Green tint on picture

[invalid]

Right just got spiderbox 9000 today,got it all running but i`ve got a green tint on picture.Used hdmi that came with it also tried 2 others i had but still the same.Got a freesat box with hdmi & thats ok so any ideas please.

H.

[mister-t]

try swapping the hdmi leads,try spider on the freesat hdmi

[invalid]

Done all that m8,it`s got me licked

H

[mister-t]

have you tried the rf out,also check all is correct in control panel
but try rf out if all is fine then maybe hdmi on reciever could be faulty
mister-t

[invalid]

Just tried with RCA plugs & picture is ok so only thing i can think of is there`s a fault with the hdmi connection.


H.

[invalid]

you beat me 2 it mister-t,thanks any way for reply`s

H.

[echelon]

try component out at 720P as well , just to be sure

[invalid]

i`d got a xbox control lead trapped under spiderbox so pulled box out 2 free lead & when i put it back well fcuk me no green screen with hdmi.I know hdmi was in correct so there must be something wrong with hdmi socket but it`s working now,will let lee know monday & see what he say`s.


H.

Ps will give that a try in morning ech,

[echelon]

maybe it was interference from the xbox control lead being under the motherboard base causing the tint , anything is possible and interference from adjacent cables is well known

so hopefully thats all it was and you can rest easy

[simon 2003]

I don't know the answer to that one but i have a question which is,
my loop through dose'nt give me a picture on the second receiver which
is a Protek9600ip. I have tested the patch lead and its ok with no breaks.:cuss:

should get a prize for most blatant highjack ever:respect-applause-00

[invalid]

Well i think i`ve sorted all my problems i was having.Remote started working yesterday but i then got the green tint back on picture through hdmi,so i thought the box must be a dud or the firmware i loaded went bad some how.
So a couple of hour ago i got a rs232 cable out d/l software from here nipped the old bum cheeks together & went 4 it,took about 15min to finish,then followed echelon`s simple to follow tut,loaded firmware etc back on & all has been ok for the last hour.

H.