nemesis 2.5

[kennyboy]

NEMESIS 2.5 104r4 Dual Enigma on-line, next step 105r1
Latest 2.4 101r1 stable version Here
Latest 2.3 095r6 stable version Here


Attention for all users!
Please read change-log 100r8, 101r1 and here before updating!!!

Next step 105r1
Updated 16.02.2012-14:30



All updates until 104r4 are included
All updates until 103r5 are included
All updates until 102r8 are included
Added time syncronization via Internet at dreambox boot (OpenVPN improvement)
Update dreambox-dvb-modules to 20120216 for all machines
Update to InitramFS 2.5 dm7020hd (thanks @gutemine)
Update dreambox-secondstage to 86r0 for dm7020hd
Fix crash on manual scan on mode 2
Fix enable swap file on reboot
Fix load EPG from backup on reboot
Add preview for Picon
Small fix on Addons Panel
Update enigma2-plugins
Up
Nemesis 2.5 Release 104r4 (On-Line)
Updated 14.02.2012-17:30



All updates until 103r5 are included
All updates until 102r8 are included
Update to InitramFS 2.4, for all Machines (thanks @gutemine)
Update dreambox-dvb-modules to 20120213 for all machines
Update dreambox-secondstage to 85r0 for dm7020hd
Update Enigma2 to 3.2.2 (20120214)
Update Kernel
Full support for USB-DTT in both mode 1 and 2
You can now choose between 3 different Extended InfoBar (Lite, Medium or Full)
Blue->Yellow->Setup Extended InfoBar OSD->Choice Extended InfoBar type


Code optimization on Blue Panel
Code optimization on Addons Panel
Update enigma2-plugins
Up
Release 103r5 (Private Release)
Updated 03.02.2012-14:00



All updates until 102r8 are included
Update dreambox-dvb-modules to 20120202 for all machines
Update Bootlogo for version 2.5 (thanks @XPlanet)
Replaced the old default skin, with the new eXcort luX (thanks @mmark & Stardust)
Code optimization on Blue Panel
Move to 2.5 version
Update enigma2-plugins
Up
Release 102r8 (Private Release)



All updates until 101r1 are included
Update bootlogo
Add skin Preview on Addons Panel
Update CrossEPG
Update to InitramFS 2.2, for all Machines (thanks @gutemine)
Update Kernel (add EFI/GPT partition recognition support, enable large block device support)
Update PCSC-Lite to 1.8.2
Update gst-plugin-good (raise dts, ac3 and aac parse elements' ranks)
Update libpagecache (fix occasional program aborts/crashes (e.g. on e2 recording stop))
Downgrade plugin bitrateviewer, now work in both mode 1 and 2
Update to Webinterface 1.7.1
Change Green Button text "Initialize" to "Manage" on HDD Manager Screen
Fix Automatic download on StayUp plugin
Fix crash on HDD Manager
Fix crash on EPG Info Screen when plugin EasyInfo is installed
Fix some Italian translation
Update enigma2-plugins
Up
Release 101r1


All updates until 100r8 are included
Fixed EPG data loss at the transition between Enigma2 modes
Removed unused entry(Backup EPG, Save EPG) on Green Panel in Mode 1
Fix CrossEPG on Mode 1 (Enigma2 3.2) on dm7020hd
Add possibility to choice demux for CrossEPG
Blue->Yellow->EPG Configuration->CrossEPG demux


Small fix on default Skin
Up
Release 100r8 (Private Release)


All updates until 099r1 are included
Update radio.mvi screen logo
Add enable/disable deepstandby function on front power button long press
Blue->Yellow->Setup Console/RC/Enigma->Enable deepstandby on front power button long press


Add new choice "do nothing" on RC 'Action on long powerbutton press'
Add Unwanted Reboot Manager
Blue->Yellow->Setup Console/RC/Enigma->Go to standby after (unwanted) reboot


Update skin default
Replace HD-Glass-15 skin to old skin default
Fix HDD info on Device Status Panel
Update Plugin StayUP, Fix load epg on Mode 1
Fix Mode 2 on dm7020hd now enigma run in both mode 1 & 2
Load EPG in a cache without restart Enigma2 on E2 3.2.1 (Thank's Dr.Best)
No plugin epgloader need!!!! Plese do not install it!!!!
If you have epgloader plugin in your box, please remove it, before upgrade

Update Linux Kernel (Small fix)
Update bootlogo
Update dreambox-dvb-modules to 2011109 dm500hd, 800, 800se, 8000
Update dreambox-dvb-modules to 2011121 dm7020hd
Update Mode 1 enigma2 to 3.2.1
Partially rewrited Green Panel (Epg Control Center)
Fix crash on Mode 2 on System Info (Yellow and Blue Button)
Fix crash on Mode 2 using new setting created by Blindscan (I hope :))
Fix loading kernel module for rt3070 based WIFI Adapter
Fix skin to support new Harddisk Manager
Update Italian translation
Update enigma2-plugins
After updating, and reboot, you do mount HDD with new Harddisk Manager!

