

PS: Congratulations to The Ripper and rest of the team for the excelent work being done.

[pegaman]

Hi,

Are you using mgcamd as EMU (i.e. using softcam and not CS)?
Is there a way to download the latest softcam directly from the box (like we used with TechSat plug-in with original firmware)

Thanks.

PS: Congratulations to The Ripper and rest of the team for the excelent work being done.

Hi i am using mgcamd as CS. There is a post for this and how to enable autostart.

[stra]

@DimitarCC
@MoRpHiUS_x

Hi
You have to check if there is working Yamon. You can do this with serial cable. If Yamon is working - there is relative easy solution of the problem.
if Yamon is broken (zboot (1) failed) - There are two possible options:
- Removing NOR flash and programing content with external flash programmer, and re-soldering it again on the PCB.
- using JTAG for flashing broken NOR flash
check this:
1. http://www.pristavka.de/index.php?topic=6691.0
2. http://www.pristavka.de/index.php/topic,5763.0.html

Regards!

[DimitarCC]

@DimitarCC
@MoRpHiUS_x

Hi
You have to check if there is working Yamon. You can do this with serial cable. If Yamon is working - there is relative easy solution of the problem.
if Yamon is broken (zboot (1) failed) - There are two possible options:
- Removing NOR flash and programing content with external flash programmer, and re-soldering it again on the PCB.
- using JTAG for flashing broken NOR flash
check this:
1. http://www.pristavka.de/index.php?topic=6691.0
2. http://www.pristavka.de/index.php/topic,5763.0.html

Regards!

actually after using repair package i was able to get to usb upgrade menu. from that point can i fix my box? But remote is not reacting

[hfmls]

guys, just woke up, how is the situation?
latest E2_AZBox_1.0.26 works ok cccam in scrambled channels
dvb-s2 too?
thank you.

[pazzoider]

Seem to be getting this error at about 30% of updating.Tried uninstall of azup and delete telsat folder then re install :07:

I've go same error and my solution was:

ATTENTION:
Please check if in usb there are at least 60-70 MB of free space after AZUP upgrade.
This space is needed to create CRAMFS in usb.
Otherwise you get that error

[drazen1983]

i have trouble setting up cccam. Can anyone help me?

[kooleracer]

guys, just woke up, how is the situation?
latest E2_AZBox_1.0.26 works ok cccam in scrambled channels
dvb-s2 too?
thank you.


1.00.26 need fix to work proper but dvb-s2 with cccam working in 1.00.25 with old 8634.ko and diseqc is working too.

[kooleracer]

how does the channel list works cant seem to sort it out good i cant find my bouqets?

[drazen1983]

you have to enable multiple bouqets

[simon30000]

scaned in 28e dvbs2 nicely. latest version is nice. i going to wait for the repack later today/tonight
emus not working with this version
is there a file that i can add , rather than rollin back to previous version ? for emus

[kooleracer]

scaned in 28e dvbs2 nicely. latest version is nice. i going to wait for the repack later today/tonight
emus not working with this version
is there a file that i can add , rather than rollin back to previous version ? for emus
'

go to page 68 or 69 and download the 8634.ko replace it and install emu's. im using 1.00.25 btw and cccam 2.1.4 is working

[moicas3004]

here with .25 firmware and the files works great, scaning, emu, hd chanels on 30W, all fine.

Just the sound lost if i go directly from list to chanel. If a zap the sound is good.

[happyhammer]

@DimitarCC
@MoRpHiUS_x

Hi
You have to check if there is working Yamon. You can do this with serial cable. If Yamon is working - there is relative easy solution of the problem.
if Yamon is broken (zboot (1) failed) - There are two possible options:
- Removing NOR flash and programing content with external flash programmer, and re-soldering it again on the PCB.
- using JTAG for flashing broken NOR flash
check this:
1. http://www.pristavka.de/index.php?topic=6691.0
2. http://www.pristavka.de/index.php/topic,5763.0.html

Regards!

no-one on this site seems to have used the JTAG sucessfully yet.
I am awaiting delivery of a "universal JTAG adapter" to see if i can progress.


https://www.satpimps.co.uk/showthread.php?t=140894

[kooleracer]

how can cccam autostart, the init.d script is not working for me?

