PDA

View Full Version : HDF-Flasher-V600.09 Bootloader ID Changer for Icecrypt STC6000



JTH_58
17-05-2012, 09:58 AM
This plugin allows you to change the reseller id in your receiver's bootloader so other firmware(s) from similar receivers may be loaded.
I consider converting a receiver to run other software to be an advanced technique. Do not try this plugin unless you know what you are doing. The main features in the firmware will be mostly the same in all of these receivers, so doing a conversion will probably not allow you to gain much.

You cannot expect any warranty coverage for a receiver that has been altered to run a different firmware and does not work.
Use at Your Own Risk!... However, I have changed an Octagon to Icecrypt with no Problems...


List of receivers that can be converted with this plugin:

HX-8200 (Combi Tuner) ==> LD 6.00

Quellcode
0x230000A0 Fortis HX-8200
0x230100A0 Rebox RE-8000
0x230200A0 Octagon SF-1028P
0x230300A0 Atevio AV 7500
0x230400A0 Skyway Droid
0x230500A0 Openbox S9
0x230600A0 Icecrypt STC6000
0x230700A0 Miraclebox 9
0x230900A0 XCruiser XDSR600
0x231800A0 Optibox Raptor
0x231900A0 Forever HD-8200 [09]
0x232200A0 SkyS@t Royal
0x232700A0 Mediastar 8200s

Access Code = 0815

Note:
The Openbox S9 listed here refers to the orginal linux Openbox before the name was cloned and became common in North America. The Raptor will not run Ali Openbox S9 firmware!

naveed
23-02-2013, 03:00 PM
:respect-050:
goodddddddd

wadhwan
01-03-2013, 04:12 AM
Can this be used on Skyway Classic 3? Thanks,