3 satelittes

[ronnieb]

Hi,
I have set up my dreambox 500, is there a way you can set it up for 3 satelittes, I have a sky dish pointing 28.2 and a 80cm dish with twin lnb at 13and 19east My problem is when I connect this dish I want it to know that it has to switch, I can set this at the beginning of the settings but I need 28.2 as well it seems you can have 1 or 2 or all but not 3 satellites hope you follow this.
Thanks in advance ronnieb

[Giga]

You need a diseqc switch, each single LNB connected to a different diseqc switch port. Take note what lnb for what sat location is on what port and what diseqc commands your switch is for. If this is a 4 port switch this is either (1.0/1.1/2.0/2.1). Set your sat receiver accordingly for each satellite: diseqc version and port used.
ps: if you use one single LNB and a dual headed LNB (internal diseqc switch in these lnb's) you most likely to have issues with commands not passing down the chain (switch 1 > switch 2 on duo lnb)