[eppie]

how can cccam autostart, the init.d script is not working for me?

in this file : /etc/init.d/bootup
make this change in this line :
echo 66 > /proc/progress
/usr/bin/CCcam

[simon30000]

cccam working great sd/hd on new version 1.26
using previous em8634dvb driver

[kooleracer]

finaly no multicas hickups anymore, cccam is really big improvement. happy e2 1.00.25 user. Only prob is de sound an rc control setup.

[Abdul1508]

I do not get the service to scan everyone seems to work except me.
I've tried almost everything as well as enigma 2_1.26 and 1.25.
except only the enigma 2_1.21 does the scan with me.I do not know why,:confused:
is there a difference between the azbox premium and elite.

[MickeySa]

@Abdul

It is obviously not working for You as You didnt read my post. Go to 1.0.25 version, change enigma2, cx.ko file and tunerinfo.py ......

[kooleracer]

how can i make a file that excute this command when azbox is booting up:

cd /usr/bin

./CCcam.mipsel -dC /etc/CCcam.cfg

[Abdul1508]

@Abdul

It is obviously not working for You as You didnt read my post. Go to 1.0.25 version, change enigma2, cx.ko file and tunerinfo.py ......


I got what you've already posted all the files replaced with DCC 2.95, but it was constitutional.
strange is that the scan with enigma2_1.21 prefct works.

[SPF]

Hi

I tried to install E2_AZBox_1.0.26 last night on my AZbox Premium but I cannot get it to load properly or reload the previous firmware 0.9.5020

I first installed AZUP 1.1 on my PC.
Then I inserted a USB flash drive with the new patch.bin on it and booted.
The patch ran up to 100% and I rebooted. I removed the USB flash drive.

When rebooting, the front display reads “Booting” then “USB Check!” then “Rescue Mode”.
When “Rescue Mode” appears I choose “OK” on the handset. Then the box’s IP Address is displayed.

The IP Address is displayed when I boot with and without the USB flash drive inserted and with and without having pressed “OK” either on the handset or the OK button on the front of the box.

When I enter the IP Address in AZUp and press “Update” it tries to connect and login but shows that it is Not Responding. After around 25 seconds a message saying “Other error – Unable to Complete Request“ with an “OK” box appears. When I click on “OK” nothing happens but AZUp.exe is still working in the background using 50% of CPU resources according to Windows Task Manager.

When I close AzUp I get the message “Project1 is not responding”.

I have uninstalled and reinstalled AZUp 1.1 but this has made no difference.

I have looked for a solution but cannot find one. Can anyone help me either load 1.0.26 or revert to 0.9.5020?

Thanks

[leao6]

Hi

I tried to install E2_AZBox_1.0.26 last night on my AZbox Premium but I cannot get it to load properly or reload the previous firmware 0.9.5020

I first installed AZUP 1.1 on my PC.
Then I inserted a USB flash drive with the new patch.bin on it and booted.
The patch ran up to 100% and I rebooted. I removed the USB flash drive.

When rebooting, the front display reads “Booting” then “USB Check!” then “Rescue Mode”.
When “Rescue Mode” appears I choose “OK” on the handset. Then the box’s IP Address is displayed.

The IP Address is displayed when I boot with and without the USB flash drive inserted and with and without having pressed “OK” either on the handset or the OK button on the front of the box.

When I enter the IP Address in AZUp and press “Update” it tries to connect and login but shows that it is Not Responding. After around 25 seconds a message saying “Other error – Unable to Complete Request“ with an “OK” box appears. When I click on “OK” nothing happens but AZUp.exe is still working in the background using 50% of CPU resources according to Windows Task Manager.

When I close AzUp I get the message “Project1 is not responding”.

I have uninstalled and reinstalled AZUp 1.1 but this has made no difference.

