Blagi
31-08-2011, 12:31 AM
Install E2 in DOM/flash. Plug USB stick, formatted in EXT3.
Reboot AZ HD at the back, press and hold the > button (front of AZ HD), 'till you have the IP address on VFD.
Start AZUp 2.07 or higher: put the AZ HD IP address, tick USB and EXT3, format extended partition & copy kernel -> press (at the bottom) INSTALL OFFICIAL FW, choose the 2 files for it (say, 5308 OFW) and wait...
Where to get the dual boot OFW? Here:
http://www.megaupload.com/?d=PVJ7M3QJ
When it's done and it reboots sometimes it won't work immediately: you need to ignore possible "upgrade" screens and choose "Boot without update"!
What are you looking for? When booting, you need to (eventually) see "sleep=15s".
Then, your OFW will boot and you can update it normally, installing channel list, OpenXCAS, MultiCAS, OSCam, Priority Manager 2.5, GetEPG 2.5, Tech*s*a*t*k*e*ysDownloader and all else, as usual...
Pingflood is developing "Boot OFW" plugin from E2 without rebooting - but in SPAZE Fix it isn't working...
That's gonna be cool. We wait...
Reboot AZ HD at the back, press and hold the > button (front of AZ HD), 'till you have the IP address on VFD.
Start AZUp 2.07 or higher: put the AZ HD IP address, tick USB and EXT3, format extended partition & copy kernel -> press (at the bottom) INSTALL OFFICIAL FW, choose the 2 files for it (say, 5308 OFW) and wait...
Where to get the dual boot OFW? Here:
http://www.megaupload.com/?d=PVJ7M3QJ
When it's done and it reboots sometimes it won't work immediately: you need to ignore possible "upgrade" screens and choose "Boot without update"!
What are you looking for? When booting, you need to (eventually) see "sleep=15s".
Then, your OFW will boot and you can update it normally, installing channel list, OpenXCAS, MultiCAS, OSCam, Priority Manager 2.5, GetEPG 2.5, Tech*s*a*t*k*e*ysDownloader and all else, as usual...
Pingflood is developing "Boot OFW" plugin from E2 without rebooting - but in SPAZE Fix it isn't working...
That's gonna be cool. We wait...