PDA

View Full Version : Icecrypt.stc6000hdpvr



ColdAsICE
19-01-2011, 12:07 PM
UK Terrestrial Freeview LCN(Local Channel Numbering) and full Freeview seven Day EPG now working.

ColdAsICE
18-02-2011, 12:44 PM
================================= ========
History Release Note
================================= ========

-----------------------------------------------------------------------
- v1.08.87 / 2011. 02. 18
-----------------------------------------------------------------------



1.Rumeli TV sync probleem : fixed
2.Not saving Config : fixed
3.Stopping symptoms after Divx file Play : fixed
4.in Usals menu, supporting to the third decimal place with Longitude and Latitude
5.Wi-Fi USB Devices added as following
> EDUP EP-MS150N, EP-MS150NW
> Airlink AWLL6075
> TRENDnet TEW-648UB, TEW-649UB, TEW-624UB rev C1
> Corega CG-WLUSB2GTST
> D-Link DWA-131 rev A1, rev C2, rev E1
> Belkin Components F5D8053
> Linksys wusb100n v1, v2
> linksys wusb600n v1, v2
> D-link dwa-140 B1,B2
6.NTFS file system support
HDD should be formatted once in PVR for proper working in both PVR and PC.
If it is formatted in PC, it can make a Failure/Error.

ColdAsICE
29-03-2011, 03:09 PM
Release Notes for FAC.ICECRYPT.STC6000HDPVR.v1.08.9 4

1. Showing WAIT OFF on front display during recording in standby mode : solved
2. Calculated time error in recording information : solved
. Spelling error as ¡®Power Saving in Standby Mode¡¯ in A/V output setting menu : amended
3. Double Blindscan or not running Blindscan: Fixed
4. Portuguese Language : added
5. French OSD language translation : amended
6. Dutch OSD language translation : amended

ColdAsICE
22-06-2011, 11:41 AM
Icecrypt STC6000HDPVR Ver 1.09.20 firmware requires Webzeal Ver 1.90.
Please upgrade you webzeal to Ver 1.90.


1. Multipicture mosaic funtion bug : Amended
2. 14:9 tv sapect ration support : Added
3. Blind Scan search wrong : Amended
4. Duplicated channel or other bugs in Blind scan : Solved
5. Sky portal CH problem : Solved
6. Hang-up when make 10 min pause during playback rec file : Solved
7. Satellite & TP Updating : Added
- NSS10 C-Band 37,5¡ÆW,
- Telstar 11N Ku-Band 37,6¡ÆW
8. EPG Daily Recording Bug : Solved
9. Working Screen saver during Radio service playback : Solved
10. Can not delete specific Rec file Bug(file name include / or special character) : Solved
11. YouTube: Forward & Reward : Added
12. Unstable Signal Quality : Solved
13. Background black issue in the info Banner's event name : Solved
14. Recording name saved as previous event name in event scheduled recording : Solved
15. EPG.txt file also saved in USB : Solved
16. 2hours before EPG DATA screened out once open the EPG DATA stored in HDD : Solved

MD5 checksum: D9B048FA150A9005C054DF7240FEF04A

ColdAsICE
13-07-2011, 05:45 PM
Ver 1.09.25

Common Issue

1. Edit Degree issue (presented incorrect degree Num) : Solved
2. Incorrect Teletext Bug : Solved
3. Teletext message sudden pops up on the screen : Solved
4. Black PIP screen in specific TP : Solved
5. Below WebZeal issues : Solved
a) mnt file set-up losing after re-boot
b) Mixed with WebZeal and TV mode when starting and exiting.
c) Overlaps Audio and OSD of TV mode
d) can not exit from the plugin menu

S3500 & STC6000 specific issues
1. Free TV+ : Added
2. MKV file Jump, Forward, Rewind function : Added
3. Click noise when changing channel : Improved
4. Page Up / Down Key malfunction : Solved
5. proxy server window in Network setting menu : Added