I have looked for a solution but cannot find one. Can anyone help me either load 1.0.26 or revert to 0.9.5020?

Thanks
please!!! please. read a litle more.

[gorgeit]

will this version work on a prem plus box .
thanks

[Abdul1508]

will this version work on a prem plus box .
thanks


no,you have to wait.

[fanoSat]

Hi, when Premium DTT will be supported?

It is a very important feature for me... if it is supported I let Opensat buggy firmware alone FOREVER :rofl:

[gorgeit]

thanks
i admit im inpatient to try it.

[gorgeit]

or even impatient

[T33]

or even impatient
I would say stupid and lazy since it mentioned a million times before in this thread.

[gorgeit]

hey pillock dont be an arse.
a genuine question been away not had chance to read through all the threads yet.

[MrKappa]

I'm waiting too the possibility to install E2 on Premium Plus!
To whom it may interested I just advice to check the web site where E2 will be ready for our decoder:
http://www.azbox-enigma.eu/?cat=5

[gorgeit]

thanks just found it .

[qwess]

i tested mgcamd 1.35a, cccam 2.1.4, and oscam 0.9.3090.
all works very well, but the best is oscam !!

[lou_teena]

Hi, when Premium DTT will be supported?

It is a very important feature for me...

...very important for me too, i have a dtt pay tv card (m7).. any news about it?

[DimitarCC]

no-one on this site seems to have used the JTAG sucessfully yet.
I am awaiting delivery of a "universal JTAG adapter" to see if i can progress.


https://www.satpimps.co.uk/showthread.php?t=140894

How can i connect the serial cable? Is there thread saying it?
If Yamon is running how can i fix my box? Thanks!

[numark0504]

the new firmware works good now, service scan is ok on 19,2 and 23,5. hd is okay.....

!!first i tried it with a combination of dvb-s AND dvb-t tuner and nothing works...no picture and no service scan was possible....!!! now, i have disconnected the dvb-t tuner and everything is good....

:woohoo-022::woohoo-022::woohoo-022:

[kooleracer]

my cccam is only working if i open a session via my computer if i close the window cccam stop on the azbox ?

[simon30000]

my cccam is only working if i open a session via my computer if i close the window cccam stop on the azbox ?

add & at end of line in telnet, then close dcc down, u should be able to continue viewing

[hfmls]

ok, with a huge hangover i tried to test what i can :P

DVB-S2 HD - Awsome image, no sound.
DVB-S2 SD - Same thing.
No EPG :(

Sometimes channels don't have sound (The_Ripper already told us about the timer needed for this)

Scan works perfect in Hispasat 30w, i found 507 services. (pretty good)

[leao6]

...very important for me too, i have a dtt pay tv card (m7).. any news about it?


how you gonna get here? you hurry? go walking :angelsad2::angelsad2:

[jimmyjim11]

Kernel upload files and picture e2jtag

http://www.mediafire.com/?eh4swibdb2wzqcl

DimitarCC try this

have not got it going my self tough :confused:

[hfmls]

Guys shut up with dvb-t and dvb-c requests already!!
Can't u see The_Ripper is finishing DVB-S2 driver still??? And trying to make it perfectly stable.

He already said thousands of times dvb-c and dvb-t will come.
If u can't wait, go back to original firmware!

[MickeySa]

@all

New Version of E2 v1.0.27 is ready for download

- PLEASE READ README.TXT FILE BEFORE FLASHING -

Info:


http://www.azbox-enigma.eu/?p=63

Download:


http://www.azbox-enigma.eu/upload/E2_AZBox_1.0.27.rar

[T33]

.

[hfmls]

@all

New Version of E2 v1.0.27 is ready for download

Info:


http://www.azbox-enigma.eu/?p=63

Download:


http://www.azbox-enigma.eu/upload/E2_AZBox_1.0.27.rar

Thank you very much mickeySA :)
Do we already have sound in dvb-s2 and epg?

Gonna test, thank you.

