Biss keys 10e for PLtv/Chelsea on 11387V

[SHARK 2]

I can open either PLtv or Chelsea TV with current Biss keys.
Q) As these keys are different and the frequency of 11387V is common when I add the second set of keys I loose the first channel ???

I have used 0000 for ECM_PID which works but I can't get these two channels to open without putting in the various Biss Keys again.
There must be a way around this but I can't find it HELP PLEASE

Is there two ECM_PID other than 0000 for each channel

Box Spider HD9000

Regards SHARK 2

[paul smith]

shark i think this has already been mentioned m8.,,,
leave a gap of at least 5 digits,, between the freq , when you go to
scan the channels as follows under menu -manual scan
eg... 11382V 11387v 11392v
when you have the channels listed on your channel list..
Then go to menu key edit Biss and enter also. EXACTLY THE SAME.... LEAVE the ecm bit as it shows already 0000
enter the keys for EACH channel required...
The end result is you can then go , between the channels with no hassle.
( hope that helps )

[SHARK 2]

THANKS Paul
yes that worked now have Chelsea TV on Freq. 11382 & both OK

Best Regards SHARK 2 :respect-067::respect-067:

[sat_rrstm]

Please allow me to mark that a gap of 3 digits would also do the trick and should be prefered,
because the space that would be saved could be useful for other similar frequencies
using biss keys on other satellites,e.g. 11389 H on Amos that transmits 4 biss ch's!!!

[TonyO]

I loaded the keys a few weeks ago and they are still working ok. :respect-054: