RTi core RC6 Enigma 2

[hfmls]

RTi core RC6 Enigma 2

RTi core RC6 Enigma 2 Image :

Based on completly new Drivers and new Kernel.

This Enigma 2 Image is for DOM Install !!!

USE AzUP 2.1 to Install this Image in Your device ( Download AzUP 2.1 )

What is new :

- All drivers are rewriten and placed in Kernel space !!!

- Completly new kernel ( from 2.6.22-19 upgraded to 2.6.29 )

- New DVB-S2 Tuner driver for Elite - Premium - Premium+ and Ultra

- DVB-T and DVB-C for all models comming very soon.

- Twin tuner support for Premium+ comming very soon.

- Completly new Gstreamer build by sattomy ( Support for seeking added and Improved stability and playback )

- New and enhanced Videomode ( A/V Settings ) by telesat ( Added settings for DTS and AC3 )

- Deinterlace ( 1, 2, 3 - 1 and 2 give so far best result on our tests )

- Digital Audio settings ( Inside of A/V Settings )

- MediaCenter Plugin by sattomy

- Fixed problem for HD channels on 23.5 , 13 E, 0.8 and 30 w

- Improved Video quality

- Better STC compensation ( Switching to / from AC3 or DTS fixed )

Small Info :

- Now You are also able to play WMA files , only thing what You have to do is to rename WMA extension to WAV , as Enigma 2 doesnt recognise WMA extension ( However, we will patch soon Enigma 2 to be able to recognise .wma extension ).

Still You can expect some bugs which will be improved after implementation of DVB-T, DVB-C, ISDB-T and Twin Tuner support ( Premium+ )

We would like to ask all of You to make Feedback as much as possible





Download :

http://www.multiupload.com/PMZQPNX1QC

Thanks to RTi Team

[Dig Deep]

Well done, great teamwork !

[optex]

Thanks from Athens ........

[crawley]

This just gets better and better.Thanks to all the team! :)

[kerrywez]

Thanks just downloading the image now, Just hope the long awaited DVB-T support comes soon, but things are moving along great as it is so I am not complaining.

Best regards Wez

[tx0]

picture is squeezed vertically, and nothing I can do about it. all that settings "show 16:9 content as ..." are not working.

[Juka]

Added scaling modes:

0 -> SCALINGMODE_NORMAL
1 -> SCALINGMODE_PANSCAN
2 -> SCALINGMODE_LETTERBOX
3 -> SCALINGMODE_PILLARBOX
4 -> SCALINGMODE_VERTICALCENTER

To activate some of them go to telnet ,

echo "0" > /proc/scalingmode
to activate for example NORMAL scalingmode.

Added setting aspect ratio,
To set any aspect ratio for current video,

echo "4 3" > /proc/aspectration
This will set video aspect ratio to 4:3.


Replace old modules with new ones.

PS. For now you must manual set this values if you want, till "telesat" doesnt set somewhere in plugins or code new plugin, or some of you guys maybe can code new plugin for this settings, it's up to you ...

Download:

http://www.sendspace.com/file/m2bqr9

[hfmls]

@New drivers
Added Volume Up/Down + Mute/Unmute

Pls replace old KO modules with new ones, /lib/modules/linux-2.6.29....../extra/
Code:

http://www.sendspace.com/file/gzcblm

[hfmls]

echo "16 9" > /proc/aspectratio
and
echo "0" > /proc/scalingmode

working perfect!

[tx0]

Im so f***ng tired of that. 27 programs to move from one version to another, firmware is just out and already have 2 updates. for God sake will someone make these updates automatically via internet?

[hfmls]

nobody forces you to use it.

[tx0]

also... sound on SD channels is much louder than on HD
+ EPG is not working.