[kasukabe]

Using 1.0.26 with applied drivers. I can move my dish using DiSEqC 1.2!! Great!
DVB-S2 Scan ok.
CCcam ok. (also Sky HD)
Sound problems.
Is there difference between 1.0.26 with applied drivers ( cx24116.ko , enigma2 , TunerInfo.py , em8634dvb.ko) and 1.0.27 ?

[stevie1961]

the new firmware works good now, service scan is ok on 19,2 and 23,5. hd is okay.....

!!first i tried it with a combination of dvb-s AND dvb-t tuner and nothing works...no picture and no service scan was possible....!!! now, i have disconnected the dvb-t tuner and everything is good....

:woohoo-022::woohoo-022::woohoo-022:
Same goes if you have a dvb-c tuner installed as well.

Great work guy's, yo've saved my box from a horrible death

[kooleracer]

does 1.0.27 include CA 8634.ko?

[intranet]

1.0.27 version is very very good (about tuner) all channels work.. i just got problem with audio (with no audio on some channels, especially the sd one).. amazing channel zapping in hd (s*ly it)

[dempsey]

Problem on 23.5 ° E with TP 12109 H 27500 DVB/S2 8PSK 3 / 4 pilot ON
Skylink HD

[hfmls]

intranet do u have audio in dvb-s2 ? hd and sd ?

sometimes audio doesn't work but if u go back and forward again channel will have sound.

what i wanted to know is if dvb-s2 channels already have audio :)
because dvb-s2 sound didn't work at all in previous,

thank you

[@telesat]

pls read readme.txt included in E2_AZBox_1.0.27.rar archive
_________________________________ __________________

How to use AZUp
Because they appeared quasi instructions for AZUp use and procedures for the insertion of E2 in AZBox
I prepared a short and precise instructions - exactly what you need to do
btw , I must to mention , ignore wrong "tutorials" with wrong directions
as : you must use Format App :)))) realy funny because AZUp manage partitions of your AZBox ;)
Ignore quasi instructions and use this official instruction from the author of AZUp


We have 3 situation :
I) You have Official FW in your AZBox andyou want to install E2
II) You have E2 in yourAZBox and now you want to install official FW
III) You have E2 in your AZBox and now you want to install new/update of E2


I) You have Official FW in your AZBox andyou want to install E2
Switch off AZBox
Put usb stick with patch.bin (e2)
switch on AZBox
Follow messages on GUI for update official FW (standard procedure)
After about 1 min , your receiver will reboot
Dont remove USB Stick from AZBox !!!
wait for IP adress on VFD of AZBox
Start latest ver of AZUp
Write IP adress in AZUp (see VFD)
Click on button Update
AZUp check for resque mode, also check ver of patch.bin (E2 or official fw)
AZUp create cramfs, Create 3 partition on DOM and formatted them
Copyng E2 kernel in Flash (about 2.5 min)
Copyng E2 files in first DOM partition (about 1 min)
when get popup msg - remove usb stick and wait for reboot (Rebooting... msg on VFD)
New E2 is installed successfully


II) You have E2 in yourAZBox and now you want to install official FW

Switch off AZBox
Put usb stick with patch.bin (Official FW)
switch on AZBox
wait for IP adress on VFD of AZBox
Start latest ver of AZUp
Write IP adress in AZUp (see VFD)
Click on button Update
AZUp check for resque mode, also check ver of patch.bin (E2 or official fw)
AZUp Create 4 partition on DOM and formatted them
Copyng Official (old) kernel in Flash (about 2.5 min)
when get popup msg - first part of update is done, but dont remove USB stick from AZBOX
wait for reboot , and follow messages on GUI for update official FW (standard procedure)



III) You have E2 in your AZBox and now you want to install new/update of E2

Switch off AZBox
Put usb stick with patch.bin (e2)
switch on AZBox
wait for IP adress on VFD of AZBox
Start latest ver of AZUp
Write IP adress in AZUp (see VFD)
Click on button Update
AZUp check for resque mode, also check ver of patch.bin (E2 or official fw)
AZUp create cramfs, Create 3 partition on DOM and formatted them
Copyng E2 kernel in Flash (about 2.5 min)
Copyng E2 files in first DOM partition (about 1 min)
when get popup msg - remove usb stick and wait for reboot (Rebooting... msg on VFD)
New E2 is installed successfully


rgs,
telesat

[MickeySa]

@all

SVN will be also soon online, we hope until end of this month.

