how to add a cline with blackhole?

[halfax]

using blackhole image, thanks

[donki]

Put Sealion in cfg file and FTP to box from pc.

[THC]

Paste the c line into the CCcam.cfg file and save it.

FTP the CCcam.cfg file to the etc folder on the Duo.

Restart CCcam from the blue panel.

[halfax]

still having a problem my cline was added manual on spiderbox, in domain , port, userid and password
any ideas what i do /
thanks

[halfax]

have ftp in the etc file reboot ccam still nothing.
is there a file in the etc i have to put it in ?thanks

[DCG]

you put it in your cccamd config file

[halfax]

thanks to all who replied still not working
have put it in etc ,cccamd config file .
i am drag and dropping is that wrong?

[donki]

If you have cccam.cfg in etc and cccam started then all should work.

Have you looked at the file in etc to inspect its contents? Might be that paste failed? Check the format against the sealion you were given. Silly question but you are certain the sealion is a good un?
Also check the attributes on cccam.cfg and make sure read & execute for all are enabled. If numerical then set it to 755 or 777 and try again.

[halfax]

thanks again, was using sealion this morning in spiderbox

not understanding this bit-o check the attributes on cccam.cfg and make sure read & execute for all are enabled. If numerical then set it to 755 or 777 and try again.

[davemaden]

make sure you have pasted c line onto an empty line i.e. without the hash key

[DCG]

have you copyed your cccamd file to desk top then opened with note pad and added your c line then saved the file then copyed it to your config file then restarted cccamd

[THC]

The file name is case sensitive so make sure the file name is called CCcam.cfg
If you've created the CCcam.cfg file in Windows notepad it's probably called the file CCcam.cfg.txt which is no good.

Use the rename option in your FTP program to rename the file to CCcam.cfg

Then FTP CCcam.cfg to the etc folder and restart CCcam. That's all you have to do.

[tr8.]

If you have loaded CCcam you will find the existing one already in image.
This one must be replaced when you FTP over using vucc 0.5.
You do not need to reboot it will start within a minute.

One other point you have told it to use Cccam.
Go to channel, press blue button.
what cam is sellected it should be CCcam at top, use left and right to select.

[halfax]

first off thanks to evryone for trying to help, it will be something stupid i am doing
have flashed duo to another blavk hole image , install another ccam
still same have treid dream editor as well
have only used spiderbox and it was a case of adding
Domain: @@@@.@@@.com
Port: 12000
Userid: @@@@
password: @@@@@
i have put c: and the following together leaving a gap between each
used the ccam cfg and changed attributes to 755
still nothing with ccam 2.12. active

also have replaced file in etc
thanks again

[echelon]

here is an example of a c line

C: hostname.no-ip.org 12000 name2 password2 no

replace the hostname , port , name and password with your own

as long as the c line is in the installed or replaced cccam.cfg file in var/etc, and if cccam emu is selected and running the system should work

I use flashfxp to edit the file in situ or to ftp a replacement one over

plenty of info on this in the dreambox newbie forum

[halfax]

up and running used flashxp!!!! worked

a big thanks to everyonre