-- Icecrypt Firmware server now embedded --

ColdAsICE
12-08-2011, 02:02 PM
Ver 1.09.35

Icecrypt S3500, s4000 and STC6000 Common Issue

1. fdu & plugin files server upgrade (fdu only currently) : Supported
2. ST codec MP3 Player : Supported
3. Mosaic screen broken issue : Amended
4. Press recall key during booting display "Run..." mode : Deactivate plugin Auto Start


S 3500 & STC6000
1. Play YouTube video : Available
2. Persian TTX : Added


<Free TV+>
1. Free TV+ bugs : Amended
- Change You****'s parental control default : Amended (default is Lock)
- Download status bar disappearing when changing full screen : Amended
- Hang up intermittently when moving cursor in downloaded video list: Amended
- Initializing setting value after installing addon : Amended
- Setting Pop-up window broken : Amended
- Can not renewal the screen : Amended
- Showing the message box if Free TV+ is not access network : Added
- Disappearing the cursor in the movie list : Amended
- Hang up when changing the service SVT to Youtube : Amended
- Screen Resoultion : Supported
- Information for movie duration : Supported (if available)
- Showing up the message if there is any proper storage : Added
- Changing only full screen enlarged over the PIG during PIG movie play if press the V.FORMAT button : Amended
- Fashion TV added : Added
- Metacafe content : Available to add
- Hang up when choosing F parties category in Fashion TV service : Amended
- List up only 4 when choosing the specific category in YouTube service : Amended
- Hang up when changing specific category in Fashion TV
- letter is disappeared when user inputs the wrong PIN code : Amended
- Setting OSD boards are blinded with more than 7 server list : Amended
- PIG screen crushed with not complete download contents : Amended

2. Addon Version : Updated
- Working with only v1.01
- Addon should be installed newly and previous version will not be working

** Addon works with only compatible Free TV+ version. If incompatible version of addon is installed with Free TV+, it will not be updated on the addon list.

ColdAsICE
09-12-2011, 06:52 PM
For the Icecrypt STC6000
Firmware Ver 2.09.87

Please note that if your Icecrypt STC 6000 is using the Loader version 5.02 or 5.04 you will need to first load the bridge V1.99.99 firmware(attached) so that you can then upgrade to the new V2.09.87 firmware. The V2.09.87 firmware will upgrade the loader to version 6.00.

WARNING: This is a one way upgrade as there is no return path back to the earlier loader/firmware.
If you are using or thinking of using E2 images in your STC6000 think carefully before applying this upgrade as the Version 6 bootloader has no E2 version at present.

This new firmware contains the following additional features

1. New Short Cut menu
2. DLNA : Supported
3. Internet TV+ : Supported
4. Upgrade WebZeal
- BIP (Browser in Picture) : Added
** BIP : watch live channel and web surfing at one time in live screen.
(refer to the instruction)
5. USB T-Tuner : Supported (refer to the instruction)
- Only AF9015 chipset support
- Not working with T-tuner model.


[ WebZeal ]

1. BIP function : Added (Run webzeal in short cut menu)
(Changeable webzeal size pressing Red/Green key)
2. Smooth mouse scroll
3. scroll moving with remote
4. History search supporting
5. Favorite site add and edit
6. Zoom in / out supporting
7. Upgrade color (16bit to 32bit)
8. Inputting English Character first in Numeric Keyboard


Bugs cleared

1. Server Upgrade : Supported
- within 10 minute after booting, upgrade information box will be shown if there new s/w is available
2. Recording file can not be deleted in list : Solved
3. Recognizing all 16:9 ratio channel as HD channel : Solved
4. HD FAV channel list is including SD channel : Solved
5. Display incorrect resolution : Solved
6. Uninstallation of Plugin : Solved
7. Store EPG data in USB : Supported

ColdAsICE
17-04-2012, 04:31 PM
Firmware for the Icecrypt STC6000 model only.

