View Full Version : TM 500s
Just got one of these to have a play wityh, quite different from my VU etc, what I miss is the ability to edit/ftp that I get with E!/E2 Dreambox control centre. Is it me ,can this be made to work with TM 500s or is mthere a sijilar piece of software that works in a similar fashion.
tia
sleepy
25-04-2012, 10:14 AM
Once you've given yourself a password with Technomate control centre you can use with DCC, just the same as DM500.
I only use the TM software to load images, everything else is done with DCC 1.3.2. and DreamBox edit.
Hope that helps m8.
digicon
25-04-2012, 10:20 AM
Pretty much every other software that works with an E2 receiver should work with the E1 TM500s, I have one also and all my programs that i use work with it no problem
echelon
25-04-2012, 12:23 PM
you should be able to use DCC as digicon says, or any ftp program like flash fxp or filezilla , same as on any linux box , definitely work ok on my tm9100
dreamboxedit and dreamset should also work ok too , so I cannot see why you cannot use the standard tools we all use on this E1 box same as we do on E2 boxes
Thanks for all your replies, I will try and see where I can enter a password as telnet doesn't come up in DCC .Dcc finds my box and connects OK but the left hand panel ( The Box ) remains blank,and I can' use telnet to enter a passwd.
sleepy
25-04-2012, 07:57 PM
As i said "Once you've given yourself a password with Technomate control centre" you will use that password to log into DCC.
user: root
password: "your password"
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.