RTi Core v1.0

[Blagi]

What is new ?

- Card Reader OK

- New MediaCenter OK ( Menu -> Media Center, choose My Videos and wait 10-15 seconds to re-initialize HDMI!!!, for subtitles *.SRT press red button or SUB-T on RCU, they need to be named same as movie )

- Audio BUG Fixed

- A lot of other bugs fixed and so on.

- Time for zap - reduced

- VOL +/- Fixed

- MUTE(when change ch.) - Fixed

- Lost data when power off/on - Fixed

- Problem with relaod ch.list - Fixed

- Problem with external messages - Fixed

- New/rewritten WebIf

- NEW driver for RemoteControl - work like a charm

- New way for go to rescue mode - press and hold VOL+ button (from front panel or RemoteControl) during AZBox booting

- Removed DOM to be listed as HDD in Enigma2 Info, and now DOM is excluded from standby so COGs will show less.

In Media Center we know that Seeking is not working and VOL UP and DOWN, so please do not report this as BUG, it will be fixed in next release!

Link will apparently be available soon... They are working on it...

[hfmls]

http://www.filesonic.com/file/1088996561/RTi_Core_1.0.rar

[MickeySa]

Valid link is :

http://www.filesonic.com/file/1088996561/RTi_Core_1.0.rar

And please USE JUST THIS LINK, as we noticed also FAKE E2 for AzBox HD.

[Hectore]

Hello;

RTI V1.0 can be installed with Jazup 2.2.
That's work... :respect-048:

Regards.
Hectore

[beamobhoy]

Lads, this download site is p#ssing me off, nearly one hour so far and everytime i get to 0 seconds to download, it goes back to 13 mins. Can someone please upload this file to this thread??

Thanks

[SatSearcher]

A different link would be nice, Filesonic is great if you have an account, but it's almost impossible to d/l from as a free user, just keep getting told i can only d/l 1 file at a time, even though i'm not downloading anything!

[beamobhoy]

Just found this and it works!!

http://www.megaupload.com/?d=HC1AREHO

[valerica]

Here's another downl. link :


http://www.easy-share.com/1915756064/RTi_Core_1.0.rar


Cheers ,
Val .

[naveh]

another mirror:
http://www.megaupload.com/?d=S63ELOZU

[tx0]

S*y card is not working with this cardreader driver

2011/05/30 16:05:06 2156 r02 card detected
2011/05/30 16:05:12 2156 r02 ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
2011/05/30 16:05:13 2156 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/05/30 16:05:14 2156 r02 [videoguard2-reader] in videoguard2_card_init
2011/05/30 16:05:14 2156 r02 [videoguard2-reader] type: VideoGuard BSkyB (0963), baseyear: 1997
2011/05/30 16:05:15 2156 r02 card system not supported
2011/05/30 16:05:15 2156 r02 Normal mode failed, reverting to Deprecated Mode
2011/05/30 16:05:18 2156 r02 ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
2011/05/30 16:05:19 2156 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/05/30 16:05:20 2156 r02 [videoguard2-reader] in videoguard2_card_init
2011/05/30 16:05:20 2156 r02 [videoguard2-reader] type: VideoGuard BSkyB (0963), baseyear: 1997
2011/05/30 16:05:22 2156 r02 card system not supported
2011/05/30 16:05:22 2156 r02 card initializing error

[simon30000]

same error here as tx0 i tested 2 emu osc#m initializing error.. also ccc#m card init fail ..uk card..

[Vasco]

Hello;

RTI V1.0 can be installed with Jazup 2.2.
That's work... :respect-048:

Regards.
Hectore

Hello Hectore,

I could install this version with Jazup 2.2. with success.
Now I would like to go back to official FW.s
I tried but without success.
Is it possible with Jazup 2.2 ?

Thanks by advance

[iwols]

hi guys long time since i had my azbox switched on is this the rc13 that people are talking about and is it any better than the original fw

[the illuminati]

guys i have a problem ...
every time i reboot i go back to factory settings . have to re configure everything al over again . it is getting on my nerves.
also another thing i have 2 configs for sats as i have a 180cm motorized dish and a fixed 60cm dish on a fixed pos. lnb 1 is diseq 1.2 and lnb 2 is diseq 1.0 port ab everything was working ok on RC4 on this one no joy .when i swich between them i loose signal have to reboot but the i loose everthing .have to reconfigre everything
going back to RC4

[valerie]

Hello;

RTI V1.0 can be installed with Jazup 2.2.
That's work... :respect-048:

Regards.
Hectore

With jazup 2.2
is beter,i mean for format with azup 2.0.7 he dont do format
thanks a lot

[ZorroZZ]

simply put...a very very nice release...great job guys :respect-014: :respect-014: :respect-014:

[007.4]

Volume slider not working for me. Silent in some parts and VERY LOUD at the mid-point.