Menu->Setup->System->Harddisk
Up
Release 099r1


All updates until 098r6 are included
Update bootlogo
Fix crash on Timer function
Update LED Manager plugin to 0.2
Re-add epgblacklist on Enigma Experimental (Mode 2)
Update enigma2-plugins
Up
Release 098r6


All updates until 095r6 are included
Move to 2.4 version
Changed bootlogo
Update dm7020hd dreambox-dvb-modules (20111102)
Add LED Manager plugin
Add full new Enigma 3.2 features (Only Using Mode 1)
Update enigma2-plugins
Update CrossEPG (Now you do download Rytec Provider)
You can run this image in two mode:

Mode 1: Enigma2 3.2


Blindscan Support (Tuner: BCM4505, BCM4506, Alps BSBE1 C01A/D01A)
Limited CrossEPG patch
No LCN Scanner patch
Full Enigma2 3.2 features
Mode 2: Enigma2 Experimental


No Blindscan Support
Full CrossEPG patch
LCN Scanner patch
More Enigma2 binary patch
After flashing, the image start in Mode 1: Enigma2 3.2
If you want change Mode, you can choose enigma2 to run via Blue Panel:


Blue->Yellow->Configure Console/RC/Enigma->Select Enigma Version
Restart Enigma2
Up
Release 095r6 (Latest 2.3 Version)


Update to InitramFS 1.8, for all Machines (thanks @gutemine)
Fix some italian translation
Update Lithuanian Language (Thanks @adga)
Update sqlite to 3.6.23.1 (dm7020hd)
Update CCID to 1.4.5
Update CrossEPG
Update CrossEPG (mpepg.conf) for Mediaset (Thanks @pappa)
Add MerlinEPGCenter plugin on Extension
Add New RC config (Enigma Key Green Swap) Green Key Press = subchannel
Green Key Press >1s = EPG Manager
Blu->Yellow->Setup Console/RC to choice RC Map.

Update enigma2
Update enigma2-plugins
Up
Update to new release Instruction

This Update work only if you have a Nemesis svn >= 098r6!!!!

If you have a SVN version < 092, or SSL < 84, follow this:

Flash SecondStage Loader 84-r0 (nfi version)
Reboot
Flash Image SVN 104r4
Reboot
If you have a SVN version >= 092, or SSL = 84

You can directly flash a new 104r4

[kennyboy]

NEMESIS 2.5 105r4 Dual Enigma on-line (Not 7020hd)
Latest 2.4 101r1 stable Here , or 2.3 095r6 stable Here


Attention read carrefully!
to do before upgrade to 105r4!!!!



Remove all Skins installed from Addons and reboot with de default skin
the old skins are no more compliant with the 105r4
Only for dm7020hd download dreambox-secondstage-86r0 and install it via web-if
proceed with the upgrade on-line
Nemesis 2.5 105r4 (On-Line)
Updated 23.02.2012-13:30



All updates until 104r4 are included
All updates until 103r5 are included
All updates until 102r8 are included
Update Kernel
Added full german locale translation (thanks @bigstar2005)
Added time syncronization via Internet at dreambox boot (OpenVPN improvement)
Update dreambox-dvb-modules to 20120216 for all machines
Update to InitramFS 2.5 for all machines (thanks @gutemine)
Update dreambox-secondstage to 86r0 for dm7020hd
Fix crash on manual scan on mode 2
Fix enable swap file on reboot
Fix load EPG from backup on reboot
Fix hang on addons panel on dm800
Fix bug on HDD Manager, now network share as hdd replacement is correctly mounted
Add preview for Picon and Boologo
Small fix on Addons Panel
Update enigma2-plugins
Up
Nemesis 2.5 Release 104r4
Updated 14.02.2012-17:30



