TM-7100 Triple tuner ?

[Sathappy]

Anybody here has a TM-7100 Triple tuner ?
I would like to know if works (cccam for example) like TM 6900...
and if it's still supported with Phantom patch.... Thanks

[Giga]

latest: Phantom patch-TM7100HD_07-09-2010-131p.stb
very similar to 6900 HD Super: newcamd ok, cccam not 100% sure, perhaps other members can confirm this

[thijs]

I have one like to know more about cccam very hard to get info anywhere

[Sathappy]

I noted that some members here have this 7100 HD:

charlie (08-09-2010), descati (12-09-2010), Jaycee (11-09-2010), KAREL (10-09-2010), Lily cork (16-09-2010)

The Following 5 Users Say Thank You to ^^COMPASS^^ For This Useful Post:
albatros501 (18-08-2010), Blu-ray (22-08-2010), descati (22-08-2010), FENEKI (18-08-2010), Lily cork (16-09-2010)


Please tell us your opinions... Thanks 2 all !

[Giga]

@thijs
could you confirm cccam (select Newcamd field, press OK) is there when you accessed the Server menu? While viewing a channel enter channel 8 2 8 1 from remote pin 0000 if you did not change this. Should be similar to TM-6900 HD Super (https://www.satpimps.co.uk/showthread.php?t=114462) <= click here

[thijs]

yes i can confirm ,after that its very confusing for me very new to computer stuff do i have to set up my router or not, is my tm7100 non linux,i can't get it to share as i read in some threads with my computer so i need some basic advice before i try buying a "c-line"and what exactly is this "newcamd"

[thijs]

I noted that some members here have this 7100 HD:
Please tell us your opinions... Thanks 2 all !

think its a very good reciever, the way you can record a channel and watch a different channel at the same time,would like to see changed that when you set the timer for recording that the recording would happen without swithing to that channel when your watching something else,but that the the recording would happen on tuner 2 in the background apart from that very happy. looks like the time for patchig is nearly to an end
cccam is my next step very hard to get info for this ,giga is very helpfull
but for a lot of newbie's a bit to advandced i think :respect-040:

[Giga]

yes i can confirm ,after that its very confusing for me very new to computer stuff do i have to set up my router or not, is my tm7100 non linux,i can't get it to share as i read in some threads with my computer so i need some basic advice before i try buying a "c-line"and what exactly is this "newcamd"
don't run, walk first, advice here: stay away from payservers!
TM-7100 is non linux receiver, you can't load other programs, ...
you don't need to portforward (cccam/newcamd are clients only on this receiver)
in short newcamd is a similar protocol like cccam to share viewing cardcheck some of these:
if you don't get connections:
https://www.satpimps.co.uk/showthread.php?t=134066
https://www.satpimps.co.uk/showpost.php?p=714820&postcount=13

[thijs]

don't run, walk first, advice here: stay away from payservers!
TM-7100 is non linux receiver, you can't load other programs, ...
you don't need to portforward (cccam/newcamd are clients only on this receiver)
in short newcamd is a similar protocol like cccam to share viewing cardcheck some of these:
if you don't get connections:
https://www.satpimps.co.uk/showthread.php?t=134066
https://www.satpimps.co.uk/showpost.php?p=714820&postcount=13

try in a while let you know how i got on

[FENEKI]

Firstly I'd like to re-iterate that the Spiderbox is extremely good value for money though I don't have one

Linux box can serve Works cs 100% on TM7100 CCcam

need to add the last add-on

i got too of tm6900super for bout 14 months i cant bin them afford too.

remember we dont for get TM only receive.

l have be asking alots of people who have the dreambox.to get a share from them but same people said no and some people did not send back.


and l thing there is lots of people useing TM6800super TM6900super TM7100 had the same problem like me m8

the tm has only 1 problem and that the people who support it are all running to the spiderbox

I will continue to use my tm6900hd super for cs for time being as it meets




TM 6800 HD Super
TM 6900 HD Super
TM 7100 HD
add-on

[Sathappy]

Thanks for your opinions here... It's very important for me... because I would like to buy one 7100 HD!
well, then can we say that cccam is working 100% in 7100, like 6800 and 6900 ?
Confirmed?

[thijs]

@ giga
do i need servers to set it up to get any conection on a newdcam
and do i turn off my firewall in my router all to confusing for me yet m8
and why should i stay away from payservers

[Giga]

@ giga
do i need servers to set it up to get any conection on a newdcam
No, need a working test/free c-line (cccam) or n-line (newcamd) from a server. If needed you can setup Fausto as newcamd server on your computer in your home network to test connecting before you go on WAN.

and do i turn off my firewall in my router all to confusing for me yet m8
Never turn off firewall in computer or in router!

and why should i stay away from payservers
Will payservers cause the end of our hobby (https://www.satpimps.co.uk/showthread.php?t=137763) <= click here
Print the relevant info from previous links on paper and take your time to read these. All info is there, tested and found to work.

If you have further questions on any of these, please do ask, careful what you ask (see below). Whenever possible we (Technomate users) will try to answer.

Satpimps Forum Rules (https://www.satpimps.co.uk/showthread.php?t=56249) <= click here

9) NO card share server requests.

Please do not post requests for card sharing servers etc
Any requests will be removed and the ppl involved banned.
Technical discussion on CS is ok

[FENEKI]

Thanks for your opinions here... It's very important for me... because I would like to buy one 7100 HD!
well, then can we say that cccam is working 100% in 7100, like 6800 and 6900 ?
Confirmed?

@ Sathappy M8

if you wont to buy it up to you mate

support is loseing out slows slows but as we are giveing support to are TM for helping one a noner

Linux box can serve cccam is working in TM7100 TM6900super TM6800super remember we dont for get TM only receive m8

[thijs]

Thanks lads

Got connected to a test line
It's a simpel as plugin to router and play (and 8281 menu)
could not have done it without the help of Feneki
and giga ,thanks for the" technomate" and technomate users helping one an other:respect-055:
made my day any way