Reading Tivusat card?

[Zeke]

Okay after getting past the passwd bit things have been moving along :smash:

How do I get a Tivusat card to read?

I've got a PDF tutorial but it requires running Oscam. But if I run Oscam then I can't run CCcam? Not to mention I haven't figured out where the Oscam cfg file is hidden :ack2:

[passete]

Oscam conf files, are usualy on var/etc/tuxbox/config !
Maybe you need to install a version of ccam/oscam for your image!

Here an exemple to read tvsat card with oscam, file is oscam.server :

## overclock doesn't work with this card
#[reader]
#enable = 1
#label = tvsat_slot
#protocol = internal
#device = /dev/sci0
#cardmhz = 368
#mhz = 368
#group = 1
#caid = 183d
#emmcache = 1,2,2
#blockemm-g = 1
#tiger_rsakey = A92DA72FEEACF2947B003ED652153B189 E4043B0138C368BDF6B9ED77DDAD6C076 1A2198AEB3FC97A19C9D01CA769B3FFFE 4F6E70FA4E0696A8980E18D8C58E11D81 7121346E3E66457FDD84CFA72589B25B5 38EFC304361B54845F39E9EFA52D805E5 FD86B595B366C35716ABC91FA3DC159C9 F4D8164B5

[Anrakh]

You don't need CCcam if you run Oscam. It does all that CCcam does except read keys if you have dvbapi enabled.
The config files go in /etc/tuxbox/config
The main file names are oscam.server, oscam.conf, and oscam.user

Oscam won't start without a config.

[Zeke]

Turns out the config is in place and supports the card. But it doesn't seem to work -(

So I can't use keys with CCcam?

[Anrakh]

You can read keys with Oscam+CCcam, but not with Oscam alone.

[Zeke]

I wonder if the card just needs to update. It hasn't been used in a few weeks. It's now showing internal decode for some RAI channels but not working at all for the others.

[passete]

i think that the card need a update every week !
Oscam can update it, just need to set well the 3 files : oscam.server/user/conf

Take a look on oscam log, it will say if card needs update

[Zeke]

The card is found but I'm still stuck. Anything obvious from the log?