This is the pre-release firmware with auto 7-day EPG for UK services on Astra 2 and another Major Italian broadcaster on Hotbird.
The EPG should auto update in the background if you have a twin satellite tuner model(both tuners need to be symmetrical(LNB set up the same for both).
Combo tuners (S/S2 and T/T2)will only update on the transponder being viewed.

ColdAsICE
04-07-2012, 03:35 PM
Firmware for the Icecrypt STC6000 model only.

Upgrades & Improvements :

--> Before Start update pls. stop PlugIns !

--> Hang up when formatting user data : Solved
--> Couldn't access root folder : Solved
--> Specific font missing in Free TV+ : Solved
--> Hang up when installing addon : Solved
--> Astra Channel service names bug : Solved
--> Hang up when copying data from HDD to USB : Sovled
--> User Font bu fix.
--> UTF-8 Support improved
--> Changing structure of OSD (right & left navigation): Adapted
--> Twitter shortcut removed, CNN shortcut added
--> Internet Radio+ & RSS News functions increased & improved :
--> Online server download : Supported
--> Total number of URL list : 100 -> 200 increased
--> Overlap checking for URL list
--> Deleting URL list separately
--> Deleting URL list All by hot key
--> Weather Forecast increased & improved
--> Playlist Path bug : Solved
--> After downloading FDU and Hangup : Solved
--> Plugin API update - Version API 1.13
--> New Software-Online-Update function added :
--> After downloading S/W, background download is available By pressing red button.
--> After downloading S/W, Available to choose upgrade type as Now / 30min later / 1 hour later

ColdAsICE
01-08-2012, 10:25 AM
Ver 2.10.78

[ Key Issue ]
Sync Player+ Supported : New Function.
** Sync player+ is conditionally adapted based on model.


[ Internet TV+ ]

1. URL sequence in Internet TV+ can be moved by user : Upgraded
2. Overwrite duplicated URL list in Internet TV+ : Upgraded
3. New URL list is located in first page : Upgraded
4. Deleting URL list All by hot key : Upgraded
5. Staying last FreeTV+ service after restarting : Added
6. Search by hot key in Free TV+ service addon : Upgraded
- Available in YouTube, Metacafe 1.05, Fashion TV 1.05


[ Other Common Issues ]

1. Staying last FreeTV+ service after restarting : Added
2. Can not sort folders in playlist and Network drive by yellow button : Solved




[ How to sync with your PC ]

- Receiver and PC should be connected in same local network.
(By checking your gateway information, you can learn it)

- Run Sync Player+ in your receiver.

- Sync Player+ will find your PC automatically in few seconds then, you will see PC list on your screen.

- After choosing your PC, you will see PIN code on your screen. Please input this code on your PC to pair both receiver and PC.

- Pairing is successful, you will see the success message on the right upper side of your screen.

< Note >
- If there are many PC¡¯s that you would like to share in your local network, you can make paired PC more and more at the same time.
- By pressing red button, you can stop pairing with specific PC.

2. How to USE

- You will see Movie / Music / Torrent category if the receiver and PC are paired successfully.

- Movie category shows you all movie list that could be played in receiver among downloaded contents via torrent from your PC.

- Music category shows you all music list that could be played in receiver among downloaded contents via torrent from your PC.

- Torrent category shows you all downloaded contents via torrent from your PC.
- The list you download on your PC should be kept in torrent program.
If this list is deleted, you can not see any list on your receiver.

