HELP!!!!! Stuck in rescue mode

[ManikM]

guys, ive used JAZUP to get SPAZE image on, i chose target USB, it all looks to have gone through ok 100% ....and said disconnecting, rebooting.

but my AZ just goes into rescue mode (there is no display on tv) should there be when its in rescue mode?

it comes up with RESCUE MODE? and then the IP address shows up 192.168.0.7.

im running the process again, but surely it should just bought into E2 no?

log file:

Powered by The Ripper, telesat && MickeySa ;)

Linux/mips 2.6.29.4-13-the-ripper



(none) login: root
Password:
#
JaZUp! is connected to your AZbox IP: 192.168.0.7

Your AZbox kernel is Enigma2

Your AZbox is in rescue mode
KernelSize -> 6556672

Your AZbox CPU mode is normal

Description Kernel : 2.6.29

FTP sending data kernel...
FTP Connected Send : kernel-jazup
FTP Send is true

FTP Transfer Ok!

Copying kernel (Hot!)... Please wait, this operation takes time!
FirmwareSize -> 51200000

ID Team : Spaze_Team1.0

ID Enigma : 1.0.0

Version : Enigma2
USB is selected for Upgrade

Your current kernel doesn't support ext4, back to ext3.

Checking availability of destination...

Checking E2 partitions...

Creating E2 partitions...

Formatting E2 partitions...

Formatting Extended partitions... Please wait! This operation can take a very long time.

FTP sending data Firmware E2...
FTP Connected Send : image2-jazup
FTP Send is true

FTP Transfer Ok!

Creat Swap...

Mounting MMP, please wait!

Mounting firmware, please wait!

Copying E2... Please wait, this operation takes time!

Setting correct Mount Point...

Cleaning up Cramfs...

Unmounting MMP and Root...

Swap off.

Rebooting...
Disconnect

JaZUp! is disconnected from your AZBOX

[ManikM]

so.....basically, the USB stick wasnt booting with E2 on it.

i ended up installing it to DOM and its fine.

not too impressed with the image TBH, but good work anyway, maybe i havent played with it enough.