Also
ipkg install *ipk
gives major error messages including "segmentation fault" .

However, package does get installed!

[Hectore]

Hello Hectore,

I could install this version with Jazup 2.2. with success.
Now I would like to go back to official FW.s
I tried but without success.
Is it possible with Jazup 2.2 ?

Thanks by advance

Hello,

Yes, you put your azbox in rescue mode.
You put a orignal firmware on your usb stick pluged in your azbox
After you flash the original kernel with jazup2.2.

Regards.

[andy2005]

Installed the RC1 --> Nice image. However, I am not yet able to connect wifi to the router with WPA2.

Anybody experiences the same issue ?
:117:

[png]

When I try to install RC1 I get this message (you have old kennel in your Azbox!!you must install new kernel first!!) can anyone explaine what this means please and how to solve thanks

[radodroma]

use jazup by hectore, works like a charm...

[png]

use jazup by hectore, works like a charm...

cannot get jazup to work on my system useing win.7 64bit

[Blagi]

I can. So can you. It's not a problem. What are you doing - exactly?

[Blagi]

guys i have a problem ...
every time i reboot i go back to factory settings . have to re configure everything al over again . it is getting on my nerves.
also another thing i have 2 configs for sats as i have a 180cm motorized dish and a fixed 60cm dish on a fixed pos. lnb 1 is diseq 1.2 and lnb 2 is diseq 1.0 port ab everything was working ok on RC4 on this one no joy .when i swich between them i loose signal have to reboot but the i loose everthing .have to reconfigre everything
going back to RC4

Join the club. I went back to OFW. But there is good movement this time. A good beta version, I think. If they sort out the bugs - nice...

Hectore, telesat claims that JAZUp 2.2 doesn't work, that it throws mistakes. Is he correct in saying that? The format hasn't changes since the last time, I think.

Let's all keep on hoping... ;)

[crkcrk]

The problem with play MKV movie. Film block once after 10 mins sometimes after 20 that you are currently working on the film (The.Rite.2011.1080p.BluRay.X264-AMIABLE.mkv) but also in other films behave similarly. The same thing happens to me on official firmware a film currently on V1.0 is an internal 80GB hard disc and has a 7.65 GB As far as other works v1.0 works great for me.
If someone has a quality solution please help.

Azbox Premium 80GB internal hard disc

Excellent job RTI

[Hectore]

cannot get jazup to work on my system useing win.7 64bit

That's funny, i develop and test JaZUp! with Windows Seven 64Bit and i test it also with Linux 64bit platform.
Do you install 64bit JVM on your pc ?

Jazup is wrote in java, this language is multiplatform... Windows/linux 32 and 64 bit and Mac.

Regards.

[Hectore]

Hectore, telesat claims that JAZUp 2.2 doesn't work, that it throws mistakes. Is he correct in saying that? The format hasn't changes since the last time, I think.


Telesat is jealous of success and stability of Jazup, that's all...
When you install with azup v2.07, your dom is at 88% of use.
When you install with Jazup 2.2, your dom is at 17% of use !

Search the mistake...

Regards.

[zeini]

I sent my Box in rescuemode with Jazup 2.2. After the box has shown only booting on VFD. But it was in rescuemode. I was able to update it without problems with Jazup, even the box shows booting.

[Blagi]

Hectore, I've seen on other forums people report usage of 80%, yes...

However, isn't 51.6MB more than 17% of 256MB of RAM that AZ has?

Thanx for your work!

[Hectore]

Hectore, I've seen on other forums people report usage of 80%, yes...

However, isn't 51.6MB more than 17% of 256MB of RAM that AZ has?

Thanx for your work!

Hello,

KernelSize -> 6584320 bytes
FirmwareSize -> 47542272 bytes
Total = 54126592

256Mb = 268435456 bytes
((100/268435456)*47542272) = 17,71%

Nb : Kernel isn't on the DOM. You have a other memory flash on the motherboard.

Regards.

[Blagi]

Aha, I see... Thanx! ;)

[Blagi]

Hectore and all the other pros, I have a question...

Let's say that - for the sake of an argument :D - CrossEPG works flawlessly, Subtitles plugin by Damir works flawlessly, MountW*i*z*a*r*d works flawlessly etc. Let's say that one wants one's box to be all it can be, so one installs all those plugins and so on.