ColdAsICE
08-10-2012, 03:54 PM
Firmware V2.11.01 for the Icecrypt STC6000 model

- Upgrades & Improvements :
--> Before Start update pls. stop PlugIns !
--> Slow Motion Function add. for Playback, Recording and Timeshift:
--> Press 2x Times PAUSE Button, press again for 3x speed
--> Install help function add. after factory settings by first install time
--> fixed “slow, freezing, and hang-up” matters
--> Conax Cardslot driver update
--> Tuner driver update
--> Power saving in Standby Mode changed :
--> Menu - Configuration - A/V Output Setting : Power saving in Standby removed
--> Power saving in Standby to Live TV Mode added :
--> Press Power Button on RCU (Popup Screen)
--> Power saving in Standby : YES (Deep Standby), NO (Normal Standby)
--> Auto Power off Function added
--> Menu - Configuration - Time Setting :
--> Auto Power off : Off, 30min ~ 180min
--> Format User Data Function added :
--> Menu - Installation - System Recovery :
--> Format USer Data (PW : 0000), installed Plugin`s & Addons will be delete !
--> OSD Menu Language German : Translation updated
--> New Function for Recall Button added
--> Red Button Delete All
--> Satellite & TP list updated
--> DVB Subtitle not showing bug fixed
--> Blind Scan hangup bug fixed
--> Special Characters (o a u) not display bug fixed
--> Diverse minor bugs fixed
--> Youtube fixed

IMPORTANT Advice before Software and Setting Update
Backup your existing Software & Setting files in MAIN Directory to your USB Stick !
Use the system store option to save your settings into a safe partition before Factory resetting.

Finally use the Factory Reset (in the System Recovery) to avoid latent memory errors.

ColdAsICE
25-10-2012, 02:45 PM
FAC.ICECRYPT STC6000.v2.11.11

Firmware upgrade for the Icecrypt model STC6000 Ver 2.11.11


1. System rebooting issues : Solved
- STB Hangup in changing EPG : Solved
- Slow motion in Screen : Solved
- STB hangup in channel changing : Solved
- Auto reboot : Solved
- Freeze with loader number on the Display : Solved
- Groundless STB hangup : Solved
- No Signal : Solved
- Weather Forecast : Solved

ColdAsICE
12-11-2012, 06:03 PM
Firmware version v2.11.16 for Icecrypt model STC6000

Remember to stop all PlugIns before you attempt to upgrade the firmware.
Store your system data to back up your channel and installation data.
Factory restore after upgrading the firmware and use the restore pre-stored position to restore your channel settings.

Release details

--> Standby function changes :
--> 1 x Power Button Normal Standby
--> 2 x Power Button Deep Standby
--> Auto Deep Standby disabled ! (removed)
--> Menu - Configuration - A/V Output Setting : Power Saving in Standby Mode : OFF : normal Standby, ON : Deep Standby
--> MHW EPG improved
--> Slomotion function improved (Start with << **** Button, Stop with Play Button)
--> Auto Power off improved during Recording :
--> After 1 Min . Auto Power off when finished recording
--> Overlap Timer-Recordings without Pause
--> Timer not working when freeTV is being used : Solved
--> Blindscan & Auto Search function improved
--> Auto Find function improved :
--> Service Search : Auto Find with RED Button
--> Upgraded Shortcut menu : Shortcut 2nd version.(New Icon and Style is adapted)
--> Internet Radio+ : Including more categories like Pop, Rock, R&B, Dance, etc.. :
--> INFO Button for add. more category
--> Weather Forecast not working : Solved
--> CI+ function improved
--> Audio Language fixed
--> Timeshift bug fixed
--> fixed “slow, freezing, and hang-up” matters
--> Many hangup points fixed

ColdAsICE
18-12-2012, 11:17 AM
Firmware version v2.11.30 for Icecrypt model STC6000

Remember to stop all PlugIns before you attempt to upgrade the firmware.
Store your system data to back up your channel and installation data.
Factory restore after upgrading the firmware and use the restore pre-stored position to restore your channel settings.

