E2 1.0.25 - Test report

[pr2]

Hi,

I think it is the good time to start a new thread to report bugs discovered with E2 1.0.25. So let's go:

Satellite scan is working in this version but DiseqC support, as mentioned by the team, is not yet fixed. So if you have a DiseqC A/B configuration you can only scan the default sat (for example Hotbird if it is set to DiseqC-A).

1°) Upgrade not possible from E2 1.0.21 to E2 1.0.25
And indeed I also confirm that it is not possible to switch from E2 1.0.21 to E2 1.0.25 without going back first to the original firmware (0.9.5020 for example).

2°) No more sound in .vob file via Scart (didn't test via HDMI)
For me there is a regression in the multimedia part, since the .vob I test in previous version was playing fine with sound and I have no more sound with this latest version. My Azbox is connected via Scart (no HMDI).



General
Complete name : G:\test\thx_the_simpsons.vob
Format : MPEG-PS
File size : 24.8 MiB
Duration : 34s 468ms
Overall bit rate : 6 035 Kbps

Video
ID : 224 (0xE0)
Format : MPEG Video
Format version : Version 2
Format profile : Main@Main
Format settings, BVOP : Yes
Format settings, Matrix : Default
Duration : 34s 468ms
Bit rate mode : Variable
Bit rate : 5 467 Kbps
Nominal bit rate : 8 260 Kbps
Width : 720 pixels
Height : 480 pixels
Display aspect ratio : 16:9
Frame rate : 29.970 fps
Standard : NTSC
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Interlaced
Scan order : Top Field First
Bits/(Pixel*Frame) : 0.528
Stream size : 22.5 MiB (91%)

Audio
ID : 128 (0x80)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Duration : 34s 336ms
Bit rate mode : Constant
Bit rate : 448 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 1.83 MiB (7%)


3°) Mediaplayer skins is wrong when used on a 16:9 format CRT screen.

I start it with the parameter in bootup:



insmod /lib/modules/2.6.22.19-19-the_ripper/extra/em8634dvb.ko options="-analog -f PAL_BG -asp 16 9"


That's the only way to have a 16:9 aspect ration on the SCART.
In this format the Mediaplayer skin is still buggy, I miss the left and right part of the Mediaplayer window.

4°) RCU key mapping question

RCU: TV/Radio key is mapped to TV channel list
Resolution is mapped to Radio channe list

Is it the expected behavior?

5°) RCU Check/Select button gives access to audio channel selection, but when switching to another language no sound, even if we come back to the original sound still no sound. A good FTA channel to test this is Euronews.
Test done on Hotbird 13° E.

Pr2

[[0_o]]

Great review @pr2! I'm sure more reviews like these will help the team :)

btw... maybe this could help you about mediaplayer skin. In mediaplayer try the default skin, and not the skin made for Azbox :)

[The_Ripper]

@pr2
1) That will fix telesat
2) sattomy doesnt have right now free time to work on gstdvbmediasink plugin so dont expect soon fix, I will ask him to publish source code here and what he changed in that plugin so someone else can continue.
3) For now thats the only way changing anything regarding video output/size, have other priority's right now.
4) Yes
5) STC Sync isnt activated for audio/video so changing audio to different pid, or playing same audio pid for a while will lost audio.

[pr2]

@The_Ripper,

Thank you for all the informations.
If I can help in any way just ask...

@O_o

Yes I already know that changing the skin fix the problem, I already report it myself in the never ending thread. But anyway thanks to have reply it here so if somebody read it, he will know the work around too.

Pr2

[halabessa]

@ the_Ripper

Great great job for all the team.
Just have a question:
Is anyone of you working to sort out the vfd display (mean it's E2 drivers) to have channels names on it like original firmware?

Thanks for your support.:respect-040:

[[0_o]]

@ the_Ripper

Great great job for all the team.
Just have a question:
Is anyone of you working to sort out the vfd display (mean it's E2 drivers) to have channels names on it like original firmware?

Thanks for your support.:respect-040:

Thats a good question and something that I've already question to myself too. :)

I know isnt a essencial thing, but will be supported too in E2 for Azbox's?? I like a lot to see the channel name there :302:


:bravo-009:

[The_Ripper]

For VFD to display, E2 need to be patched. I am right now busy with dvb driver stuff.
As I mention few times allready we are using OE 1.6 version and BUILD machine as DM800, so anyone can help and patch what is needed in E2 code as Kathrein,Ipbox guys done it ...