All updates until 103r5 are included
All updates until 102r8 are included
Update to InitramFS 2.4, for all Machines (thanks @gutemine)
Update dreambox-dvb-modules to 20120213 for all machines
Update dreambox-secondstage to 85r0 for dm7020hd
Update Enigma2 to 3.2.2 (20120214)
Update Kernel
Full support for USB-DTT in both mode 1 and 2
You can now choose between 3 different Extended InfoBar (Lite, Medium or Full)
Blue->Yellow->Setup Extended InfoBar OSD->Choice Extended InfoBar type


Code optimization on Blue Panel
Code optimization on Addons Panel
Update enigma2-plugins
Up
Release 103r5 (Private Release)
Updated 03.02.2012-14:00



All updates until 102r8 are included
Update dreambox-dvb-modules to 20120202 for all machines
Update Bootlogo for version 2.5 (thanks @XPlanet)
Replaced the old default skin, with the new eXcort luX (thanks @mmark & Stardust)
Code optimization on Blue Panel
Move to 2.5 version
Update enigma2-plugins
Up
Release 102r8 (Private Release)



All updates until 101r1 are included
Update bootlogo
Add skin Preview on Addons Panel
Update CrossEPG
Update to InitramFS 2.2, for all Machines (thanks @gutemine)
Update Kernel (add EFI/GPT partition recognition support, enable large block device support)
Update PCSC-Lite to 1.8.2
Update gst-plugin-good (raise dts, ac3 and aac parse elements' ranks)
Update libpagecache (fix occasional program aborts/crashes (e.g. on e2 recording stop))
Downgrade plugin bitrateviewer, now work in both mode 1 and 2
Update to Webinterface 1.7.1
Change Green Button text "Initialize" to "Manage" on HDD Manager Screen
Fix Automatic download on StayUp plugin
Fix crash on HDD Manager
Fix crash on EPG Info Screen when plugin EasyInfo is installed
Fix some Italian translation
Update enigma2-plugins
Up
Release 101r1


All updates until 100r8 are included
Fixed EPG data loss at the transition between Enigma2 modes
Removed unused entry(Backup EPG, Save EPG) on Green Panel in Mode 1
Fix CrossEPG on Mode 1 (Enigma2 3.2) on dm7020hd
Add possibility to choice demux for CrossEPG
Blue->Yellow->EPG Configuration->CrossEPG demux


Small fix on default Skin
Up
Release 100r8 (Private Release)


All updates until 099r1 are included
Update radio.mvi screen logo
Add enable/disable deepstandby function on front power button long press
Blue->Yellow->Setup Console/RC/Enigma->Enable deepstandby on front power button long press


Add new choice "do nothing" on RC 'Action on long powerbutton press'
Add Unwanted Reboot Manager
Blue->Yellow->Setup Console/RC/Enigma->Go to standby after (unwanted) reboot


Update skin default
Replace HD-Glass-15 skin to old skin default
Fix HDD info on Device Status Panel
Update Plugin StayUP, Fix load epg on Mode 1
Fix Mode 2 on dm7020hd now enigma run in both mode 1 & 2
Load EPG in a cache without restart Enigma2 on E2 3.2.1 (Thank's Dr.Best)
No plugin epgloader need!!!! Plese do not install it!!!!
If you have epgloader plugin in your box, please remove it, before upgrade

Update Linux Kernel (Small fix)
Update bootlogo
Update dreambox-dvb-modules to 2011109 dm500hd, 800, 800se, 8000
Update dreambox-dvb-modules to 2011121 dm7020hd
Update Mode 1 enigma2 to 3.2.1
Partially rewrited Green Panel (Epg Control Center)
Fix crash on Mode 2 on System Info (Yellow and Blue Button)
Fix crash on Mode 2 using new setting created by Blindscan (I hope :))
Fix loading kernel module for rt3070 based WIFI Adapter
Fix skin to support new Harddisk Manager
Update Italian translation
Update enigma2-plugins
After updating, and reboot, you do mount HDD with new Harddisk Manager!

