sky dish 60cm zone 2 with 28e 19e 13e

[everton]

having problems getting all three to work on one dish .i live in south wales ive took my 80cm dish down the due to mrs keeping on saying it to large. and now replaced with zone 2 60cm raven sky mesh dish and iam not getting the three to work together . is the dish a little to small. ive been up and down the ladder all day .on the the 80cm i had lnb 19e prime center and then 13e to the right if you were looking at the front of the dish. then 28e to the left looking at the front of the dish and set up the same on the zone 2 dish but signal to low on hotbird and no picture. any help will do

[echelon]

you mean like this sticky ?

https://www.satpimps.co.uk/showthread.php?t=71846

or this one ?

https://www.satpimps.co.uk/showthread.php?t=60102

[Bbigfoot]

Hi everton,

Ever thought of a Motor.

I had you missis pop in, your dish is to BIG.
So I bought a £65 motor, Zone 2 60cm Dish. (2, U Bolts from Gearbox).
Bolted motor onto S@y Bracket (No need for bigger wall bracket with small dish).

Connected Cable to (In) on motor. bought a (F cable loop, 99p) connected
Motor to Dish.
Im at (55n Toon) so my highest Satelllte is Thor 1w. pointed at Thor, loaded
Channel setting for Motor, Picked BBC World Channel on Thor 1w. Pickedup BBC World withSig Quality of 89%.

Now pickup 30w Hipasat 97% Signal, through to 42e ******* 100% Signal.
28e..19e..13 are all spot on, as are the other 10 satellites the Zone 2 mesh dish picks UP.

BF...