cccam configuring

[joany]

I have a test line and have a connection but don't seem to be unscrambling anything.
Is anybody online who could advise?

questions I have:
1. not sure how to set up (caids,ident) filter
2. I have 10 c lines. Will every package be on every server or will the different lines refer to different packages ( i have only setup 2 lines at this stage)
3.on caids filter the format id XXXX XXXXXX but the caids ident lists I found on google ALL have the format XXXX XXXX do you simply put 00 at the front of the second set of numbers.

Please reply asap cos I only have about an hour and the test server is only for today.

thanks in advance.

pd stb is tm6900hd super using cccam

[Giga]

cas caids is for fine tuning, that is for later once you have C S running
most important is you get passed the router

[Giga]

found the most important one for not having connections was:
ip range used on your home network (https://www.satpimps.co.uk/showthread.php?t=134066) <= click here

[Giga]

c line (https://www.satpimps.co.uk/showpost.php?p=683005&postcount=7) <= click here

[joany]

c line (https://www.satpimps.co.uk/showpost.php?p=683005&postcount=7) <= click here

the 8281 menu is telling me I M CONNECTED TO THE SERVER.

sorry cap lock

so if I'm connected I just need to select the correct channels?

[Giga]

router need to know (https://www.satpimps.co.uk/showpost.php?p=714820&postcount=13) <= click here
port forwarding is in theory not needed as TM6000 HD Super are client only. Do check router log for blocked traffic from and to TM6000 HD Super

[joany]

router need to know (https://www.satpimps.co.uk/showpost.php?p=714820&postcount=13) <= click here
port forwarding is in theory not needed as TM6000 HD Super are client only. Do check router log for blocked traffic from and to TM6000 HD Super

I am connected to the server but dont know how to get channels unscrambled. Dont know if I am using the caids filter correctly.

port forwarding is working and I am connected.( I have 5 c lines connected)

Please lets use a real example. How to set up caids filter for digifilm 1 on 1W

[Giga]

Caid:1880 PrID:00000000

[joany]

will it work if I leave filter set to auto?

[Giga]

yes: you don't need filter to try out, clear filters

[Giga]

Once you are connected, you're on the right track. Have to go and then F1, will be other opportunities to pursue this. Always keep in mind the channel is maybe not in the package or the server is a fake.