PDA

View Full Version : Thor 0.8



haji24
05-10-2011, 07:54 PM
Some how recently i got issue which i cant receive any channel as i used to. does anyone know or have a same problem?

Mickha
05-10-2011, 08:22 PM
Caqn you please post more information:
General Location
Dish Size, Motorized or Fixed.
Receiver

Are you getting any signal, on any transponders?

This sounds more like an installation problem, faulty LNB, loose cable, dish moved, or incorrectly st up in the motor settings, but without more information I'm only guessing.

haji24
05-10-2011, 09:49 PM
i got dm8000hd with motorised 1.1 triax dark motor i never had issue before only recently started. coz i get other sat's such as 30.W, 4.8e.7e,9,13e,15.8,19e,23.5e.26,e ,28e,42e. if there was an issue with cables or dish lnb i wouldnt be able to get all this.

Mickha
05-10-2011, 10:50 PM
Are you using Usals or Diseqc 1.2 to drive the motor?

Have you recently changed/upgraded anything in your DM8000HD, channel list, plug ins, image, etc..

What signal strength/quality readings are you getting from the various satellites, have you noticed any difference in quality?

Are you getting any signal strength, quality, readings off 0.8W?

haji24
05-10-2011, 11:26 PM
i use Diseqc 1.2. no i havent change anything. even i tried manually to search for the sat n it wont lock at all been trying alot of the frequency. no very poor signal -23 to -54 i am using Pli image

echelon
05-10-2011, 11:38 PM
i use Diseqc 1.2. no i havent change anything. even i tried manually to search for the sat n it wont lock at all been trying alot of the frequency. no very poor signal -23 to -54 i am using Pli image

well , I can assure you that sat position is fine , just been sorting out my spiderbox on that very position and signal and quality were standard levels

haji24
05-10-2011, 11:50 PM
you have a good signal on thor 0.8. what frequency are you using. what would you think would be the issue and any recommendation how to sorted it. thanks

Mickha
05-10-2011, 11:51 PM
Try moving your dish to 4.8E, then make a note of its position, then move it to 5W and again make a note of it's position and how long it took to move there, now try movin it 4 degrees east, which is less than half way back and try searching for a very strong transponder, which depends on your location, you should have no problem finding 0.8W, but ensure you are using an active transponder, try Kanal 10 Norge, on the K1 beam, 10872 V 24500

echelon
05-10-2011, 11:57 PM
you have a good signal on thor 0.8. what frequency are you using. what would you think would be the issue and any recommendation how to sorted it. thanks

I always use music channel on 11900H 28000 and bbc world news on 11862H 28000 , both are free to air

TonyO
05-10-2011, 11:59 PM
Do you get any FTA channels on 1W ?

haji24
06-10-2011, 12:13 AM
cheers for the advice still no joy, i'll have ago tomorow again.

haji24
06-10-2011, 12:14 AM
dont have a 1W as a sat only thor 0.8

echelon
06-10-2011, 12:51 AM
dont have a 1W as a sat only thor 0.8

just use that then , and assume he is asking if you get any channels at all on 0.8w