TS HD -> mpg

[maciek]

How to convert HD TS records to any container for example mpeg? I tryed PVAStrumento but it works with SD TS records but can raport errores during HD recordings transforation.
Any idea?

[ManikM]

try DVR-Studio (german)

[Dave5118]

What's the file extension?

Mkv2vob can remux to mpg, but is limited to the types of files input, you may have to run it through tsmuxer or tsremux or similar first to get it to m2ts for example.

[Gone_Fishing]

Do you want to convert them or just put them in another container both are very different things one requires encoding and one doesn't, it also depends on what codec the original stream is MPEG or H.264

Why do you want to change them anyway ?


TNT

[ssjenkins]

I managed to do it with Total Video Convertor . The video is a bit jumpy but it's watchable . Converting from "HD" TS isn't that easy . DVR Studio won't do it . At least V1.56 won't .

Sammy

[maciek]

What's the file extension?

Mkv2vob can remux to mpg, but is limited to the types of files input, you may have to run it through tsmuxer or tsremux or similar first to get it to m2ts for example.

The file extension is TS

[maciek]

Do you want to convert them or just put them in another container both are very different things one requires encoding and one doesn't, it also depends on what codec the original stream is MPEG or H.264

Why do you want to change them anyway ?


TNT

I want any container. MPG, MPEG, AVI, MKV because I use A110 PopcornHouer for playback my Video/Audio/Photos

[Gone_Fishing]

I'm a bit rusty on the files the A110 supports cant belive it doesn't support TS files maybe its just ts/h.264 ?

If they are h.264 you could probably mux them into M2TS with "tsMuxeR" I'm guessing it plays M2TS/h264, no encoding required just changing container its worth a try assuming they are h264 media info would tell you this

_http://www.smlabs.net/tsmuxer_en.html

Alternatively off the top of my head demux them with tsMuxeR and them mux them into mkv with mkvmerge again no encoding so original quality

_http://www.videohelp.com/tools/MKVtoolnix

Just a small note if you go the mkv route make sure you select the video track then go to "Format specific options" and put in the correct fps

BTW you can drag and drop your files in onto the input window on both apps


TNT

[Dave5118]

The file extension is TS

mkv2vob should let you remux it to a mpg, m2ts, mp4 or avi. You can change the container in the configuration tab.

Or..... just follow TNT's steps above ;)

[Gaza]

EM Total video conversion does the job fine

[Gone_Fishing]

Personally I would use mkv container as its very versatile supports most audio and video formats

You certainly don't want to be encoding anything if you don't have to takes to long


TNT

[Dave5118]

Ignore!!!!!!!missed the post about Popcorn hour......

[Gone_Fishing]

That reminds me PS3 media server supports using tsMuxeR on the fly over DLNA and it has a Popcorn Hour config or at least the beta version does so it should work fine just make sure you have tsMuxeR at the top under video files engine


TNT

[maciek]

Do you want to convert them or just put them in another container both are very different things one requires encoding and one doesn't, it also depends on what codec the original stream is MPEG or H.264

Why do you want to change them anyway ?


TNT

The Sat operator I play with (Cyfrowy Polsat) use MPEG for SD and 264 for HD. I dont want to recode to any other. Just to store recorded files on my home NAS for future playback. I use Popcorn A110 for Audio/Video playback over home network.
So I can remux TS SD to mpeg container without problems. But the problem is HD content

[Gone_Fishing]

But the problem is HD content

I told you in post 8 what to do both mpeg and h264 can go in mkv and M2TS


TNT

[maciek]

I'm a bit rusty on the files the A110 supports cant belive it doesn't support TS files maybe its just ts/h.264 ?

If they are h.264 you could probably mux them into M2TS with "tsMuxeR" I'm guessing it plays M2TS/h264, no encoding required just changing container its worth a try assuming they are h264 media info would tell you this

_http://www.smlabs.net/tsmuxer_en.html

Alternatively off the top of my head demux them with tsMuxeR and them mux them into mkv with mkvmerge again no encoding so original quality

_http://www.videohelp.com/tools/MKVtoolnix

Just a small note if you go the mkv route make sure you select the video track then go to "Format specific options" and put in the correct fps

BTW you can drag and drop your files in onto the input window on both apps


TNT

I can not remux HD TS using tsMuxeR. The error is raported - look attached file

[maciek]

I told you in post 8 what to do both mpeg and h264 can go in mkv and M2TS


TNT

I tryed but the error was raported (look attachment)

[Gone_Fishing]

Can you upload a small clip somewhere so I can download it and have a go think I ran into this problem once, 50MB - 100MB should do :king-042:


TNT

[maciek]

Can you upload a small clip somewhere so I can download it and have a go think I ran into this problem once, 50MB - 100MB should do :king-042:


TNT

OK, I will prepare sample file today

[Dave5118]

I had the same problem with the 'trp' files from a spiderbox, TsRemux worked ok though.

[maciek]

Can you upload a small clip somewhere so I can download it and have a go think I ran into this problem once, 50MB - 100MB should do :king-042:


TNT

The minimum recording time on ICECRYPT is 3 min. So HD TS file is aprox. 270 MB. I try to zip file but it is impossible to upload to the forum. How can I pass You the ts file?