Release details

--> DLNA (DMS) Updated :
--> Supported file Format :
--> video: avi, divx, wmv, mp4(m4v), mkv, flv, mpg(mpeg), ts(m2ts), vob, mov, xvid
--> audio: mp3, m4a, wma, wav, ogg, flac, aac, ac3
--> image: jpg
--> Uncertificated file Format :
--> video : mts, m2t, 3gp, asf
--> audio : asf, fla, flc, m4p, pcm

--> FTA Channel recording in CI+ SW : Updated :
----> Not Encrypt Record (available to PC play)
----> No Retention Limit
--> Unification of menu item name in different language : Changed :
----> Applications -> Plugin
--> Weather Forecast City list : Updated
--> Password visible to be hidden in facebook login : Adapted
--> Can not access to NAS equipment via DLNA : Solved
--> Dolby Digital + is not working in Timeshift : Solved
--> Recording file play failure in DLNA : Solved
--> Auto power off function : Newly Added
--> When move recording file with same event name to folder STB, it is overwritted : Solved
--> Auto Power option : Added
--> Error message when recoding Digiturk channels with CI+ CAM : Solved
--> STB hangup with using EPG : Solved
--> Recording file can not playback on PC : Solved
--> Recording file is freezed when playback on PC : Sovled
--> Timer not working when FreeTV used : Solved
--> STB hangup from wake up : Solved
--> Boxer CI+ CAM shoule be working in non CI+ channel with normal SW : Solved (CI+ Boxer Viaccess DTT)
--> Can not search T2 HD channel and No signal : Solved
--> Deleting Tick mark when downloading plugin : Adapted
--> Not woring well in ORF3 channel : Solved
--> STB slow when choosing specific frequency : Solved

--> Kartina TV feedback : Updated :
----> Change OSD language to Russian for VOD Search
----> Speeding up channel switching
----> There is no mode (ECO - low bit-rate ), therefore possible freezes with slow connection speed.
----> There is no FF/ REW in VOD part
----> Archive with 3 days size is small, usually customers want watch programs within whole past week.
----> During long playback files from VOD possible picture freezes
----> There is no PIN protection for Adult channels.

--> RSS freezing : Solved
--> Descrable or popup message when changing the channel with recording a channel using CAM : Solved
--> Error message with Digituk CI+ CAM : Solved
--> Networking is blocked when connecting with router (DNS issue) : Solved
--> Hidden URL in Internet TV channel : Solved
--> STB hangup when watching internet TV : Solved
--> STB hangup when timeshifting works : Solved
--> Can not start scheduled recoridng in Tuner 2 : Solved
--> STB sudden hangup when wathching a channel : Solved
--> Cable search problem : Solved


Change the default menu as Icon menu : Adapted

ColdAsICE
16-01-2013, 03:28 PM
FAC.ICECRYPT.STC6000HDPVR.v2.11.3 4
Firmware version v2.11.34 for Icecrypt model STC6000

Remember to stop all PlugIns before you attempt to upgrade the firmware.
Store your system data to back up your channel and installation data.
Factory restore after upgrading the firmware and use the restore pre-stored position to restore your channel settings.

Release details

[ Key Issue ]

1. YouTube not working : Solved

[ Updated Issue ]

1. DVB-Subtitling is missing or broken in recorded file : Fixed
2. Network Server address missing : Solved

ColdAsICE
16-05-2013, 03:39 PM
FAC.ICECRYPT.STC6000HDPVR.v2.11.5 3
Firmware version v2.11.53 for Icecrypt model STC6000

Remember to stop all PlugIns before you attempt to upgrade the firmware.
Store your system data to back up your channel and installation data.
Factory restore after upgrading the firmware and use the restore pre-stored position to restore your channel settings.

Main improvements are UK Freeview T2 HD 7 day EPG now corrected.

Release details


1. Remaining time shown in playlist menu after watching movie file : Newly Added
2. PIN code request when format user date is selected : Newly Added
3. Pause function in Internet TV+ : Newly Added
4. Recording Icon displayed on left top screen in recording channel : Newly Added
5. Auto Resolution - revised optimisation of the video resolution when channel zapping(when auto is selected in AV menu).
6. Unable to delete recorded files that have been recorded with corrupted titles: Solved
7. UK DVB-T2 7 day EPG fully functioning.