tm6900 hd - no ch's on 10E

[joany]

Some weeks ago I deleted every channel off this sat because my channel list was full.
Now I can't get the sat listed on my list of sats.
I've tried a scan from sat setup, a scan from motorised settings and an advance search but no luck.
I realise its something really obvious, but just now I can't put my finger on it.

any advice would be graciously received.

[Giga]

pid search and add transponders, other wise in 90 minutes after F1 have a look and upload latest 10°E from yesterday

[Giga]

download your channel list and use Clarke Tech Studio, 2 instances open one with your channel list and second with 10°E list and copy paste to your list and save.

[joany]

Hey gig I did this and 10E is now appearing on my sat list. However I'm still not getting any signal strength on any tp. Can somebody please provide a channel (with tp and rate) of a channel that is definately live.

thanks in advance.

[FENEKI]

Eutelsat W2A @ 10° East

10East 11278 V 2893 3/4 DVB-S/MPEG-2 > WDS SD

10East 12611 H 9260 5/6 DVB-S/MPEG-2 > MGM MC

10East 11144 H 2441 2/3 DVB-S/MPEG-2 > ANB

10East 12733 H 6111 3/4 > SLO-004

10East 11166 H 3616 2/3 DVB-S2/8PSK NBC Russia >NBC Universal

ok m8

[Giga]

Hey gig I did this and 10E is now appearing on my sat list. However I'm still not getting any signal strength on any tp. Can somebody please provide a channel (with tp and rate) of a channel that is definately live.

thanks in advance.
diseqc setting for that satellite on 10°E?

[joany]

diseqc setting for that satellite on 10°E?

I don't understand what you mean by this?

I have tried the settings provided by feneki (thanks m8) but I still have no signal strength just for this sat. Wonder if I deleted soething other than the channels.

[joany]

diseqc setting for that satellite on 10°E?

hey gig
when I cut and paste your channel settings for 10E and put them into my channel list will this db have your location set for the usals setting?? maybe I need to chnge this just for this sat?

[Giga]

diseqc to select either LNB (multi feed + switch) or select motor diseqc 1.2 and move dish to that location. (satellite setup)

[Giga]

not using usals here, diseqc 1.1 and 1.2 motor, so check the settings for that satellite and verify for your setup.

[joany]

Sorted thanks.

just moved sat with blue button and saved it.

cant get the mgm channels tho, must have gone now. are you seeing same?

[Giga]

receive these on 12611 H SR 9260 strength: 84% Quality: 68%

[joany]

receive these on 12611 H SR 9260 strength: 84% Quality: 68%

I can get them but they are scrambled for me. are you opening them?

[Giga]

no, only running TM softcam

[dxman]

I can get them but they are scrambled for me. are you opening them?

you can not receive those MGM channels they are biss scrambled
if you know the biss key then you can see them otherwise forget it

[joany]

you can not receive those MGM channels they are biss scrambled
if you know the biss key then you can see them otherwise forget it

they were in the last empb key bin for d2.

i realise these keys dont normally last long. was just seeing if evryone else was seeing same.

[FENEKI]

if you using TM6900HDsuper CCcam receive MGM + MGM HD running CS Works on others Satellite m8

[dxman]

MGM 10east
2 MGM encrypted in Biss 1 Irdeto
biss channels only working with known biss key's otherwise forget it as i mention before,just tested myself not working