Menu->Setup->System->Harddisk
Up
Release 099r1


All updates until 098r6 are included
Update bootlogo
Fix crash on Timer function
Update LED Manager plugin to 0.2
Re-add epgblacklist on Enigma Experimental (Mode 2)
Update enigma2-plugins
Up
Release 098r6


All updates until 095r6 are included
Move to 2.4 version
Changed bootlogo
Update dm7020hd dreambox-dvb-modules (20111102)
Add LED Manager plugin
Add full new Enigma 3.2 features (Only Using Mode 1)
Update enigma2-plugins
Update CrossEPG (Now you do download Rytec Provider)
You can run this image in two mode:

Mode 1: Enigma2 3.2


Blindscan Support (Tuner: BCM4505, BCM4506, Alps BSBE1 C01A/D01A)
Limited CrossEPG patch
No LCN Scanner patch
Full Enigma2 3.2 features
Mode 2: Enigma2 Experimental


No Blindscan Support
Full CrossEPG patch
LCN Scanner patch
More Enigma2 binary patch
After flashing, the image start in Mode 1: Enigma2 3.2
If you want change Mode, you can choose enigma2 to run via Blue Panel:


Blue->Yellow->Configure Console/RC/Enigma->Select Enigma Version
Restart Enigma2
Up
Release 095r6 (Latest 2.3 Version)


Update to InitramFS 1.8, for all Machines (thanks @gutemine)
Fix some italian translation
Update Lithuanian Language (Thanks @adga)
Update sqlite to 3.6.23.1 (dm7020hd)
Update CCID to 1.4.5
Update CrossEPG
Update CrossEPG (mpepg.conf) for Mediaset (Thanks @pappa)
Add MerlinEPGCenter plugin on Extension
Add New RC config (Enigma Key Green Swap) Green Key Press = subchannel
Green Key Press >1s = EPG Manager
Blu->Yellow->Setup Console/RC to choice RC Map.

Update enigma2
Update enigma2-plugins
Up
Update to new release Instruction

This Update work only if you have a Nemesis svn >= 098r6!!!!

If you have a SVN version < 092, or SSL < 84, follow this:

Flash SecondStage Loader 84-r0 (nfi version)
Reboot
Flash Image SVN 104r4
Reboot
If you have a SVN version >= 092, or SSL = 84

You can directly flash a new 104r4

[Dig Deep]

Have it on BA - works fine !

[Barney]

hope its ok to post this msg here ..?

i have this image running on my Dm800 SE HD and Dm500HD aswell and the EDG Nemisis Team really have done one hell of a fine job here with this New image EDG NEMISIS v2.5 SVN105r4
It's slick its good its FaB and its got all the toys to play with on top of it being the best image ive used to date ..only 1 thing i'd like to suggest for Future images if i may is that its just missing the all important Pauli Neutrino keymap v7.1 plug-in tool if it can be included in future images and updates thats the only minor improvement i'd like to suggest and hope its taken into consideration .ive been using EDG E2 images for very long time now and i do hope the team stick with this new look it works plus it also looks fantastic too .
i hope my comments can be taken as a postive feedback as intended aswell and i wish to thank all involved with this superb update .

cheers ,
---
Barney

[kennyboy]

if some1 can help me with this image to free some space on ram or memory my hdd as gone down like you say barney plenty on but i need space so if some1 can tell me what to delete and fro where ie skins and other things like taking out the flags and just leaving the 1 you want thanks

[clive01]

if some1 can help me with this image to free some space on ram or memory my hdd as gone down like you say barney plenty on but i need space so if some1 can tell me what to delete and fro where ie skins and other things like taking out the flags and just leaving the 1 you want thanks

very good question that, the new image is great, but they are getting bigger and bigger,and using more and more memory, so i would like to know what i can remove as well, and how, i can do it.

thanks

[kennyboy]

very good question that, the new image is great, but they are getting bigger and bigger,and using more and more memory, so i would like to know what i can remove as well, and how, i can do it.

thanks

i thought the same that why i asked thay are getting bigger more thay add the bigger but i can do without things thanks

[kennyboy]

Download Link:
dm500hd, dm800, dm800se, dm7020hd, dm8000

NEMESIS 2.6 107r5 Dual Enigma


Attention read carrefully!
to do before upgrade to 107r5!!!!



•Remove all Skins installed from Addons and reboot with de default skin
the old skins are no more compliant with the 107r5
•proceed with the upgrade on-line