Thanks

13/04/2011 9:48:33 2AAC6C20 s version=1.00-unstable_svn, build #4462, system=mips-tuxbox-linux, nice=-1
13/04/2011 9:48:33 2AAC6C20 s client max. idle=120 sec, debug level=0
13/04/2011 9:48:33 2AAC6C20 s max. logsize=2000 Kb
13/04/2011 9:48:33 2AAC6C20 s client timeout=30000 ms, fallback timeout=2500 ms, cache delay=120 ms
13/04/2011 9:48:33 2AAC6C20 s auth size=4976
13/04/2011 9:48:33 2AAC6C20 s services reloaded: 0 services freed, 24 services loaded
13/04/2011 9:48:33 2AAC6C20 s userdb reloaded: 5 accounts loaded, 0 expired, 0 disabled
13/04/2011 9:48:33 2AAC6C20 s signal handling initialized (type=sysv)
13/04/2011 9:48:33 2AAC6C20 s 457 service-id's loaded
13/04/2011 9:48:33 2AAC6C20 s 50 tier-id's loaded
13/04/2011 9:48:33 2AAC6C20 s 966 provid's loaded
13/04/2011 9:48:33 2AAC6C20 s 22 lengths for caid guessing loaded
13/04/2011 9:48:33 2AAC6C20 s monitor: disabled
13/04/2011 9:48:33 2AAC6C20 s camd33: disabled
13/04/2011 9:48:33 2AAC6C20 s camd35: disabled
13/04/2011 9:48:33 2AAC6C20 s cs378x: disabled
13/04/2011 9:48:33 2AAC6C20 s newcamd: disabled
13/04/2011 9:48:33 2AAC6C20 s cccam: initialized (fd=8, port=4000, crypted)
13/04/2011 9:48:33 2AAC6C20 s radegast: disabled
13/04/2011 9:48:33 2AAC6C20 s http thread started
13/04/2011 9:48:33 2AAC6C20 s creating thread for device /dev/sci0
13/04/2011 9:48:33 2AAC6C20 s loadbalancer: can't read from file /tmp/.oscam/stat
13/04/2011 9:48:33 2AAC6C20 s anti cascading disabled
13/04/2011 9:48:33 2B6334B0 h HTTP Server listening on port 8888
13/04/2011 9:48:33 2BA334B0 r reader thread started (thread=2BA334B0, label=tivusat, device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
13/04/2011 9:48:33 2BE334B0 c plain dvbapi-client granted (user1, au=auto)
13/04/2011 9:48:33 2BE334B0 c dvbapi: 2 entries read from oscam.dvbapi
13/04/2011 9:48:33 2BA334B0 r tivusat card detected
13/04/2011 9:48:37 2BA334B0 r ERROR in IO_Serial_Read errno=0
13/04/2011 9:48:37 2BE334B0 c dvbapi: new program number: 3912 (0000:3912 unknown)
13/04/2011 9:48:37 2BA334B0 r ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45 52 30 30 33 20 52 65 76 32 35 30 64
13/04/2011 9:48:38 2BA334B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
13/04/2011 9:48:39 2BA334B0 r detect nagra tiger card
13/04/2011 9:48:40 2BA334B0 r card system not supported
13/04/2011 9:48:40 2BA334B0 r Normal mode failed, reverting to Deprecated Mode
13/04/2011 9:48:43 2BA334B0 r ERROR in IO_Serial_Read errno=22
13/04/2011 9:48:43 2BA334B0 r ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45 52 30 30 33 20 52 65 76 32 35 30 64
13/04/2011 9:48:44 2BA334B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
13/04/2011 9:48:45 2BA334B0 r detect nagra tiger card
13/04/2011 9:48:48 2BA334B0 r ERROR in IO_Serial_Read errno=22
13/04/2011 9:48:51 2BA334B0 r ERROR in IO_Serial_Read errno=22
13/04/2011 9:48:54 2BA334B0 r ERROR in IO_Serial_Read errno=22
13/04/2011 9:48:57 2BA334B0 r ERROR in IO_Serial_Read errno=22
13/04/2011 9:48:57 2BA334B0 r card system not supported
13/04/2011 9:48:57 2BA334B0 r card initializing error
13/04/2011 9:49:37 2BE334B0 c dvbapi: [ADD PID 0] CAID: 0100 ECM_PID: 06A7 PROVID: 000030
13/04/2011 9:49:37 2BE334B0 c dvbapi: [ADD PID 1] CAID: 0100 ECM_PID: 0FDF PROVID: 000030
13/04/2011 9:49:37 2BE334B0 c dvbapi: [ADD PID 2] CAID: 183D ECM_PID: 1043 PROVID: 000000
13/04/2011 9:49:37 2BE334B0 c dvbapi: new program number: 213F (0100:213F unknown)
13/04/2011 9:49:37 2BE334B0 c dvbapi: Start descrambling PID #2 (CAID: 183D) 1
13/04/2011 9:49:37 2BE334B0 c user1 (183D&000000/213F/8C:BA75): not found (1 ms) (of 1 avail 1)
13/04/2011 9:49:40 2BE334B0 c user1 (183D&000000/213F/8C:756B): not found (0 ms) (of 1 avail 1)

[storm2]

Tivusat card run alone and update in CCcam 2.2.1.

Regards.

[passete]

13/04/2011 9:48:37 2BA334B0 r ERROR in IO_Serial_Read errno=0


Something is wrong, maybe you oscam.server settings.

[Zeke]

The server settings seem fine.

#eventuale/i reader remoto/i

#tivusat slot superiore chip verso il basso
[reader]
enable = 1
label = tivusat
protocol = internal
Device = /dev/sci0
Group = 1
caid = 183d
emmcache = 1,1,2
ecmcache = 1
cardmhz = 368
mhz = 368
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
tiger_rsakey = A92DA72FEEACF2947B003ED652153B189 E4043B0138C368BDF6B9ED77DDAD6C076 1A2198AEB3FC97A19C9D01CA769B3FFFE 4F6E70FA4E0696A8980E18D8C58E11D81 7121346E3E66457FDD84CFA72589B25B5 38EFC304361B54845F39E9EFA52D805E5 FD86B595B366C35716ABC91FA3DC159C9 F4D8164B5

[Zeke]

Tivusat card run alone and update in CCcam 2.2.1.

Regards.

Are you saying I don't need to run Oscam?

[passete]

Maybe not important, but add
detect = cd
and reboot oscam

[simond]

Tivusat card run alone and update in CCcam 2.2.1.

