Unofficial dream elite v.133dv3

[m14h]

Unofficial dream elite v.133dv3 phoenix edition any tested this image if whats it like?

[EDGE]

Yes m8,ive just tried putting it on my Original DM800 and now i cant do fook all with it,all i get come up on the oled is,
ERRO1 NO CA FOUND.tried to re-flash it but theres no connection to be had with Dreambox.I put the correct Original file in aswell so fook knows whas happened,only tried it cuz my Gemini image kept going wrong.Anyone know if i can recover it??,thanx.

[m14h]

i only tried it on multiboot it worked for me which link you tried because theres links for clone models there to

[EDGE]

[CODE]http://hotfile.com/dl/70646309/5d3ef5b/SSL76dm800-de-133dv3PHOENIX-dm800-20092010.rar.html (ORIGNAL DM800)[/CODE That link m8

[saintomer1866]

Thanks Edge,
I was going to have a look but I'll be giving this a miss then for the time being:respect-055:
St.O

[antrabe]

Unofficial dream elite v.133dv3 phoenix edition can anyone install on flash original dream ?

[m14h]

[CODE]http://hotfile.com/dl/70646309/5d3ef5b/SSL76dm800-de-133dv3PHOENIX-dm800-20092010.rar.html (ORIGNAL DM800)[/CODE That link m8
that link didnt work for me i used this one filedude.com/download/CIylStf5IN3449ba1bdb
@edge did you manage to get it sorted

[m14h]

try flashing official dm image if you can through browser or dreamup then try what ever image you prefer i did it like that once i had same problem, you can get the official image from dream multimedia website.

[EDGE]

Just tried that also m8,still keep getting "file to big".Ill mess some more tomorrow after work,many thanx for your help tho m14h,much appreciated.

[ozzsurf]

from арчи on sat-universe



ATTENTION! DREAM ELITE V.133DV3 PHOENIX
Attention to all users of DM800HD originals and clones please dont put flash DREAM ELITE V.133DV3 PHOENIX EDITION
I ask other colleagues not to put the link for this image This image is a DISASTER, Dreambox killer.. Be careful if you insert this image you will have a problem with dream!!!!!!!!

[m14h]

- Unplug all connections from DM, only leaving ethernet cable (straight cable if going to a router) and serial connection to your PC, If using a USB --> Serial converter, make sure you have correct drivers installed (Confirm in control panel --> System--> Device manager --> Ports on XP). Note your COM port of your connection.

- Ok firstly use latest dreamup, make sure you got 'network' box checked and enter an IP address in the same subnet as your router. this will be the same first 3 digits only altering the last digit (as your subnet mask will be 255.255.255.0), enter a value you know to be free (I chose 100)

- Confirm that you have correct COM port selected

- Select CONNECT

- Plug back in mains on DM (dreamup should load the flashloader and then display the error CA error etc, press OK)

- Dont waste your time on 'Enforcer' or 'dream_fix' (ie. the tools that activate the flash button within dreamup), you will only get the error message that says 'File Too Big' error.

- Press OK on error message (you should now have an IP address assigned to your DM and displayed in the front panel of your DM)

- Open browser window and type in DMs IP in the address bar

- Wait for DM welcome window (I found this took a long time to load, more so after selecting a .nfi image that had a different Second stage BL to my corrupt version, so be patient! :sleeping: )

- Note the value of the secondstage bootloader (this is very valid if this is your first attempt at trying the repair and no other firmwares have been loaded)

- Press on 'device upgrade' select a .nfi build that has the same second stage loader that was on your DM before the 'CA error' (If you dont know you'll have to keep rebooting and repeating the process, trying different .nfi images until you match it ;( )

- Once the secondstage BL match is made, you'll find that the unit boots past the 'error' message and all appears as it should :thumbsup:



NOTE: This worked for me on my GENUINE DM800 and saved £99+del repair fee. Use at your own risk if your attempting on a clone version (I hear they can be very sensitive with Second stage BootLoaders)

[EDGE]

Just sorted it m14h m8,just got up for work and turned pc on,i then noticed that my usb to serial converter was set to com 5 where as Dreamup would only list com 4,anyway,tried your earlier post and all went well,now got gemini image back on and all working well:woot-035:,many many thanx for your help m14h,cant thanx you enough buddy:respect-040:

[m14h]

im glad you you got it sorted because i was running out of things to try lol

[tx0]

This fw works on my clone (2.01) like a charm.