Humax 54000z, and Gladiator sssp!... Bit of help please and thank you?

[glenviewjf]

Forgive me if this is against the rules, but i just seen a few threads about below so hopefully it'l be ok!

Ok so basically I heard a few mates got their old Technomates non linux boxes acting as clients through Sssp...

I was intrigued and thanks to a mate i acquired a Humax 5400z Saturday...

Flashed it with non original firmware...

Change the ToH Config to this:



CAID Preselect Card+S+Emu
Card Blocker ECM+EMM
Sharing Protocol Mode SSSP



Downloaded the application Gladiator for Sssp...

http://img856.imageshack.us/img856/5724/snap1s.png

Configured it..

Added 2 lines, one from my own server and one external server, both connected up...

http://img16.imageshack.us/img16/4467/snap2b.png

But no channels cleared..

Used an up to date Gladiator and still the same!

Its logging ok just not clearing!

http://img217.imageshack.us/img217/2493/snap3kh.png

I wonder is it cause im using a usb to serial adapter?

It flashed the new firmware ok so i'm puzzled!

Any advice will be great-fully appreciated!

[mmg123]

GLENVIEWJI, MATE.

Try these settings.

(Configuration)
- PC ''Ýnternet'' <=== rs-232 cable ===> Humax 5400

- CARD+EMU+S
- CARD+S+EMU
- ECM+EMM & OFF
-SSSP
- Nagra2 AU -> OFF :respect-051:

[glenviewjf]

(Configuration)
- PC ''Ýnternet'' <=== rs-232 cable ===> Humax 5400


Guess thats just a general set up like i have done?

Plug in the null modem cable to the pc and to the humax...


- card+EMU+S
- card+S+EMU
- ECM+EMM & OFF
-SSSP
- Nagra2 AU -> OFF

How do you mean "card+emu+s" and "card+s+emu" as you can only select one??

Same with "ecm+Emm &off" you can only select one there aswell..

Any chance of a further explanation?

Thanks by the way..

[mmg123]

Just tested with mine settings in hummy.

Caid Presellect card-emu-cs

Card blocker off

Shareing protocol mode sssp DSR

Nagra au off


Works perfect channels clearing hellas, bulsat You have also started up vplug yes.

[glenviewjf]

Just tested with mine settings in hummy.

Caid Presellect card-emu-cs

Card blocker off

Shareing protocol mode sssp DSR

Nagra au off


Works perfect channels clearing hellas, bulsat You have also started up vplug yes.

Cheers mate...

Haven't heard about the Vplug?

Are you using keys for that Bulsat though?

[mmg123]

In folder you will see start 1 start 2 Do has you have done when you start 2 but when you start 1 the vplug high light vplug top left corner and clink on it to active.

All should be well, :respect-054:

[glenviewjf]

Sorry im probably blind but i cannot see Start1 or Start2 in the folder?

I want to use this as a ccam client..

I have edited the gladiator cfg adding the cline...

Started gladiator...

Connected to the humax..

Started ccam on gladiator..

It connects but nothing clears..

Its puzzling as the cline connects grand to my server...