PDA

View Full Version : latest jazup just killed my box


kmc
08-09-2011, 08:40 PM
Hi all,
Tried to update box to enigma with jazup,got so far through then errored out,tried again and the same happened,tried to restore original firmware,again nothing happened,now i have a menu screen coming up with usb update and other options,problem i have now is there is no ip details in my azbox,jazup can't see it,tried turning on and off and and formatting the area absolutely nothing other than that screen.
any help appreciated on trying to restore my box.
cheers
kmc:mad:
Carp95
08-09-2011, 09:00 PM
now i have a menu screen coming up


Looks you're ok m8

Format usb stick with fat32, place latest original fw on stick called patch.bin and boot, choose option4 and then option 1
Fieltshop
08-09-2011, 09:05 PM
Try to update the box with the Fw on the usb and use the usb update option,

Sorry, i did not see your reply Carp95
kmc
08-09-2011, 09:16 PM
cheers guys i'll try that and see what happens,fingers crossed the doms not buggered
cheers
kmc
pr2
08-09-2011, 09:24 PM
Hi,

There is a full .PDF provided with JaZUp and you didn't take the time to read it.... so don't say that JaZUp kill your box when it doesn't.
Learn to read the manual before using a tool...

Pr2
kmc
08-09-2011, 09:38 PM
cheers lads,it's come back to life,don't know if i want to try reflashing it again now.
been in this game for 6 years now and and with all the different boxes i've had this is the first bad flash.
cheers again
kmc
zeini
08-09-2011, 09:38 PM
I think JazUp a lot better than AzUp. But it would be very usefull to have a new version. In this new version ext4 Partition should not be by default on.
kmc
08-09-2011, 09:42 PM
Hi,

There is a full .PDF provided with JaZUp and you didn't take the time to read it.... so don't say that JaZUp kill your box when it doesn't.
Learn to read the manual before using a tool...

Pr2

I don't want to get into an argument,because i'm not the argumentative type,but i read the manual over and over again and followed it to the letter,it crashed at about 60% and wouldn't go any further,tried again and nothing.
cheers
kmc
zeini
08-09-2011, 09:48 PM
@kmc:
I think you have not the check mark from ext4 partition deleted.
kmc
08-09-2011, 09:52 PM
@kmc:
I think you have not the check mark from ext4 partition deleted.

i'll take a look at that zeini,
thank you
kmc
sonic1
08-09-2011, 10:00 PM
Hi,

There is a full .PDF provided with JaZUp and you didn't take the time to read it.... so don't say that JaZUp kill your box when it doesn't.
Learn to read the manual before using a tool...

Pr2

From someone who is heavily involved that really is bad support.
kmc
09-09-2011, 12:19 AM
all sorted,with the new pb image,used jazup,but followed azup instructions as they were easier to understand,
thanks again to everyone with there help.
now the fun begins.
cheers
kmc
Hectore
09-09-2011, 08:19 AM
From someone who is heavily involved that really is bad support.

You should read this forum more often. It has been said that we stop the devloppement and support of JaZup.
Why continue to strive for a corpse that is azbox?!

@ Kmc
And if you were satisfied with Azup, why you are using jazup then?
Condolences for your box. RIP
pr2
09-09-2011, 03:05 PM
Which bad support, we are the only one to provide a full user guide when we release a software (Jazup) or a tutorial (how to recover an Azbox stuck in booting). Yes we provide bad support because we don't repeat each time the same things over and over just to have the message counter increasing to try to get an higher status. :-)

In the past, RTi proudly announced that they switch to ext4 now they return to ext3, yes indeed this cause the 60% stop in the process because the kernel is no longer able to mount in ext4. But this doesn't brick the Azbox.

But as already stated we won't release any new version of Jazup so we no longer provide updates even on do***entation.

Pr2
kmc
09-09-2011, 05:30 PM
And if you were satisfied with Azup, why you are using jazup then?
Condolences for your box. RIP[/QUOTE]

@hectore,if you read my post correctly,i used the azup instructions not azup itself(can't use azup because i can't get it to open on my pc),and again if you bothered to read my post correctly,it actually says i've got it working.

if a mod would like to close this thread please do so as it's now sorted, also it's going to end up with back biting and this forum is about helping each other.
cheers
kmc