Nemesis 2.6 107r5 (On-Line)
Updated 29.03.2012-13:00



•All updates until 105r4 are included
•Rewrite device info panel, now are also displayed the network devices
•Update dreambox-dvb-modules to 20120328 fot 800se
•Update dreambox-dvb-modules to 20120322 for 500hd, 7020hd and 8000
•Update Enigma2 to 3.2.2 (20120327)
•Move to 2.6 version
•Added possibility to disable HDD as a device for epg.dat, swap files and skins
•Added possibility to remove HDD on Picon search path
•Update CrossEPG to use new Autodiscover EPG (Only for Nemesis Images)
•Update Bootlogo for version 2.6 (thanks @XPlanet)
•Replaced the eXcort Lux default skin, with the new Nemesis Black Skin by mmark (thanks @mmark & Stardust)
•Added possibility to enable/disable Pig Widget on Skin
Blue->Yellow->Setup Skin->Enable Pig Widget on skin
•Added developer mode for skinner (Thank's @skaman)
•Added Suppprt for Skins on external device
Now you can install skin on, USB/CF/HDD/eSATA devices
(At the moment 0nly skins without Python code modification)
•Added Autodiscover Picon
Discover on: Flash, USB/CF/HDD/eSATA devices and Network Mountpoint
•Added Autodiscover swap file
Discover on: USB/CF/HDD/eSATA devices
•Added Autodiscover epg.dat file
Discover on: Flash, USB/CF/HDD/eSATA devices and Network Mountpoint
•Added device selection for Picon installation
You can install Picon on: Flash, USB/CF/HDD/eSATA devices and Network Mountpoint
•Removed Picon Provider, System e Satellite from image
Now you can install it from Blue Panel->Addons
•Updated italian CVS translation using german locale as reference (Thank's @blu8)
•Updated Nemesis Panel italian translation(Thank's @blu8)
•Updated full german locale translation (thanks @bigstar2005)
•Updated enigma2-plugins

Up
Nemesis 2.5 105r4
Updated 23.02.2012-13:30



•All updates until 104r4 are included
•Update Kernel
•Added full german locale translation (thanks @bigstar2005)
•Added time syncronization via Internet at dreambox boot (OpenVPN improvement)
•Update dreambox-dvb-modules to 20120216 for all machines
•Update to InitramFS 2.5 for all machines (thanks @gutemine)
•Update dreambox-secondstage to 86r0 for dm7020hd
•Fix crash on manual scan on mode 2
•Fix enable swap file on reboot
•Fix load EPG from backup on reboot
•Fix hang on addons panel on dm800
•Fix bug on HDD Manager, now network share as hdd replacement is correctly mounted
•Add preview for Picon and Boologo
•Small fix on Addons Panel
•Update enigma2-plugins

Up
Nemesis 2.5 Release 104r4
Updated 14.02.2012-17:30



•All updates until 103r5 are included
•Update to InitramFS 2.4, for all Machines (thanks @gutemine)
•Update dreambox-dvb-modules to 20120213 for all machines
•Update dreambox-secondstage to 85r0 for dm7020hd
•Update Enigma2 to 3.2.2 (20120214)
•Update Kernel
•Full support for USB-DTT in both mode 1 and 2
•You can now choose between 3 different Extended InfoBar (Lite, Medium or Full)
Blue->Yellow->Setup Extended InfoBar OSD->Choice Extended InfoBar type

•Code optimization on Blue Panel
•Code optimization on Addons Panel
•Update enigma2-plugins

Up
Release 103r5 (Private Release)
Updated 03.02.2012-14:00


•All updates until 102r8 are included
•Update dreambox-dvb-modules to 20120202 for all machines
•Update Bootlogo for version 2.5 (thanks @XPlanet)
•Replaced the old default skin, with the new eXcort luX (thanks @mmark & Stardust)
•Code optimization on Blue Panel
•Move to 2.5 version
•Update enigma2-plugins

Up
Release 102r8 (Private Release)


•All updates until 101r1 are included
•Update bootlogo
•Add skin Preview on Addons Panel
•Update CrossEPG
•Update to InitramFS 2.2, for all Machines (thanks @gutemine)
•Update Kernel (add EFI/GPT partition recognition support, enable large block device support)
•Update PCSC-Lite to 1.8.2
•Update gst-plugin-good (raise dts, ac3 and aac parse elements' ranks)
•Update libpagecache (fix occasional program aborts/crashes (e.g. on e2 recording stop))
•Downgrade plugin bitrateviewer, now work in both mode 1 and 2
•Update to Webinterface 1.7.1
•Change Green Button text "Initialize" to "Manage" on HDD Manager Screen
•Fix Automatic download on StayUp plugin
•Fix crash on HDD Manager
•Fix crash on EPG Info Screen when plugin EasyInfo is installed
•Fix some Italian translation
•Update enigma2-plugins

