E2 .27 channel list for Hotbird and Astra?

[4@@@@]

Since Version .27 I'm not able to get any channel working.

I have a monoblock with Hotbird AA and Astra AB. Last time I had success was .21 with cccam but only on Hotbird because Diseqc was not supported yet.
I also tryed from hdd and from flash.

eDVBSatelliteEquipmentControl::se tSlotNotLinked(0)
diseqcmode: diseqc_a_b
eDVBSatelliteEquipmentControl::ad dLNB(0)
eDVBSatelliteEquipmentControl::se tLNBSatCR(-1)
eDVBSatelliteEquipmentControl::se tLNBNum(1)
eDVBSatelliteEquipmentControl::se tLNBLOFL(9750000)
eDVBSatelliteEquipmentControl::se tLNBLOFH(10600000)
eDVBSatelliteEquipmentControl::se tLNBThreshold(11700000)
eDVBSatelliteEquipmentControl::se tLNBIncreasedVoltage(0)
eDVBSatelliteEquipmentControl::se tRepeats(0)
eDVBSatelliteEquipmentControl::se tFastDiSEqc(0)
eDVBSatelliteEquipmentControl::se tSeqRepeat(0)
eDVBSatelliteEquipmentControl::se tCommandOrder(0)
eDVBSatelliteEquipmentControl::se tDiSEqcMode(1)
eDVBSatelliteEquipmentControl::se tToneburst(0)
eDVBSatelliteEquipmentControl::se tCommittedCommand(0)
eDVBSatelliteEquipmentControl::se tUncommittedCommand(0)
eDVBSatelliteEquipmentControl::ad dSatellite(130)
eDVBSatelliteEquipmentControl::se tVoltageMode(0)
eDVBSatelliteEquipmentControl::se tToneMode(0)
eDVBSatelliteEquipmentControl::se tLNBSlotMask(1)
eDVBSatelliteEquipmentControl::ad dLNB(1)
eDVBSatelliteEquipmentControl::se tLNBSatCR(-1)
eDVBSatelliteEquipmentControl::se tLNBNum(1)
eDVBSatelliteEquipmentControl::se tLNBLOFL(9750000)
eDVBSatelliteEquipmentControl::se tLNBLOFH(10600000)
eDVBSatelliteEquipmentControl::se tLNBThreshold(11700000)
eDVBSatelliteEquipmentControl::se tLNBIncreasedVoltage(0)
eDVBSatelliteEquipmentControl::se tRepeats(0)
eDVBSatelliteEquipmentControl::se tFastDiSEqc(0)
eDVBSatelliteEquipmentControl::se tSeqRepeat(0)
eDVBSatelliteEquipmentControl::se tCommandOrder(0)
eDVBSatelliteEquipmentControl::se tDiSEqcMode(1)
eDVBSatelliteEquipmentControl::se tToneburst(0)
eDVBSatelliteEquipmentControl::se tCommittedCommand(1)
eDVBSatelliteEquipmentControl::se tUncommittedCommand(0)
eDVBSatelliteEquipmentControl::ad dSatellite(192)
eDVBSatelliteEquipmentControl::se tVoltageMode(0)
eDVBSatelliteEquipmentControl::se tToneMode(0)
eDVBSatelliteEquipmentControl::se tLNBSlotMask(1)
sec config completed

DVB service failed to tune - error 2

Any hint or working list apreciated.

[pr2]

Hello,

Can you please specify which hardware you have: Elite / Premium?

There is already a discussion around some Elite were the tuner doesn't work with the driver.

Pr2

[Smudger]

Also some older Premiums.

[4@@@@]

Hi - yes I just read about it. My Box is from March 2009. It is a Permium (without a fix for CAM) and one internal HDD - no second tuner.

INterseting is, that it worked very good with .21 (without diseq).

[4@@@@]

I just installed the new em8634dvb.ko from the other thread. I had one time a working chanel - also with my card. After a reboot it is gone now.
Also the 99% as described in the other thread - hoping for the fix - or I will go back to .21.

An exceprt ot the enigma2 startup

VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
timeout 0012!
timeout 0000!
DVB service failed to tune - error 2
RemovePopup, id = ZapError
AddPopup, id = ZapError
no ancillary data in audio stream... abort radiotext pes parser
Timeout!
SCAN: the current channel's ID was not corrected - not adding channel.
ignore sdt update data.... incorrect transponder tuned!!!
timeout 0014!
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler] **** RTC not ready :(
nr_read 7006 nr_write 372
sum 7378 prev_sum 0
hdd was accessed since previous check!
[IDLE] 0 600 False
nr_read 149 nr_write 13
sum 162 prev_sum 0
hdd was accessed since previous check!
[IDLE] 0 600 False

Very nice error message ;)

[4@@@@]

Problems are fixed with .28.

Thanks to The_Ripper et.al.

[4@@@@]

To get it working with Hotbird and Astra take this here (http://matzesetting.brinkster.net/)