newcs

[maciek]

I try to run newcs daemon as a card server on ICECRYPT 4000 FW IRD. I use newcs.st40 binary and i try to run it "by hand". So I got on console:

Could not open device /dev/sci0 [Might be in use by another process?]
The slot is reseting and system try to initialise once again

I put my card to lower slot. Upper slot is disabled in config file.

fuser /dev/sdi0 shows nothing. What the problem is? Can anybody help me?

[crabber]

An st 40 processor is used in a kathrein and an IP box, I know absolutely nothing about an Icecrypt but wonder if you are using the correct binary file for newcs?

[maciek]

ICERYPT use ST chipset too (like Kathrein). So binary woks but the problem is that unknown proces use sci interface. So maybe You know something about proper binary?

[crabber]

No I am sorry, I didn't realise your receiver had an ST chipset!
Newcs runs fine on a Kathrein and IP but I mostly used it with E2, not the original software.

[maciek]

Maybe I am wrong, but see:

# cat /proc/cpuinfo
machine : STb7100 Reference board
processor : 0
cpu family : sh4
cpu type : STb710x
cpu flags : fpu
cache type : split (harvard)
icache size : 16KiB (2-way)
dcache size : 32KiB (2-way)
bogomips : 263.16
pll0_clk : 531.00MHz
pll1_clk : 399.60MHz
sh4_clk : 265.50MHz
sh4_ic_clk : 132.75MHz
module_clk : 66.37MHz
slim_clk : 265.50MHz
comms_clk : 99.90MHz
tmu0_clk : 16.59MHz