new 733p patch

[tony52]

new 733p patch out i tested on my TM 6900 super+ works ok, don't know what its new from 732p

[sat_rrstm]

Can you please check if Biss pack - Hotbird is back?

[Sathappy]

And where is the 733p ?

[tony52]

Can you please check if Biss pack - Hotbird is back?

i can only see 3 or 4 channel

[Matrix2010]

It seems that no 733 is present in Firmware section. Where can I download it?

[sat_rrstm]

It looks like no one is interested in this new 733p since there isn't any info on any improvement,so forget about it,mate.

[holmroad]

But where is it please - ANYBODY? Please!!:respect-051:

[bob]

Uploaded to Technomate.

[TheGod]

new 733p patch out i tested on my TM 6900 super+ works ok, don't know what its new from 732p

I have still not checked because I am not at home but on other forums they are reporting that it opens both Bulsat and C+NL.

[mariop1]

i can confirm it opens both.

[KnockJohn]

OK I've updated. Firstly, on completion of the upload, the box, instead of re-booting turned off and displayed WRITE OK in the front pannel. This had me a bit worried. I turned off and on at the back and all was OK.

The box now opens TNT on Astra 19 as well as C+NL (don't have 39° so cannot comment on Bulsat).

[titus]

OK I've updated. Firstly, on completion of the upload, the box, instead of re-booting turned off and displayed WRITE OK in the front pannel. This had me a bit worried. I turned off and on at the back and all was OK.

The box now opens TNT on Astra 19 as well as C+NL (don't have 39° so cannot comment on Bulsat).

same for me, re rebooting had to also turn off at back as well, bulsat is open ok.

biss on 5 w open also

[tony52]

OK I've updated. Firstly, on completion of the upload, the box, instead of re-booting turned off and displayed WRITE OK in the front pannel. This had me a bit worried. I turned off and on at the back and all was OK.

The box now opens TNT on Astra 19 as well as C+NL (don't have 39° so cannot comment on Bulsat).

append to me to

[TheGod]

The box now opens TNT on Astra 19

Can you confirm wheter or not the TNT HD channels (TF1 HD, 2 HD, Arte HD and M6 HD) are open?

[KnockJohn]

HD and SD open

[steph64uk]

C+NL and Bulsat opening for me with this patch (plus latest softcam). Haven't checked TNT channels yet though if SD and HD channels are open then this is a patch we've all been waiting for :)

Uploading patch was same as before only this time I had to switch box off and on again at the back as others have commented on!!

[satpaul]

Bulsat and Canal Digitaal 19 east where both open on 732 it seems it Got TNT on 19 east thats new

[holmroad]

I had a bad time trying to install patch 733P - on mine it didnt switch itself off & reboot as it had with previous patches, then the Add-On was the same, but it also usually causes a reboot. I also had no remote control communication until I'd totally powerd my TM6900HD Super off & on again!
I havent actually found any differences betweem 732P and 733P, but at least its working again following a 'cold' reboot where I had to switch power off at socket!:respect-050:

[tony52]

Can you confirm wheter or not the TNT HD channels (TF1 HD, 2 HD, Arte HD and M6 HD) are open?
yes open all the TNT included HD ones

[holmroad]

Can you confirm wheter or not the TNT HD channels (TF1 HD, 2 HD, Arte HD and M6 HD) are open?

Yes did notice these channels opened, but hadnt realised they were part of TNT package because I'm too lazy to look!
Still not a straightforward USB patch load though - as above post earlier!:respect-050:

[oldjiver]

Looking for TNT package on Lyngsat? Cant find it, is it known by any other name?

[drpaulos]

It is effectively a basic package version of what is listed as Canal Sat France on Lyngsat.

If you check the packages section of king of sat, you can see which channels are actually part of the TNT package.

[oldjiver]

Any of the three FFFs to look forward to?

[simford]

is the 733 exclusive to 6000 or can it be alright for 5200 super?

[sat_rrstm]

Be careful,it is exclusive to 6000 Super only series.
For your 5200D Super there is another new 143p dated 18-11-2010 available,do a search in the net for it.It promises the same updates as in 733p.

[bob]

New Phantompatch 184p is for TM 5000, in the Technomate 5000 series section. don,t use 733.