So everybody can start making AzBox Enigma 2 Images.

[door]

@all

SVN will be also soon online, we hope until end of this month.

So everybody can start making AzBox Enigma 2 Images.

SVN?? care to elaborate.

[[0_o]]

@all

SVN will be also soon online, we hope until end of this month.

So everybody can start making AzBox Enigma 2 Images.


This could be a stupid question... so you mean that many teams (who are already working for DMM, Vu+, etc..) can start working on AzBox?

I'm very thankful about your great effort around Azbox! :congratulations-008

[stra]

no-one on this site seems to have used the JTAG sucessfully yet.
I am awaiting delivery of a "universal JTAG adapter" to see if i can progress.


https://www.satpimps.co.uk/showthread.php?t=140894

Actually the only working solution is based on Wrigler JTAG adapter which is the cheapest one on the market ... and also it is very simple for DIY.

If you read carefully posts at pristavka.de - there is good explanation how to create / Wrigler adapter, and how to perform NOR flashing.

Regards!

[MickeySa]

;761216']This could be a stupid question... so you mean that many teams (who are already working for DMM, Vu+, etc..) can start working on AzBox?

I'm very thankful about your great effort around Azbox! :congratulations-008

Correct ! . But not only teams, every person which is interested to adopt enigma 2 and so on.

[[0_o]]

Correct ! . But not only teams, every person which is interested to adopt enigma 2 and so on.

Yea, right. Who have some knowledge to do that too :)

But... just one more annoying question... your team will not continue the project? Because without you we never could see the light across this trip...!

Thanks :bravo-009:

[intranet]

intranet do u have audio in dvb-s2 ? hd and sd ?

sometimes audio doesn't work but if u go back and forward again channel will have sound.

what i wanted to know is if dvb-s2 channels already have audio :)
because dvb-s2 sound didn't work at all in previous,

thank you

yes it works!! and very very very good, better than dvb-s ;) :)

[MickeySa]

;761219']Yea, right. Who have some knowledge to do that too :)

But... just one more annoying question... your team will not continue the project? Because without you we never could see the light across this trip...!

Thanks :bravo-009:

First of all to avoid any confusion !!!

We never said that we will not continue ?!

So be careful when making statement.

Of course, our team will continue to support enigma 2 hd on AzBox, and we will continue publishing clean cvs enigma 2 for azbox hd devices.

In some release we will just include aditional skin, and clean E2 Image.

We are making SVN, so other people/teams can also make some images...

[Smudger]

Quick question.

when installing does any have success with just installing E2 setting up tuner then just scanning sat without sending already created settings files?

[moicas3004]

On first reboot it worked fine but after i restared the box, no longuer i can use the tunner. No signal in PAT!?

Any solution for this?

I isered a list, chanels open fine with cccam, but after that no longuer the tuner recives signal.

version 27.

[pr2]

Quick question.

when installing does any have success with just installing E2 setting up tuner then just scanning sat without sending already created settings files?

Hello,

Yes I just install 1.0.27 and scan Astra 19.2E without any problem but don't use the Default services lists, the list that is downloaded I think is not up-to-date and then when scanning with this list you miss lot of channels.

But be carefull Premium Plus and Ultra are not yet supported, only Premium and Elite.

Otherwhise you can use SettingsMaker 1.3 to generate a channel list and send it with DreamboxEdit.

Pr2

[joe 1234567]

yes me to no signal my dish has moved . but i can not move it back .if i trie box crash's

[paulemh]

Hello,

I Have a AZbox Elite and i am Install Enigma2 1.0.27 on a HHD not in my DOM, but this Enigma2 only make 3 partition on my HDD what can i do for have the outher partition from my hdd.
I am make the other partition manual with Paragon Partition Manager and format in ext3.