Would we need a SWAP file, in that case? Would it help?

Should we mount a USB memory stick and put the SWAP file on it, together with XMLTV/crossepg folder, so all of CrossEPG files go there, subtitles are also placed there, picons folder is there, too and whatever else might be better off there, so we don't clog-up the memory, which, if I remember correctly, in the plugins department was around 40% free, before one starts downloading things...

What would be the best course of action?

[Hectore]

Hello,

You have a swap partition on your dom when you install E2 with jazup.
Now if you want more space on your dom, you must take a larger dom. (1GB is enough). You can take a SD adaptator to replace your original dom. it's cheaper that a real dom. Look after on €b@y.

When you install e2, jazup detect that your dom is larger that 256Mb and create a extended partition.

Regards.
Hectore

[Blagi]

OK, how big is that SWAP partition created by JAZUp, please [I am back to OFW, so can't check]?

Also, what about my other questions, re. all the other applications that require some space, so...

You see, we all have a USB stick lying around but we don't have a larger DOM about...

Thanx!

[Doume]

The problem is'nt the swap, but available space into root filesystem

I think Azup creates a wrong partitioning, reducing this available space
But Jazup do it fine....

[antonis13]

does anyone know why don' t work the openvpn in RTI V1, while working at RC12 ;

[Blagi]

Yes, Doume but there is a lot to be put somewhere:

-picons could go in excess of 40-50 MB alone
-subtitles - depending on the person...
-XMLTV - well, again, depending on how many providers and for how many days one chooses EPG to be downloaded - but it may well be in tens of MB, too...

And so on...

Hence, recognising and mounting a USB memory stick is important, it seems to me.

Then, in each of those plugins [CrossEPG etc.] one needs to send those folders to USB memory stick...

That, to my mind, might free some memory and make it all faster and more stable...

Am I wrong, on the level of principles?

[Carp95]

Edit fstab file


rootfs / auto defaults 1 1
proc /proc proc defaults 0 0
devpts /dev/pts auto mode=0620,gid=5 0 0
usbfs /proc/bus/usb usbfs defaults 0 0
tmpfs /var tmpfs defaults 0 0
tmpfs /tmp tmpfs defaults 0 0
/dev/hda2 /boot auto rw 0 0
/dev/hda3 swap swap defaults 0 0
/dev/hda5 /media/cf auto defaults 0 0
/dev/sda1 /media/usb auto defaults 0 0
/dev/sdb1 /media/usb auto defaults 0 0


reboot

Create map on USB called picon and place them there - works

Change store setting for CrossEPG to media/usb reboot - works


.srt goes on hdd where you put your movies

[digihoe]

Edit fstab file


rootfs / auto defaults 1 1
proc /proc proc defaults 0 0
devpts /dev/pts auto mode=0620,gid=5 0 0
usbfs /proc/bus/usb usbfs defaults 0 0
tmpfs /var tmpfs defaults 0 0
tmpfs /tmp tmpfs defaults 0 0
/dev/hda2 /boot auto rw 0 0
/dev/hda3 swap swap defaults 0 0
/dev/hda5 /media/cf auto defaults 0 0
/dev/sda1 /media/usb auto defaults 0 0
/dev/sdb1 /media/usb auto defaults 0 0


reboot

Create map on USB called picon and place them there - works

Change store setting for CrossEPG to media/usb reboot - works


.srt goes on hdd where you put your movies

I have USB drives connected with more than one partition and this is how I managed it.

rootfs / auto defaults,errors=remount-ro,data=writeback,noatime,nodirat ime,nobh,commit=1 0 1
proc /proc proc defaults 0 0
devpts /dev/pts auto mode=0620,gid=5 0 0
usbfs /proc/bus/usb usbfs defaults 0 0
tmpfs /var tmpfs defaults 0 0
tmpfs /tmp tmpfs defaults 0 0
/dev/hda2 swap swap defaults 0 0
/dev/hda5 /media/cf auto defaults 0 0
/dev/hdb1 /media/hdd auto defaults 0 0
/dev/sda1 /media/usb auto defaults 0 0
/dev/sda2 /media/usb1 auto defaults 0 0
/dev/sda3 /media/usb2 auto defaults 0 0
/dev/sdb1 /media/usb3 auto defaults 0 0
/dev/sdb2 /media/usb4 auto defaults 0 0

The only problem I'm having is I want read and write support for NTFS partitions, does anyone have a clue how to set it up or if we need new drivers for support for that?

[dvb9999]

Unable to download RTi Core v1.0 .