[simford]

New Phantompatch 184p is for TM 5000, in the Technomate 5000 series section. don,t use 733.

cheers mate

[sat_rrstm]

New Phantompatch 184p is for TM 5000, in the Technomate 5000 series section. don,t use 733.
But that 184p is not for Super series,is it?

[simford]

I'd appreciate if some one direct me to where I remind myself of how to patch the new patch?

is it
factory setting
orginal software
then the new patch?
there was a post in this regard but I can't find it. cheers

[sat_rrstm]

Please confirm first if you have a Super model or a non-super,and which one is the right patch for your receiver,you could destroy it if you pick the wrong patch.

[FENEKI]

I'd appreciate if some one direct me to where I remind myself of how to patch the new patch?

is it
factory setting
orginal software
then the new patch?
there was a post in this regard but I can't find it. cheers



143p dated 18-11-2010 Phantompatch-TM-5000 series Non Super

Phantompatch 143p is not for Super dont uses this on yours ok

no new patches are available for tm5400 super not out at the monement m8

[simford]

5200D super usb

[sat_rrstm]

@FENEKI mate,simford has stated he owns a TM-5200D Super model and I have seen the last Phantom 143patch(18-11-2010) for this model over at ************ place,you can check it yourself...

[simford]

@FENEKI mate,simford has stated he owns a TM-5200D Super model and I have seen the last Phantom 143patch(18-11-2010) for this model over at ************ place,you can check it yourself...



seems to make sense as the 184 is not compatible! I'll try the 143

[simford]

seems to make sense as the 184 is not compatible! I'll try the 143


which brings to the question where can I find it?

[FENEKI]

@FENEKI mate,simford has stated he owns a TM-5200D Super model and I have seen the last Phantom 143patch(18-11-2010) for this model over at ************ place,you can check it yourself...


hi mate on the download centre patch143p it saying Non Super

[bozoth]

TNT Package :

http://href.hu/x/dr5j

:) . :)

[bob]

There is a good patching guide by mrvee, referred to by echelon in the 5000 usb series section. At the end of the new Patch load you may have to do a "Hard Reset" switch of at the Mains Plug.
Warning: Do make sure the patch has finished loading, before switching off.

5000 series Super Patches uploaded.

[bob]

The Patches uploaded to 20-11-2010, 10:10 PM are for the super version, and the patches uploaded on 20-11-2010, 12:12 AM are for the USB Series
TM5300D_5200D TM5400CI. These are all in the Technomate 5000 series section.
Hope this clears up any confusion.

[martin007]

Hi ALL
I must admit I got a bit of a shock when it froze after I put patch 733 onto my TM super HD combo. I taught that was it My Box had died. But when I switched off at the back of box and than back on, with awaited breath all was well. *****oooooo. ??? :cheers2: :party:

[DJ2004]

Hi ALL
I must admit I got a bit of a shock when it froze after I put patch 733 onto my TM super HD combo. I taught that was it My Box had died. But when I switched off at the back of box and than back on, with awaited breath all was well. *****oooooo. ??? :cheers2: :party:

I had exactly the same problem, no reboot after flashing, the box was simply frozen. After I unplugged the power cord and switched the TM on again everything was ok:o15:

[holmroad]

This is all EXACTLY what I was saying earlier in this thread guys - my TM6900HD Super totally froze after loading patch 733P - before I had chance to load the Add-On and softcam - my box usually reboots itself after both the USB patch load AND the Add-On phase - but NOT with patch 733P!
I also posted earlier how I had to switch my box off at the mains to reboot it - all of which has NEVER been necessary with previous patches!:respect-055:

[gentlmen]

Here is the procedure how to get your TM back if something goes wrong.
Thanks to our great friend GIGA:respect-063::respect-063:


Patching

use the latest patch!
If you use a motorized dish take note on paper of its settings
other settings you may take a look at and take note:
System Settings
Time Settings
A/V Settings
- Display Format
RF Type & channel (if you use UHF antenne out to other TV's)
Digital Audio: PCM/DOLBY SPDIF/DOLBY HDMI
OSD Settings (on screen display)
Front Display Settings (blue light on/off, ...)
Password setting 0 0 0 0 (set yours and its behaviour)
IP Settings

use a fat32 formatted USB stick
Quote:
1 - Do backup by USB
Main Menu
USB
Data Transfer
If you get a choice [/USB1][/USB0] 1 is the stick, 0 would be the USB Harddisc, make your choice where to put your backup channellist
● Upload Channel
after this you find your current channellist with this format Year Month Day- Time when recorded 20091129-134035.CNDF (keep always a safe copy on your computer.
● Upload Key
after this you find your current softcam with this format Year Month Day- Time when recorded
20091129-134035.key
Exit to channel
8 2 8 1 Server List Window opens
(SAT) CSInfo Upload
after this you find your current CSinfo with this format Year Month Day- Time when recorded
CSInfo_20091129-134035.txt

Unzip the PhantompatchTM6900HDSuper_ ###p.rar (7zip works with both: Rar & Zip)
Code:
www.7-zip.org
put these files on the USB Stick
• TM6900HDSuper_###-day-month-year.stb official firmware
• PhantompatchTM6900HDSuper_ ###p.stb patched firmware
• 2-ADDON_002p.stb
put the stick in the TM
Main Menu
System Settings
Factory Reset
Enter Pin 0 0 0 0 if you did not change this!
receiver reboots
English or preferred language
Quote:
2 - load official firmware
Main Menu
USB
Data Transfer
select the stick if you have the choice
in the file list select (move orange background on it with remote cursor keys) TM6900HDSuper_###-day-month-year.stb and press ok
receiver reboots

Main Menu
System Settings
Factory Reset
Enter Pin 0 0 0 0 if you did not change this!
receiver reboots
English or preferred language
Quote:
3 - load patched firmware 1st
Main Menu
USB
Data Transfer
select the stick if you have the choice
in the file list select (move orange background on it with remote cursor keys) PhantompatchTM6900HDSuper_ ###p.stb and press ok
The writing process happens several times reaching 100% let the box finish its writing and it will reboot. After the reboot:

Main Menu
System Settings
Factory Reset
Enter Pin 0 0 0 0 if you did not change this!
receiver reboots
English or preferred language
Quote:
4 - load add on 2nd
Main Menu
USB
Data Transfer
in the file list select 2-ADDON_002p.stb and press OK
wait until the box reboots.

Main Menu
System Settings
Factory Reset press OK
Enter Pin 0 0 0 0 if you did not change this!
Factory Reset
Saving Wait
Menu Language: English OK (or your choice)
Country: Europe OK (or your choice)
Main Menu exit on remote
Quote:
5 - reload channellist, softcam, CSInfo
No Channel:
Main Menu
USB
Data Transfer
If you get a choice [/USB1][/USB0] and left the USB stick on Technomate select [/USB0]
you should see the patches and the channellist, softcam & CSInfolist you saved:
20091129-134035.CNDF select it and press OK
Select DB to Save: Default DB ok
OK again
Select DB to Save: Normal DB ok
20091129-134035.key select it and press OK
CSInfo_20091129-134035.txt select it and press OK

take your paper notes and check the user settings

Last edited by Giga; 17-09-2010 at 02:10 PM. Reason: updated procedure

[fman]

Is anyone else having problems with this.
I have loaded everything as the post above and still cant clear Bulsat,
I have 70% signal quality and have had it working with previous patches.
Any help much appreciated

[jamesjay]

Is anyone else having problems with this.
I have loaded everything as the post above and still cant clear Bulsat,
I have 70% signal quality and have had it working with previous patches.
Any help much appreciated

If you are using a 6900 Super HD have you gone into the Main Menu and checked on System Information that the patch loaded, it should be new S/W Version 7.33p (Nov 18 2010).

Did you reload the Add On if you used it before, and the latest keybin/softcam...I used Glen_911TM softcam key for all 16.11.2010 - 2ND.Key.

Don't know if you have tried the above but I can open Bulsat OK with the above, also try a free to air channel just in case your setting have changed, it is always best to make a copy of your channel list before loading a patch like 733.

[holmroad]

Is anyone else having problems with this.
I have loaded everything as the post above and still cant clear Bulsat,
I have 70% signal quality and have had it working with previous patches.
Any help much appreciated

Should open fine as long as youve loaded patch plus Add-On plus latest sofcam - all in that order mate!:respect-050:

[fman]

Thanks lads,
Yes it is a 6900 super+hd combo, and yes the patch is showing as you describe in system information, and i have loaded the software in the proper order and am using the same key bin as you. never had a problem with bulsat before.
Maybe i'll try rescanning the channels and see if that helps.