[tx0]

local card is not working too. there is no such module to support cardreader with this "new" kernel


lsmod
Not tainted
smp8634dvb 574736 21 - Live 0xc9517000 (P)
smp8634_NIM 31200 1 smp8634dvb, Live 0xc9483000 (P)
smp8634_DVBS2 307456 2 smp8634dvb,smp8634_NIM, Live 0xc9425000 (P)
smp8634_ISDBT 58704 1 smp8634_NIM, Live 0xc939e000 (P)
smp8634_DVBC 55008 1 smp8634_NIM, Live 0xc9365000 (P)
smp8634_DVBT 26224 1 smp8634_NIM, Live 0xc9337000 (P)
smp8634_i2chaltc 7120 1 smp8634_ISDBT, Live 0xc9323000 (P)
smp8634_i2chal 8848 6 smp8634dvb,smp8634_NIM,smp8634_DV BS2,smp8634_ISDBT,smp8634_DVBC,sm p8634_DVBT, Live 0xc9319000 (P)
smp8634_i2chw 12208 6 smp8634dvb,smp8634_NIM,smp8634_DV BS2,smp8634_ISDBT,smp8634_DVBC,sm p8634_DVBT, Live 0xc930e000 (P)
smp8634_ruahdmi 70480 1 smp8634dvb, Live 0xc92f3000 (P)
smp8634_rmcec 44480 1 smp8634_ruahdmi, Live 0xc92c7000 (P)
smp8634_rmedid 38112 3 smp8634dvb,smp8634_ruahdmi,smp863 4_rmcec, Live 0xc92a6000 (P)
smp8634_rmhdmi 245584 3 smp8634dvb,smp8634_ruahdmi,smp863 4_rmcec, Live 0xc9251000 (P)
smp8634_rmsha1 10448 1 smp8634_rmhdmi, Live 0xc91ee000 (P)
smp8634_rmi2c 2592 2 smp8634_ruahdmi,smp8634_rmhdmi, Live 0xc91e5000 (P)
smp8634_ruai2c 4736 1 smp8634_ruahdmi, Live 0xc91dd000 (P)
smp8634_dcc 1294752 10 smp8634dvb,smp8634_i2chaltc,smp86 34_i2chal,smp8634_i2chw,smp8634_r uahdmi,smp8634_rmcec,smp8634_rmed id,smp8634_rmhdmi,smp8634_rmsha1, smp8634_ruai2c, Live 0xc909a000 (P)
smp8634_rmcw 11200 4 smp8634dvb,smp8634_ruahdmi,smp863 4_rmcec,smp8634_dcc, Live 0xc903c000 (P)
usbserial 34800 0 - Live 0xc901f000
cifs 322096 0 - Live 0xc8fbb000
em8xxx 2521472 2 smp8634dvb,smp8634_dcc, Live 0xc8cb6000 (P)
scsi_wait_scan 1008 0 - Live 0xc8a35000
llad 116128 6 smp8634dvb,smp8634_i2chaltc,smp86 34_i2chal,smp8634_i2chw,smp8634_d cc,em8xxx, Live 0xc8a13000 (P)
irvfd 14624 2 smp8634dvb,smp8634_NIM, Live 0xc89f8000 (P)
rpcsec_gss_krb5 11440 0 - Live 0xc89ea000
rt61 344496 1 - Live 0xc8982000 (P)

[naveh]

-sh: can't create /proc/scalingmode : nonexistent directory

where did I go wrong

[naveh]

picture still on when on standby.

[kinace]

also... sound on SD channels is much louder than on HD
+ EPG is not working.

rytec xml epg works for me after reboot

[kasukabe]

Tested new RC6.
Scan of 19.2E and 23.5E was working fine (DiSEqC 1.2)

On Factory Reset, it's hanging on VideoW i z a r d.
Video is going dark periodically.
Cog of Wheel appear, can't select anything on "Video Input Selection" Menu.
Can't continue testing for now :(

[tx0]

I can confirm that. (hanging while selecting video mode)

[kasukabe]

How I can delete channel lists manually?

[amyren]

-sh: can't create /proc/scalingmode : nonexistent directory

where did I go wrong

You probably havent copied the files from the update 2. I think they are attached in post by juka here. After copying those files you need to restart, then you will be able to change scaling mode.

Also there are some script files I did post in the official RTi forum som that you dont have to use telnet for this.
h**p://www.azbox-enigma.eu/RTi/forum/showthread.php?t=295

[amyren]

How I can delete channel lists manually?

The easiest way to manage your channel list are with DreamBoxEdit (PC program)

But you should be able to delete whatever you want by using the menu button while you are browsing your channel lists.

[triplexxx]

in this path need to remove patch.e2 to only patch because canot send imege to elite i haw RC4 image