[[0_o]]

For VFD to display, E2 need to be patched. I am right now busy with dvb driver stuff.
As I mention few times allready we are using OE 1.6 version and BUILD machine as DM800, so anyone can help and patch what is needed in E2 code as Kathrein,Ipbox guys done it ...

I can try to give it a hand, but I'm not a profissional coder... so I dont know how much can I give for the project :frown:

But, I can try and look around to see if I get some stuff to work about VFD display.

Thanks once again ;)

[antonis13]

how to install cccam 2.1.14 manual to E2 1.0.25, i can't it from addons.
thanks

[kebien]

You can use DCC (a dreambox tool)

FTP CCcam.mipsel into /usr/bin ,rename to CCCam ,chmod 755 (right click > attributes > check 755)
FTP CCCam.cfg into /etc
edit CCcam.cfg accordingly.

To start it
telnet into the azbox and type
CCcam &

If you want to debug what CCcam is doing type

CCcam -dv &

[hfmls]

CCcam looks for CCcam.cfg in /var/etc/ not in /etc :S
wich version do u use?
also, HD and SD channels in mpeg4 not working. DVB-S2

[antonis13]

You can use DCC (a dreambox tool)

FTP CCcam.mipsel into /usr/bin ,chmod 755 (right click > attributes > check 755)
FTP CCCam.cfg into /etc
edit CCcam.cfg accordingly.

To start it
telnet into the azbox and type
CCcam &

If you want to debug what CCcam is doing type

CCcam -dv &

thanks it work

[hfmls]

thanks it work

with wich version of cccam?
mine doesn't work. always goes to seach in /var/etc/
any help please? if i could manage to make cccam search into /etc/ for CCcam.cfg i could have this auto. |:

[marse212]

It works ... try this

/usr/bin/CCcam -C /etc/CCcam.cfg &

[hfmls]

yes i know :) but i am trying to use Carp95 method.
manually i know how to. but i wanted to use /var/etc/ so i could run autoscript after reboot. but everytime i reboot var etc disappears.

[Smudger]

How do you put box into standy?

[pr2]

Press menu button and in the menu on-screen you have another menu with the option to set the box into stand-by. But once in stand-by I think that there is no key predefine to wake it up.

[kebien]

yes i know :) but i am trying to use Carp95 method.
manually i know how to. but i wanted to use /var/etc/ so i could run autoscript after reboot. but everytime i reboot var etc disappears.
You cannot write in /var/etc by the way,you won;t be able to put any script there.
E2 use a simlink /var/etc to /etc so naturally,it works if you put things in /etc


You can put your scripts in /usr/bin chmod755 and call the script from anywhere,even from remote.

[hfmls]

i didn't want to put any script in var/etc.
i wanted to put CCcam.cfg and i managed to do that even after reboot with The_Rippers help.
But there's no need now, Matrix10 did great ipk packages with scripts :)

[[0_o]]

;760042']I can try to give it a hand, but I'm not a profissional coder... so I dont know how much can I give for the project :frown:

But, I can try and look around to see if I get some stuff to work about VFD display.

Thanks once again ;)

Hello again. :)

Well, I think I need just a little help. I'm trying to find some source code for VFD display from another receivers that use enigma2, but I cant find it correctly I think. For VFD display, I should look inside Plugins in python folder, right?

Thanks

[kebien]

i didn't want to put any script in var/etc.
i wanted to put CCcam.cfg and i managed to do that even after reboot with The_Rippers help.
But there's no need now, Matrix10 did great ipk packages with scripts :)

Yes there is a need to know,because installation scripts do not work for everyone.
It should work in theory,but it doesn't in practice.
The best way is to know exactly what you are doing.

You cannot put ANYTHING in /var,whether is a script or a cfg,this is why there are simlinks created.
You also have other simlinks in E2 you should know about.

[digihoe]

This release + the new files are working good. USALS works, but I needed to send channellist to get it to work.

USALS -OK!

Very good work The_Ripper and his team!