[Gone_Fishing]

Did you try Dave5118 solution using TsRemux ?

You can upload here

_http://www.sendspace.com/


TNT

[zubas]

Try Cypheros TS-doctor
and TS format converter in Tools to convert Transport stream in mkv.;)

[maciek]

Did you try Dave5118 solution using TsRemux ?

You can upload here

_http://www.sendspace.com/


TNT

OK, I started upload, but my upstream is only 512 kbps so It will take about 1,5 h. Be pacient ;-)

[maciek]

Did you try Dave5118 solution using TsRemux ?

You can upload here

_http://www.sendspace.com/


TNT

OK, downloading complete.
File Name: P.ts
Size: 257.77MB | Description: Sample of HD TS file
_http://www.sendspace.com/file/tlpq42

So good luck!

[Gone_Fishing]

Afraid the file was corrupt for me :ack2:


TNT

[maciek]

Afraid the file was corrupt for me :ack2:


TNT

Hmmm. I will copy once more from Icecrypt to my PC and to desired lokation. The file is playable when running direct from ICECRYPT internal HD. Probably there is H.264 compilant wideo stream

So please wait

[zubas]

After fixing record with TS- doctor, fixed file noramly played in VLC -

http://img820.imageshack.us/i/tsd1.jpg/
http://img201.imageshack.us/i/vlcsnap2010102109h32m59.jpg/

its polsat HD
CL: Inter vs Totenham

[maciek]

Hmmm. I will copy once more from Icecrypt to my PC and to desired lokation. The file is playable when running direct from ICECRYPT internal HD. Probably there is H.264 compilant wideo stream

So please wait

So once more downloaded file:

You have successfully uploaded a file called P.ts (257.8 MB), to sendspace.
Description: Sample of TS HD fileYou can use the following link to retrieve your file:

_http://www.sendspace.com/file/mht88y

[maciek]

After fixing record with TS- doctor, fixed file noramly played in VLC -

http://img820.imageshack.us/i/tsd1.jpg/
http://img201.imageshack.us/i/vlcsnap2010102109h32m59.jpg/

its polsat HD
CL: Inter vs Totenham

Wow. IT IS! I will try. But why fixing is necesery? Icecrypt record HD content in any corupted format?

[zubas]

No, Icecrypt record HD content is OK.
But when try to play that record in other software player or in other hardware may be some of the erors:
Sync Byte Error
PCR Repetition Rate
PAT Error
Continuity Count Error
PMT Error
Transport Error
CRC Error
PCR Error
PID Error
Transport Error Indicator
PCR Discontinuity Error
CAT Error ....

In yours case there was some minors PMT(Program Map Tables) and PAT (Program Association Table) erors and "doctor" fix it. :respect-055:

[mrbleu500]

If you can play the file on VLC, you can also convert it to another format with vlc.

I have found it the quickest and easiest video file converter at the moment.

[maciek]

No, Icecrypt record HD content is OK.
But when try to play that record in other software player or in other hardware may be some of the erors:
Sync Byte Error
PCR Repetition Rate
PAT Error
Continuity Count Error
PMT Error
Transport Error
CRC Error
PCR Error
PID Error
Transport Error Indicator
PCR Discontinuity Error
CAT Error ....

In yours case there was some minors PMT(Program Map Tables) and PAT (Program Association Table) erors and "doctor" fix it. :respect-055:

So I will try!

[Gone_Fishing]

Looks like you need to find a copy of TS- doctor as it seems to work well

Your sample is probably becoming corrupt either during the upload or download or on send space which is why you should Rar files just tried again still corrupt

But as Dave5118 said TsRemux works fine just tried changing it to m2ts and demuxing to raw streams both of which can be used in MKVtoolnix (mkvmerge) to change to mkv assuming you don't just keep them as m2ts


TNT

[maciek]

No, Icecrypt record HD content is OK.
But when try to play that record in other software player or in other hardware may be some of the erors:
Sync Byte Error
PCR Repetition Rate
PAT Error
Continuity Count Error
PMT Error
Transport Error
CRC Error
PCR Error
PID Error
Transport Error Indicator
PCR Discontinuity Error
CAT Error ....

In yours case there was some minors PMT(Program Map Tables) and PAT (Program Association Table) erors and "doctor" fix it. :respect-055:

OK, works fine! :bravo-009: But do Ypu know any similar tool for Linux? TS-Doctor does not work under WINE or CrossOver:confused:

[zubas]

I am no so familiar with linux but this should be good command line for TS doctor

"> ts-doctor-nogui -i input.ts" == for analysis
"> ts-doctor-nogui -i input.ts -o output.ts" == for fixing

it works with some older releses ...

[maciek]

I am no so familiar with linux but this should be good command line for TS doctor

"> ts-doctor-nogui -i input.ts" == for analysis
"> ts-doctor-nogui -i input.ts -o output.ts" == for fixing

it works with some older releses ...

OK, Probably it works with ver 0.7 (very old). Do You know the source for downloading such version? It is because today trial ver does not support such syntax.