Thanks

and a big thanks for building this enigma2 :respect-046:

[[0_o]]

First of all to avoid any confusion !!!

We never said that we will not continue ?!

So be careful when making statement.

Of course, our team will continue to support enigma 2 hd on AzBox, and we will continue publishing clean cvs enigma 2 for azbox hd devices.

In some release we will just include aditional skin, and clean E2 Image.

We are making SVN, so other people/teams can also make some images...

Right @MickeySa. Sorry about that.
My concern was about team left the project after making the SVN, only that. :)

[brx]

Hello,can someone explain how to make dish moving,what i have to do in settings,i installed last version .27,thx in advance:respect-069:

[andressis2k]

Hi. I've got Fixed Astra 19,2 dish
1.0.25 - Ok
1.0.26 - No signal
1.0.27 - No signal

When scan, I get no channels. Signal is 99%, and BER -22% always

What can I do?

Regards

[feedme]

Installed 1.0.27

Scanned 19.2 , good result .
DVB-S2 visible from 19.2 , nice skin.
No sound at all.

After reboot no picture from 19.2 at all (snr showed 99% ..??)

Diseq-C 1.2 was ok with my superjack with 1.0.25 + new drivers, now no movement.

Scanning now 28.2 so far no channels found.

Stopped scanning.

Tested 19.2 again, nothing .
Changed tuner config to A,B,C,D, no effect

Rebooted, AND 19.2 sound both on S2 and SD ch's .
Sound lost again when channel surfing ,not coming back when going up/down channels.
Reboot , getting black screen with SNR 99% (again)
Reboot, sound and picture.

I have also T-tuner installed , maybe there is a side effect from that?


I think to get 100% good drivers is just round the corner, all features are done , but not in one version .


:bowing-036: to team !:respect-023:

[andressis2k]

How can i connect the serial cable? Is there thread saying it?
If Yamon is running how can i fix my box? Thanks!

Try this https://www.satpimps.co.uk/showthread.php?t=141544

[door]

can someone post cccam emu any version for this fw and how to make it work?

Thanks.

[moicas3004]

Installed 1.0.27

Scanned 19.2 , good result .
DVB-S2 visible from 19.2 , nice skin.
No sound at all.

After reboot no picture from 19.2 at all (snr showed 99% ..??)

Diseq-C 1.2 was ok with my superjack with 1.0.25 + new drivers, now no movement.

Scanning now 28.2 so far no channels found.

Stopped scanning.

Tested 19.2 again, nothing .
Changed tuner config to A,B,C,D, no effect

Rebooted, AND 19.2 sound both on S2 and SD ch's .
Sound lost again when channel surfing ,not coming back when going up/down channels.
Reboot , getting black screen with SNR 99% (again)
Reboot, sound and picture.

I have also T-tuner installed , maybe there is a side effect from that?


I think to get 100% good drivers is just round the corner, all features are done , but not in one version .


:bowing-036: to team !:respect-023:

Me too.

After the first reboot no more tunner working.:117:

I also have a second tunner, DVB-C, can be for this?

[Abdul1508]

Hi. I've got Fixed Astra 19,2 dish
1.0.25 - Ok
1.0.26 - No signal
1.0.27 - No signal

When scan, I get no channels. Signal is 99%, and BER -22% always

What can I do?

Regards


I have the same here with my azbox premium:angelsad2:

1.21 scan - ok
1.25 Scanning - no signal
1.26 Scanning - no signal
1.27 Scanning - no signal

[simon30000]

1.27 28e scan ok 1085 chans sd/hd ok runnin cccam213
same here with audio loss
thankyou to all involved in this project
u succeded and won ,congrats on makin e2 work on az
:respect-054::respect-054::number-one-043:

[door]

1.27 28e scan ok 1085 chans sd/hd ok runnin cccam213
same here with audio loss
thankyou to all involved in this project
u succeded and won ,congrats on makin e2 work on az
:respect-054::respect-054::number-one-043:

Can you post files for cccam to work and instructions?

thanks.