[fman]

Nope didn't work, also tried downloading the key file again, still nothing.
any ideas?

[jamesjay]

Nope didn't work, also tried downloading the key file again, still nothing.
any ideas?

How about unplugging the box from the mains for 10mins or so...and/or reloading all the files again just in case the new patch didn't load properly.

It worked for me OK so I am just making suggestions, have you tried moving your dish to 19.2 to see if you can open the film 1.1 channel?

Also can you open a free to air channel on bulsat say The Voice 12524 H 30000

[fman]

I've just tried reloading everything again and still no go, and also won't open film 1.1 on 19.2.
and yes the voice works

[jocktrucker]

I have uploaded the new patch 733p, box confirms this. Can't find the Glen key (16/11/10) and, what is the add on to be reloaded.

Sorry for asking, last time I patched the box was in January, use diab cam just now.

[jocktrucker]

Got it. Just reloaded the patch and found the keys. Works fine.

:woohoo-022:

[jamesjay]

I've just tried reloading everything again and still no go, and also won't open film 1.1 on 19.2.

The only thing I can think of is, that there were 2 softcam files on the 16/11/10 are you sure you have the 2nd one, and are you downloading it to your PC then extracting it to your USB flash drive for uploading to your box.

Sorry if I am repeating what you have already tried but...but if you followed Giga's instructions and have 733p loaded then I am not sure what could have gone wrong!

It looks like the softcam isn't loading on your box.

[fman]

Yes it's definitely the 2nd key file, and yes i've extracted it to my flash drive.
Don't know where to go next, I have never had any problems with this before.
appreciate you trying to help.

[jamesjay]

Hi M8,

You may need to clean out your softcam files on your box...try extracting then loading the below file on to your box it cleans out all the old keys...you may have run out of space, and then put the new key file on after...this came from our friend Giga so is it reliable...it's the only thing I can think it could be.

Good luck

James.

https://www.satpimps.co.uk/attachment.php?attachmentid=37754&d=1254737856

[alboke]

Sorry for asking, last time I patched the box was in January, use diab cam just now

...try removing cam ...had same problem cam and softcam dont get on together

[holmroad]

Yes it's definitely the 2nd key file, and yes i've extracted it to my flash drive.
Don't know where to go next, I have never had any problems with this before.
appreciate you trying to help.

Good point above by albloke - have you still got your cam in the stb, because its a known fact that cams and softcams often have compatibility problems?
Maybe you could try it all without the diablo in at all?:respect-050:

[gentlmen]

Also once you pacthed and Add on, before put the latest keys you can try to put TMSoftcam Empty No Keys then you put the latest one after...

Regards...
Gen...

[holmroad]

See there's a new softcam posted by Echelon to open Bulsat, which should help alleviate any outstanding Bulsat queries:-


https://www.satpimps.co.uk/showthread.php?t=63673





Thanks Ech!!:respect-050:

[pricey]

Are the Dutch channels still open with 733? Keys have changed and 732 not opening them. just want to know if it's worthwhile before I change to this patch. Thanks.

[fman]

Update

Just loaded the softcam posted by Echelon, and hey presto, Bulsat open.
I tried all your suggestions previously, but to no avail, so must have been something to do with the key file.
Thanks for all your input guys
Fman

[holmroad]

Are the Dutch channels still open with 733? Keys have changed and 732 not opening them. just want to know if it's worthwhile before I change to this patch. Thanks.

Yes mate, patch 733P plus latest softcam opens Bulsat (39E) AND the C+ N/L channels (19E)!
Plus many others of course too!:respect-067:

[holmroad]

Just found there's a new softcam this morning, with new C+ N/L keys on it guys!:respect-067:

[martin007]

https://www.satpimps.co.uk/showthread.php?t=111145

[titus]

also just noticed that there are some channels (kable deutchland ones) on 23.5e that are open as well. (not sure if that has been said)

[Sathappy]

If you want to know where to find the patch 733p, just send me a PM here...

[Sathappy]

Yes mate, patch 733P plus latest softcam opens Bulsat (39E) AND the C+ N/L channels (19E)!
Plus many others of course too!:respect-067:


Which others on Astra & Hotbird ?

