Steps to follow when loading a new patch

[BRUTUS]

Since the early July patch, Factory reset can be done now without worries of losing the gift. However you need to save your channels list first before loading the new patch and then do the factory reset.
Here is the sequence:
1. Go to menu, then Accessory using left or right arrow
2. then choose USB, press ok, press the gren button follow by save Channel Data and your channels list is save on your usb.
3. Load the new patch
4. Do a factory reset
5. Go back to menu and press 1111 and turn all network ON
6. Load your channels list back
7. Go to installation to check that your usals details are still there, otherwise put them back
8. Go to key menu and press reset keys
9. Load the latest softcam key
10. turn both ucas ON

You're done.

[keith mawer]

your a genius brutus , i have to admit i dont think i could cope!

[tinto de verano]

Hi,
Do we really need to do a Factory Reset after adding a new patch?
I have just loaded today's Austria Sat Fix patch on my HD9000 Combo.
I have NOTdone the Factory Reset, but evreything seems to be working, except for Private Spice on Austria (Dorcel and Hustler and Alpengluhen or something are now working).
Another minor issue is No Signal on some channels 16E (Tring, Digitalb...) but I am guessing is a problem with the signal (it happens from time o time, apparently), and not due to the fact that I did not do a factory reset.
I have not done the Factory Resret as I am afraid of losing the gift.
Thanks.
tinto de verano

[toothfairy]

See the first post M8.

[tinto de verano]

Hi manic011,

I did install the DarkmanPatch- Spider_HD9000_1210_F431 patch, my first one, when I received my HD 900 Combo, and then did a Factory Reset.

Last night I installed the new Darkman patch Spiderbox_HD_9000_0113_K patch.

Everything seemed to work fine without doing a Factory Reset.

That is why I was asking: Do I stilll need to do a Factory Reste after installing the Darkman patch Spiderbox_HD_9000_0113_K patch?

Thanks.

tinto de verano

[Satcat]

Even if it doesn't say so on the patch, I still do a factory reset after loading a new one. It's no problem and doesn't take a lot of time, just follow Brutus's instruction above and you can't go wrong.

[tinto de verano]

OK.
Thanks manic01, Satcat and brutus.
I will do a factory resret then, as per instructions.
Thanks a lot.
tinto de verano

[tinto de verano]

Factory Reset now done.
Nothing lost as you said.
Thanks.
I still seem to have no signal on some 16E channesl... ????

tinto de verano