Regards.

ok tks , but can you pls tell us how to update in cccam 2.2.1
(do you have any special settings, in your cccam.cfg file )
it reads card 100 % sure , but i have to update,
in tvsat humax original box once a week .
rgs
have a nice day

[Zeke]

Maybe not important, but add
detect = cd
and reboot oscam

I just flashed a different image with Scam 3.59 instead of CCcam and everything seems to be working fine :respect-055:

[storm2]

Are you saying I don't need to run Oscam?

Yes, you don´t need oscam, no special config needed, just put the card in slot, select a tivu channel and the update is done in few seconds.

Regards.

[simond]

Yes, you don´t need oscam, no special config needed, just put the card in slot, select a tivu channel and the update is done in few seconds.

Regards.
but pls can you kindly post cccam.cfg autoupdate settings ...
i have version 2.2.1 in my dream7020 but does not update ...........
my setting are : below .....
DEBUG : yes
NEWCAMD CONF : no
DISABLE EMM : yes
EXTRA EMM LEVEL : yes
#SOFTKEY FILE : /var/keys/SoftCam.Key
#AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
CAID PRIO FILE : /var/etc/CCcam.prio
CAID IGNORE FILE : /var/keys/CCcam.ignore
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
LOG WARNINGS : /tmp/warnings.txt
NEWCAMD STEALT : 1
B: /dev/sci0 00
B: /dev/sci1 00
rgs

[storm2]

DISABLE EMM : yes


Why you disable EMMS?

# disable all local EMM readers
# saves lots of CPU, but you won't get any updates anymore
# (unless you get updates from your clients)
#
# default: no
#
DISABLE EMM : yes

Tonight when i come back to home i'll post my config.

Regards.

[simond]

Why you disable EMMS?

# disable all local EMM readers
# saves lots of CPU, but you won't get any updates anymore
# (unless you get updates from your clients)
#
# default: no
#
DISABLE EMM : yes

Tonight when i come back to home i'll post my config.

Regards.

tks ,my friend well done 4 quick reply .....
but the reason why i ,DISABLE EMM : yes ,
is because i have in my dremabox 7020s , jsc local sports
It works well on sharing, but when i use it localy for about -15 minutes, picture freezes and cccam crashes...
so i have 2 reboot )
rgs

[storm2]

but the reason why i ,DISABLE EMM : yes ,
is because i have in my dremabox 7020s , jsc local sports
It works well on sharing, but when i use it localy for about -15 minutes, picture freezes and cccam crashes...
so i have 2 reboot )
rgs

That's very stange, try this:
B: /dev/sci0 07 #block's all for card on sci0

Here is my config:
SHOW TIMING : yes
MINI OSD : yes
DEBUG : yes
#DISABLE EMM : yes
EXTRA EMM LEVEL : yes
#EMM THREADS : 1
#SOFTKEY FILE : /usr/keys/Softcam.Key
#AUTOROLL FILE : /usr/keys/AutoRoll.Key
#STATIC CW FILE : /usr/keys/constant.cw
CAID PRIO FILE : /etc/CCcam.prio
PROVIDERINFO FILE : /etc/CCcam.providers
CHANNELINFO FILE : /etc/CCcam.channelinfo
SMARTCARD CLOCK FREQUENCY: /dev/sci0 3570000

Regards.

[simond]

That's very stange, try this:
B: /dev/sci0 07 #block's all for card on sci0

Here is my config:
SHOW TIMING : yes
MINI OSD : yes
DEBUG : yes
#DISABLE EMM : yes
EXTRA EMM LEVEL : yes
#EMM THREADS : 1
#SOFTKEY FILE : /usr/keys/Softcam.Key
#AUTOROLL FILE : /usr/keys/AutoRoll.Key
#STATIC CW FILE : /usr/keys/constant.cw
CAID PRIO FILE : /etc/CCcam.prio
PROVIDERINFO FILE : /etc/CCcam.providers
CHANNELINFO FILE : /etc/CCcam.channelinfo
SMARTCARD CLOCK FREQUENCY: /dev/sci0 3570000

Regards.

good morning ....
so, all i have to do is :
extra emm level : yes , and it will autoupdate every week
&
SMARTCARD CLOCK FREQUENCY: /dev/sci0 3570000
i use nabilo darkstar 2 image in my dream box 7020s...
do you agree my friend
rgs
have a nice day

[storm2]

SMARTCARD CLOCK FREQUENCY: /dev/sci0 3570000


Only if your tivu card is in lower slot, if the card is in upper slot you have to change to sci1, same for the blocker.

Nabilo darkstar is a great image.

Good luck with tests.

Regards.