[moicas3004]

I have USB drives connected with more than one partition and this is how I managed it.

rootfs / auto defaults,errors=remount-ro,data=writeback,noatime,nodirat ime,nobh,commit=1 0 1
proc /proc proc defaults 0 0
devpts /dev/pts auto mode=0620,gid=5 0 0
usbfs /proc/bus/usb usbfs defaults 0 0
tmpfs /var tmpfs defaults 0 0
tmpfs /tmp tmpfs defaults 0 0
/dev/hda2 swap swap defaults 0 0
/dev/hda5 /media/cf auto defaults 0 0
/dev/hdb1 /media/hdd auto defaults 0 0
/dev/sda1 /media/usb auto defaults 0 0
/dev/sda2 /media/usb1 auto defaults 0 0
/dev/sda3 /media/usb2 auto defaults 0 0
/dev/sdb1 /media/usb3 auto defaults 0 0
/dev/sdb2 /media/usb4 auto defaults 0 0

The only problem I'm having is I want read and write support for NTFS partitions, does anyone have a clue how to set it up or if we need new drivers for support for that?

I think you can't write in NTFS on linux.

[tx0]

I cant put the box into the rescue mode with that fw. SNAFU.
Help Anyone?

[skyline]

@ tx0

Use Azup or Jazup to swich the box into rescue mode.

[tx0]

@ tx0

Use Azup or Jazup to swich the box into rescue mode.

I've tried m8, the box just reboots. 2 different sticks and one USB drive.

[Egyptian11]

I've tried m8, the box just reboots. 2 different sticks and one USB drive.

I'll try to help you
but pls forgive for my bad Englisg
1- copy old batch named ( patch.bin ) into your USB
2- Put your USB in AZBox and PowerOn
3- you'll see rescue mode
4- connect your ADSL connection into your Azbox
5- after few sec's you'll see your IP adress
6- remove your USB from your Azbox
7- copy your IP adress into your AZUp ( use AZUp v 2.0.7 )
8- pess go and after few sec's chose your batch RTI
remember : You must chang your batch name to ( patch.e2 )
I hope I can help you

[simon30000]

@tx0 reboot box

as it starts to boot press volume up button. and keepit pressed in till resue mode shows

give it a couple trys

best wishes

[simon30000]

i tried the new sci0 driver the ripper posted other day on other forum

uk card has init fail on V1.0 just passing on the info guys not trying to break the rulzz

rti team thankyou for your continuous support on aze2

your work is appreciated 1000%

:victory-045::respect-048::respect-048::respect-048:

ps :congratulations-008 on succsess getting e2 on az

best wishes to the whole team from me

[tx0]

I'll try to help you
but pls forgive for my bad Englisg
1- copy old batch named ( patch.bin ) into your USB
2- Put your USB in AZBox and PowerOn
3- you'll see rescue mode
4- connect your ADSL connection into your Azbox
5- after few sec's you'll see your IP adress
6- remove your USB from your Azbox
7- copy your IP adress into your AZUp ( use AZUp v 2.0.7 )
8- pess go and after few sec's chose your batch RTI
remember : You must chang your batch name to ( patch.e2 )
I hope I can help you

failed on step 3. it just reboots normally.

[primarijus]

failed on step 3. it just reboots normally.

you must have DHCP on your router

[tx0]

@tx0 reboot box

as it starts to boot press volume up button. and keepit pressed in till resue mode shows

give it a couple trys

best wishes

now it shows F:192.168.1.111 but I cant ping this address from ethernet interface.

[Egyptian11]

failed on step 3. it just reboots normally.

what patch you are use into your Azbox ?
try to reistal old ver E2 patch first ( patch.bin )
and after do all 8 steps

[tx0]

Egyptian, thanks mate! :respect-051:
I've installed RC6 then used backto official patch.e2. then installed official (not really but its running) :D
The reason I've downgraded its not the card reader, tho it would be nice to have that updated sci driver for future.
It's because while playing MKV with DTS sound - after a few minutes sound goes bad and then
the picture disappearing for a few seconds and so on.. quite unstable and I'm trying to play that file on official fw

[Egyptian11]

Egyptian, thanks mate! :respect-051:
I've installed RC6 then used backto official patch.e2. then installed official (not really but its running) :D

that's good :respect-048:
I hope every thing is Ok with you now

[digihoe]

I think you can't write in NTFS on linux.

On regular linux you can edit the fstab file to this;


/dev/sda1 /mnt/windows ntfs-3g defaults 0 0

but I have not checked if ntfs-3g is included in the drivers or if it is possible to make install of it..