billybot
03-10-2010, 09:23 PM
I have an eagle and a dm800 clone. The eagle powers the motor and the dm800 is fed from a twin lnb, so wherever the dish is pointing that's what sat I can watch on the dm800. The eagle has all the motorised settings and the dm800 is set to usals, simply because every channel is highlighted rather than greyed out. This has worked for me for 6 months and with every excellent settings list of Vhanibbal i have installed.
Anyway today i went to view channels on 1 west, but they were all grey!!
So I pressed the green button and noticed that previously thor was at 0.8w and I don't know how but it changed itself to 1.0w, thus all channels being grey.
Now I know that when this happens on the eagle it's easy to fix, all you do is go to sat config - add new sat - and highlight 0.8w in the drop down box, job done. but I'm wondering firstly why this has happened and secondly what can i do to remedy it.
Thanks all
Anyway today i went to view channels on 1 west, but they were all grey!!
So I pressed the green button and noticed that previously thor was at 0.8w and I don't know how but it changed itself to 1.0w, thus all channels being grey.
Now I know that when this happens on the eagle it's easy to fix, all you do is go to sat config - add new sat - and highlight 0.8w in the drop down box, job done. but I'm wondering firstly why this has happened and secondly what can i do to remedy it.
Thanks all