[feedme]

Installed 1.0.27

Scanned 19.2 , good result .
DVB-S2 visible from 19.2 , nice skin.
No sound at all.

After reboot no picture from 19.2 at all (snr showed 99% ..??)

Diseq-C 1.2 was ok with my superjack with 1.0.25 + new drivers, now no movement.

Scanning now 28.2 so far no channels found.

Stopped scanning.

Tested 19.2 again, nothing .
Changed tuner config to A,B,C,D, no effect

Rebooted, AND 19.2 sound both on S2 and SD ch's .
Sound lost again when channel surfing ,not coming back when going up/down channels.
Reboot , getting black screen with SNR 99% (again)
Reboot, sound and picture.

I have also T-tuner installed , maybe there is a side effect from that?


I think to get 100% good drivers is just round the corner, all features are done , but not in one version .


:bowing-036: to team !:respect-023:

28.2 channels found , diseq with A,B,C,D config stared to work.

sound comes and goes as it wishes.

[andressis2k]

On first reboot it worked fine but after i restared the box, no longuer i can use the tunner. No signal in PAT!?

Any solution for this?

I isered a list, chanels open fine with cccam, but after that no longuer the tuner recives signal.

version 27.


Hi. I've got Fixed Astra 19,2 dish
1.0.25 - Ok
1.0.26 - No signal
1.0.27 - No signal

When scan, I get no channels. Signal is 99%, and BER -22% always

What can I do?

Regards


Installed 1.0.27

Scanned 19.2 , good result .
DVB-S2 visible from 19.2 , nice skin.
No sound at all.

After reboot no picture from 19.2 at all (snr showed 99% ..??)

Diseq-C 1.2 was ok with my superjack with 1.0.25 + new drivers, now no movement.

Scanning now 28.2 so far no channels found.

Stopped scanning.

Tested 19.2 again, nothing .
Changed tuner config to A,B,C,D, no effect

Rebooted, AND 19.2 sound both on S2 and SD ch's .
Sound lost again when channel surfing ,not coming back when going up/down channels.
Reboot , getting black screen with SNR 99% (again)
Reboot, sound and picture.

I have also T-tuner installed , maybe there is a side effect from that?


I think to get 100% good drivers is just round the corner, all features are done , but not in one version .


:bowing-036: to team !:respect-023:




Me too.

After the first reboot no more tunner working.:117:

I also have a second tunner, DVB-C, can be for this?


I have the same here with my azbox premium:angelsad2:

1.21 scan - ok
1.25 Scanning - no signal
1.26 Scanning - no signal
1.27 Scanning - no signal

Removed the second tuner (DVB-T), re-installed 1.0.27, and all worked great!
On combo boxes, we must do it. Why? I don'k know, but it works :D

[onkelm]

Hi,

e2 works fine here on azbox-elite.
Sometimes no sound, switching channel helps.
On HD no sound.

1. question
I like to mount a path to my networkdrive.
On my VU+ it is done in auto.network.
But here does not work, any idea ?

2.question
it is not possible to record on usb hardrive so far, or am I wrong ?

however, more than I expected so far - keep going for this perfect work.
:respect-023: :respect-059: :respect-023:

onkelm

[paulemh]

Hello,

I Have a AZbox Elite and i am Install Enigma2 1.0.27 on a HHD not in my DOM, but this Enigma2 only make 3 partition on my HDD what can i do for have the outher partition from my hdd.
I am make the other partition manual with Paragon Partition Manager and format in ext3.

Thanks

and a big thanks for building this enigma2 :respect-046:

Now i have mount manual my outher partition with:
mkdir -p /mnt/hda4
mount /dev/hda4 /mnt/hda4

What i am must set in "/etc/fstab" for mount my new partition autmatic then my box start.

[jolatacqce]

trying to installe e2 1.0.27,followed @telesat,instructions,but using,azup,get msg .can't connect to host.I used ip adr.which was on vfd.any help would be appreaciated. Q1. Should the ip addr.of receiver be same as it was prior E2.install? The ip adr. showing on vfd is that of my pc.Could this be the reason why Icannot connect? HELP!

