dish

[benen]

i have a 1.1 dish and getting it hard 2 clear 0.8 west ate these channela hard 2 pickup.i am in monaghan roi 90 miles north of dublin
thanks benen

[mike p]

Hi Benan,

I am down in Cork using the same size dish on a motorised setup and can receive
above Satellite ok. When you say clear do you mean the channels are coming up
with scrambled channel? Or do you mean you are not able to lock onto the
satellite and scan for Transponders. If its the latter check that you are aligned
correctly and using active Transponders. If you google for this information you will
find sites that can supply same. By your post i am assuming you are using a fixed
setup if this is the case i have listed correct dish info etc for your area. Hope this is of some help.


Address: monaghan ireland
Latitude: 54.2485°
Longitude: -6.9692°

Satellite: 0.8W INTELSAT 10-02 | THOR 5 | THOR 6
Elevation: 27.8°
Azimuth (true): 172.4°
Azimuth (magn.): 177.1°

Regards,
Mike

[benen]

no signal on most of them, getting 1west and my setup is disqe.

[Mickha]

There are a lot of channels/packages, on 0.8W, using different beams, can you please be more specific regarding the frequencies you're having problems with.

It could be down to the dish moving slightly or even a failing LNB, what signal strength/quality readings do you have, and what receiver are you using?

[Plessy]

no signal on most of them, getting 1west and my setup is disqe.

Any 90 foot trees to your West ?

[TonyO]

In the summer trees and foliage grow, as much as I like green stuff you got to keep it away from sat dishes !

[benen]

my box is spiderbox and i cant get any signal on 0.8.west .have 5 west and the sky is clear .i am getting 91 s and 80q on canal+axtra3d and it scramble no signal on any thing else, clear 1 west, cant not understand has it on my technomate56000

[benen]

my dish is motorised 42 east 30 west

[heathercar]

[QUOTE=benen;807599].i am getting 91 s and 80q on canal+axtra3d and it scramble no signal on any thing else, clear 1 west,

it sounds like you need to do a factory reset or something could be you accidently changed some settings by mistake as you should be getting signal from other channels if your picking up such a strong signal from canal + 3d

[benen]

all ok now ,was not on it, cant see my dish went on west and finily hit on it
thanks for all the help i got here
benen