[satman10_0]

Which others on Astra & Hotbird ?

This question has already been answered and a link was provided by bozoth on page 2 # 37

https://www.satpimps.co.uk/showthread.php?t=143603&page=2

[satman10_0]

This is all EXACTLY what I was saying earlier in this thread guys - my TM6900HD Super totally froze after loading patch 733P - before I had chance to load the Add-On and softcam - my box usually reboots itself after both the USB patch load AND the Add-On phase - but NOT with patch 733P!
I also posted earlier how I had to switch my box off at the mains to reboot it - all of which has NEVER been necessary with previous patches!:respect-055:

Just want to to say that your noted observation with regards to the required manual reboot was helpful as it aliviated any panic..
During my update, the 733 Patch required a manual reboot, but the Add-on did re-boot automatically.

[holmroad]

Just want to to say that your noted observation with regards to the required manual reboot was helpful as it aliviated any panic..
During my update, the 733 Patch required a manual reboot, but the Add-on did re-boot automatically.

Cheers mate - we are all here to help each other, on this brilliant forum - and feedback is just as important for our mutual benefit!
Thanks for your feedback!:king-041:

[Learning]

film 1.1 1.3 dont open for me for some reason have I missed something?

[holmroad]

film 1.1 1.3 dont open for me for some reason have I missed something?

Its moved to 23.5E in Seca encryption mate!:respect-055:

[Learning]

Ta m8 the ba..........

[bamber]

I had been running my TM6800HD Super on 688p and using a Diablo 2, but I got fed up of Bulsat freezing for a few seconds every 15-20 minutes when the CAM was warm, so I decided to upgrade to the latest patch.

I have installed 733p, ADD_ON_002p and the latest softcam. Without the CAM in the receiver, TNT and C+NL work fine, but Bulsat freezes momentarily every few seconds. Does anyone know why that may be? Signal strength is 75%.

If I insert the Diablo 2 CAM, that seems to take over the decryption and the picture is stable for 15-20 minutes then freezes for a few seconds, as before.

[holmroad]

I had been running my TM6800HD Super on 688p and using a Diablo 2, but I got fed up of Bulsat freezing for a few seconds every 15-20 minutes when the CAM was warm, so I decided to upgrade to the latest patch.

I have installed 733p, ADD_ON_002p and the latest softcam. Without the CAM in the receiver, TNT and C+NL work fine, but Bulsat freezes momentarily every few seconds. Does anyone know why that may be? Signal strength is 75%.

If I insert the Diablo 2 CAM, that seems to take over the decryption and the picture is stable for 15-20 minutes then freezes for a few seconds, as before.

You are quite correct mate - I also get occasional glitches (picture breakup/ freezes) on Bulsat when using patch/softcam version, yet with G a m m a card I get absolutely NO glitches!
Odd eh?:king-042:

[DJ2004]

Hey Guys!

I´ve noticed something strange with the latest patch, maybe it has been impemented in previos patches as well but I didn´t notice it?
Well when I put an USB pendrive into the front USB port my technomate does automatically start recording in the background. This doesn´t work with my hdd.
Thus I can rewind anything I´m watching on TV but after a while a message appears that the memory is full.
Is it normal with this kind of recording?? Can it be turned off in a way?

Cheers,
DJ

[holmroad]

One thing I've noticed on 733P is that when viewing PVR recorded progs it no longer goes back to the start every time after stopping it!:respect-067:

[Tmull]

Is this patch good for both the 6900 and 6800 non super boxes? TMULL

[thijs]

Hey Guys!

I´ve noticed something strange with the latest patch, maybe it has been impemented in previos patches as well but I didn´t notice it?
Well when I put an USB pendrive into the front USB port my technomate does automatically start recording in the background. This doesn´t work with my hdd.
Thus I can rewind anything I´m watching on TV but after a while a message appears that the memory is full.
Is it normal with this kind of recording?? Can it be turned off in a way?

Cheers,
DJ

yes mate
go into your disk manager menu and turn auto time shift off

[holmroad]

Is this patch good for both the 6900 and 6800 non super boxes? TMULL

Think the answer is 'yes' mate, there IS one, but its patch 702P below!:respect-050:


https://www.satpimps.co.uk/showthread.php?p=769499#post76949 9