[moicas3004]

Removed the second tuner (DVB-T), re-installed 1.0.27, and all worked great!
On combo boxes, we must do it. Why? I don'k know, but it works :D

Anyone else can confirm that removing the second tuner the signal is no longuer lost?

[paulemh]

Now i have mount manual my outher partition with:
mkdir -p /mnt/hda4
mount /dev/hda4 /mnt/hda4

What i am must set in "/etc/fstab" for mount my new partition autmatic then my box start.

ok final.
I have automount my outher partition with this line in /etc/fstab.

/dev/hda4 /mnt/hda4 ext3 defaults

[RogerThis]

The_Ripper and MickeySa and the guys:

Please stop posting in this thread. It gone on for long enough.
We have a new section that should be properly utilised.

MOD's Please Lock This Thread!!!

[leoleo]

Anyone else can confirm that removing the second tuner the signal is no longuer lost?

Yes, confirm !!

[Abdul1508]

Removed the second tuner (DVB-T), re-installed 1.0.27, and all worked great!
On combo boxes, we must do it. Why? I don'k know, but it works :D


I do not use two tuners. I've only DVB-S2 tuner.
I think the bropleem the drivers fault, the signal is not received correctly.
The ripper can maybe make him or the team, I hope ... :respect-017:

[MickeySa]

The_Ripper and MickeySa and the guys:

Please stop posting in this thread. It gone on for long enough.
We have a new section that should be properly utilised.

MOD's Please Lock This Thread!!!


Which section and thread ?

You see it is moved in right one AzBox E2 Newbie ?!

[MickeySa]

If somebody want to make screenshots using Webinterface , use this grab file maded by DDamir.

Place grab file in /usr/bin

Dont forgett chmod 755.

[joe 1234567]

Ok i will take out my dvb-t and see if that help's

[halabessa]

@ MickeySa & the Ripper & team

Would you please explain to us why once 1.027 E2 installed & after several reboot..... almost all of us have the sound gone? is it still a problem in tuner driver you are fixing or is there any other technical reason?

Thank you for your usual support:respect-053:

[MickeySa]

We tryed to explain i think more than 50 times !!!

This will be last time to explain to every lazy user which dont want to use Search option or to search just one single thread.

WE TURNED OFF STC TIMERS, SO THERE IS NO SOUND ON SOME CHANNELS OR THERE IS PROBLEM WITH SOUND !!!

THOSE THINGS WILL BE FIXED IN NEXT RELEASE

[MickeySa]

Neutrino keymap for AzBox HD

https://www.satpimps.co.uk/showthread.php?t=141557

[moicas3004]

@MickeySa , do you think, that a second tunner on the box can cause instabilaty in the DVB-S tunner?

I have the signal lost after the first reboot. Guys are saying that they removed the second tunner and that signal lost is resolved.

If you can confirm this, please post officialy in the home page website so all people can act on this subject.

[BE-COOL]

I also have DVB-T, and after reboot I have no signal, and now I also have a pink background instead of black, crazy azbox lolol.

[The_Ripper]

@halabessa
I explain why, read again old posts and other topics.

[The_Ripper]

Regarding DVB-T tuners I will check it

[moicas3004]

Regarding DVB-T tuners I will check it

I have the second tunner DVB-C and also after first reboot no signal in DVB-S tunner.

But, this firmware is becoming very good. Thanks to the Developers.

[hfmls]

@all

SVN will be also soon online, we hope until end of this month.

So everybody can start making AzBox Enigma 2 Images.

:respect-023::respect-023::respect-023::respect-023:

[crazy2]

enigma2 keymap.xml

Ok button :infobar
Up and Down :Channel
ch+ and ch-:Channel
Left and right :Open service
Exit :exit
İnfo: EPG

http://www.mediafire.com/?gg824y240aczagh

[crazy2]

serviceeditor
channel hide
/tmp
telnet "ipkg install /tmp/*.ipk" enter

http://www.mediafire.com/?31bbjjqjghyrt6l