JaZUp 2.6 by Hectore & Pr2

[pr2]

Hi,

As promised, a few days after the donators receive it privately, here is the public release of JaZUp 2.6.

Changelog 2.6:
- Fix the no FTP access with OpenRSI image.

Download link for JaZUp 2.6! (http://dl.dropbox.com/u/63899160/JaZUp_2.6_by_Hectore_and_Pr2.zip)

Thanks to all people that donate for JaZUp, it is for them that we release this new version.

Hectore & Pr2

[htibi58]

I tried It with latest OpenPli (..0513), but this 2.60 version is stop with FTP read error too (like 2.50) . I want to install to USB stick (I use Spaze 2.2 in the Flash).

[htibi58]

Maybe not problem with Jazup 2.60 . I tried to install a newer version, OpenPli 05.19 works good.

[pr2]

OpenPli is not releasing any official image for Azbox, so you probably mean OpenRSI.

If you read the OpenRSI readme file you will see that this image is not foreseen to work on USB stick only on internal DOM.

Pr2

[zeini]

No I think he means OpenAZBox (http://openazbox.info/). This is OpenPLi based Enigma 2 for AZBox devices.
But also OpenRSI is based OpenPli at Enigma 2.

[pr2]

Hi,

OpenAzbox is for "Azbox Me" and "mini Me" so you don't need JaZUp for them...

Pr2

[zeini]

Yes, you are right. But RTI said, they would also develop OpenAzbox with new kernel 3.3.1 for "old Boxes", after this is done for new boxes.

[pr2]

Hi,

But this doesn't exist yet, so my first answer to htibi58 was correct.

Pr2

[txemax]

My AZBox HD receiver is connected to the network using PLC ethernet adapter. JaZUp no works: no connect on rescue mode.

[pr2]

Hi,

Does the VFD of your Azbox displayed an IP address? If not then there is no DHCP server on your network.
Can you connect from a PC in telnet to your Azbox in Rescue Mode?

Pr2

[nokixxx]

Hi,

As promised, a few days after the donators receive it privately, here is the public release of JaZUp 2.6.

Changelog 2.6:
- Fix the no FTP access with OpenRSI image.

Download link for JaZUp 2.6! (http://dl.dropbox.com/u/63899160/JaZUp_2.6_by_Hectore_and_Pr2.zip)

Thanks to all people that donate for JaZUp, it is for them that we release this new version.

Hectore & Pr2
Hallo,
I would like to thank.
Please o Added function jazup, Formatting size selection partition.
I doom cf card,and I would like to choose a custom size.
Thank you very much.

[pr2]

Hi,

There will be no more version of JaZUp, we decide to stop all support to AZbox product.

Moreover please don't use anymore JaZUp since with kernel 3.4.4 RTi team change the boot value in Yamon.
You needs to use setxenv to change it, this is not implemented in JaZUp 2.6.

Even to return from kernel 3.4.4 to old kernel (official firmware or other Enigma2 distro that still use old kernel) don't use JaZUp, this will brick your Azbox.

My small gift to you is the command to send to change the boot parameter in Yamon:

To boot kernel 3.4.4


setxenv -f /dev/mtdblock0 -k y.start -v \""dump romfs 0xac080000;load zbf 0xac080090; go"\"


To boot older kernel (official or old Enigma2)


setxenv -f /dev/mtdblock0 -k y.start -v \""xrpc 0xac080090; load zbf 0xb3000000; go"\"


If you don't know what those lines means, don't play with them, I am not responsible of Azbox brick. But people that already brick their Azbox and with Yamon cable can probably take advantages of this information. :-)

So we know what to do to add support for kernel 3.4.4 in JaZUp but we decide to no longer release any version of JaZUp, for us this is an old story now.
We would like to thanks donators that support us so far, release 2.6 was already created for them, but now it's time for us to use our skills on other projects.

Pr2 & Hectore

[nokixxx]

Hi,

There will be no more version of JaZUp, we decide to stop all support to AZbox product.

Moreover please don't use anymore JaZUp since with kernel 3.4.4 RTi team change the boot value in Yamon.
You needs to use setxenv to change it, this is not implemented in JaZUp 2.6.

Even to return from kernel 3.4.4 to old kernel (official firmware or other Enigma2 distro that still use old kernel) don't use JaZUp, this will brick your Azbox.

My small gift to you is the command to send to change the boot parameter in Yamon:

To boot kernel 3.4.4


setxenv -f /dev/mtdblock0 -k y.start -v \""dump romfs 0xac080000;load zbf 0xac080090; go"\"


To boot older kernel (official or old Enigma2)


setxenv -f /dev/mtdblock0 -k y.start -v \""xrpc 0xac080090; load zbf 0xb3000000; go"\"


If you don't know what those lines means, don't play with them, I am not responsible of Azbox brick. But people that already brick their Azbox and with Yamon cable can probably take advantages of this information. :-)

So we know what to do to add support for kernel 3.4.4 in JaZUp but we decide to no longer release any version of JaZUp, for us this is an old story now.
We would like to thanks donators that support us so far, release 2.6 was already created for them, but now it's time for us to use our skills on other projects.

Pr2 & Hectore
hallo pleas Pr2 & Hectore help.
command edit dev/disk1 to edit paritions format domm.
My domm cf card 8Gb.
Thank you very much.