Up
Release 101r1


•All updates until 100r8 are included
•Fixed EPG data loss at the transition between Enigma2 modes
•Removed unused entry(Backup EPG, Save EPG) on Green Panel in Mode 1
•Fix CrossEPG on Mode 1 (Enigma2 3.2) on dm7020hd
•Add possibility to choice demux for CrossEPG
Blue->Yellow->EPG Configuration->CrossEPG demux

•Small fix on default Skin

Up
Release 100r8 (Private Release)


•All updates until 099r1 are included
•Update radio.mvi screen logo
•Add enable/disable deepstandby function on front power button long press
Blue->Yellow->Setup Console/RC/Enigma->Enable deepstandby on front power button long press

•Add new choice "do nothing" on RC 'Action on long powerbutton press'
•Add Unwanted Reboot Manager
Blue->Yellow->Setup Console/RC/Enigma->Go to standby after (unwanted) reboot

•Update skin default
•Replace HD-Glass-15 skin to old skin default
•Fix HDD info on Device Status Panel
•Update Plugin StayUP, Fix load epg on Mode 1
•Fix Mode 2 on dm7020hd now enigma run in both mode 1 & 2
•Load EPG in a cache without restart Enigma2 on E2 3.2.1 (Thank's Dr.Best)
No plugin epgloader need!!!! Plese do not install it!!!!
If you have epgloader plugin in your box, please remove it, before upgrade
•Update Linux Kernel (Small fix)
•Update bootlogo
•Update dreambox-dvb-modules to 2011109 dm500hd, 800, 800se, 8000
•Update dreambox-dvb-modules to 2011121 dm7020hd
•Update Mode 1 enigma2 to 3.2.1
•Partially rewrited Green Panel (Epg Control Center)
•Fix crash on Mode 2 on System Info (Yellow and Blue Button)
•Fix crash on Mode 2 using new setting created by Blindscan (I hope :))
•Fix loading kernel module for rt3070 based WIFI Adapter
•Fix skin to support new Harddisk Manager
•Update Italian translation
•Update enigma2-plugins
After updating, and reboot, you do mount HDD with new Harddisk Manager!
•Menu->Setup->System->Harddisk

Up
Release 099r1


•All updates until 098r6 are included
•Update bootlogo
•Fix crash on Timer function
•Update LED Manager plugin to 0.2
•Re-add epgblacklist on Enigma Experimental (Mode 2)
•Update enigma2-plugins

Up
Release 098r6


•All updates until 095r6 are included
•Move to 2.4 version
•Changed bootlogo
•Update dm7020hd dreambox-dvb-modules (20111102)
•Add LED Manager plugin
•Add full new Enigma 3.2 features (Only Using Mode 1)
•Update enigma2-plugins
•Update CrossEPG (Now you do download Rytec Provider)
You can run this image in two mode:

Mode 1: Enigma2 3.2

•Blindscan Support (Tuner: BCM4505, BCM4506, Alps BSBE1 C01A/D01A)
•Limited CrossEPG patch
•No LCN Scanner patch
•Full Enigma2 3.2 features
Mode 2: Enigma2 Experimental

•No Blindscan Support
•Full CrossEPG patch
•LCN Scanner patch
•More Enigma2 binary patch
After flashing, the image start in Mode 1: Enigma2 3.2
If you want change Mode, you can choose enigma2 to run via Blue Panel:

•Blue->Yellow->Configure Console/RC/Enigma->Select Enigma Version
•Restart Enigma2

Up
Release 095r6 (Latest 2.3 Version)


•Update to InitramFS 1.8, for all Machines (thanks @gutemine)
•Fix some italian translation
•Update Lithuanian Language (Thanks @adga)
•Update sqlite to 3.6.23.1 (dm7020hd)
•Update CCID to 1.4.5
•Update CrossEPG
•Update CrossEPG (mpepg.conf) for Mediaset (Thanks @pappa)
•Add MerlinEPGCenter plugin on Extension
•Add New RC config (Enigma Key Green Swap)
Green Key Press = subchannel
Green Key Press >1s = EPG Manager
Blu->Yellow->Setup Console/RC to choice RC Map.

•Update enigma2
•Update enigma2-plugins

Up
Update to new release Instruction

This Update work only if you have a Nemesis svn >= 098r6!!!!

If you have a SVN version < 092, or SSL < 84, follow this:
•Flash SecondStage Loader 84-r0 (nfi version)
•Reboot
•Flash Image SVN 104r4
•Reboot

If you have a SVN version >= 092, or SSL = 84 •You can directly flash a new 104r4

Up